• 대한기계학회논문집
• /
• 제13권4호
• /
• pp.689-696
• /
• 1989

본 실험에서는 종래와는 달리 먼저 입출구 부분에서 입자분포 측정장치를 이용하여 실험함으로써 여러 가지 입자크기에 대하여 동시에 효율을 구할 수 있는 장치를 구성하고 앞에서 열거한 여러 가지 실험인자중 레이놀즈수와 S/W를 변화시키면 서 일단 슬릿 임팩터(one-stage slit impactor)의 효율을 .root.Stk에 따라 구하여 일단 임팩터 뿐만 아니라 다단 임팩터(multistage impactor)에 대한 설계기초자료를 마련하 고자 한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.67-68
• /
• 2016

The accurate measurement of magnet power supplies (MPS) output currents is essential to delivering stable and repeatable currents to magnets in particle accelerators. An essential element in guaranteeing and evaluating the required performance is the current measurement device and methode. In this paper, we discuss instrument and methods for precision current measurement and performance of the PLS-II MPS.

• 한국생산제조학회지
• /
• 제22권3_1spc호
• /
• pp.537-543
• /
• 2013

A water-$Al_2O_3$ nanofluid was manufactured, and its thermal conductivity was measured in this study. The measurement was performed at volumetric concentrations of 0.5%, 1%, 2%, and 3%, and the nanoparticle sizes were 20 nm and 70 nm. Experimental test equipment, using the transient hot wire method, was installed to measure the thermal conductivity of the nanofluid, and the measured results were confirmed by measuring pure water with a measurement error of 0.92% at $20^{\circ}C$. The thermal conductivity enhancement ranged from 4.8% to 13.6% for the 20 nm particle size, and from 3.1% to 8.8% for the 70 nm particle size at a concentration range of 0.5% to 3%. The enhancement increased with a decrease in particle size and an increase in concentration. With the elapse of time after manufacturing the nanofluid, the thermal conductivity enhancement decreased significantly from 5 to 9 h, and this trend was measured under all of the measurement conditions. After 24 h, the enhancement ranged from 1.2% to 3.5% for the 20 nm particles, and from 0.6% to 2.3% for the 70 nm particles. The enhancement trends with the elapse of time were almost identical with and without stirring the nanofluid. SDBS (Sodium Dodecyl Benzene Sulfonate) was added as a dispersing agent, and the decrease in the thermal conductivity enhancement was delayed.

• 한국분말재료학회지
• /
• 제20권2호
• /
• pp.129-133
• /
• 2013

In this paper we have studied the effect of water droplet size on nano-particle size distribution using SMPS(Scanning Mobility Particle Sizer)system. It can be seen that the unknown peak at >100 nm was caused by water droplets which did not dry completely when DI water was used as a solvent in the SMPS system. Therefore, it is important to dry water droplets generated from atomizer in the SMPS system when measuring the particle size distribution using less than 100 nm nano-particles in diameter. From this study, It can be concluded that the napion was a useful material as dryer ones and using EAG(Electro Aerosol Generator) as a particle generator was the most effective in reducing the effect of water droplets.

• 제어로봇시스템학회논문지
• /
• 제17권9호
• /
• pp.947-953
• /
• 2011

Radome aberration error causes degradation of miss distance as well as stability of high maneuver missile system with RF seeker. A study about radome compensation method is important in this kind of missile system design. Several kinds of methods showed good compensation performance in their paper. Proposed adaptive Particle filter estimates line of sight rate excluding the radome induced error. This paper shows effectiveness of adaptive Particle filter as compensation method of radome aberration error. Robust performance of this filter depends on external aiding measurement, target acceleration. Tuning of system error covariance can make this filter unsensitive against the error of target acceleration information. This paper demonstrates practical usage of adaptive Particle filter for reducing miss distance and increasing stability against disturbance of radome aberration error through performance analysis.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.802-805
• /
• 2003

The ion-induced secondary electron emission coefficient ${\gamma}$ for MgO thin film with $O_{2}$ plasma treatment has been investigated by ${\gamma}$-FIB (focused ion beam) system. The MgO thin film deposited from sintered material with $O_2$ plasma treatment is found to have higher ${\gamma}$ than that without $O_{2}$ plasma treatment. The energy of $Ne^{+}$ ions used has been ranged from 100eV to 200eV throughout this experiment. It is found that the highest secondary electron emission coefficient ${\gamma}$ has been achieved for 10 minutes of $O_{2}$ plasma treatment.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.748-751
• /
• 2003

The electron temperature and plasma density in coplanar alternating-current plasma display panels (AC-PDPs) have been experimentally investigated by a micro Langmuir probe and the high speed discharge images in this experiment.

• 한국세라믹학회지
• /
• 제33권5호
• /
• pp.547-555
• /
• 1996

Porous alumina ceramics were fabricated by pseudo-boehmite phydosol-gel process within/without commercial $\alpha$-alumina particles average 1 and 40 micron respectively. The pore characteristics of fired specimens were studied by the measurement of bulk density total porosity thyermal analysis pore volume pore distribution BET area XRD and SEM. with increasing of firing temperature pore volume and BET surface area were decreased and the average pore size was increased to approximately 146$\AA$ upto 80$0^{\circ}C$ by de-watering of [OH] and formation of $\alpha$-alumina. The fired relative density of the alumina-dispersed specimen with average 1 micron particle was increased with the amounts of dispersed particle by bimodal packing theory which is compared to the ones of specimen including of average 40 micron particle. It was confirmed that the percola-tion threshold in porous ceramics with coarser particle (40 micron) has formed between the transformed-alumina from hydrogel and dispersed-alumina of above 50 vol% particle and the total porosity was increased at the threshold point above.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.2227-2232
• /
• 2003

For a reasonable analysis of grade efficiency of cyclone separator, in-line measurements of particle size and particle concentration are needed. The purpose of this study is to define the correlation of measurement data and to measure grade efficiency and pressure drop. The authors adapted that the grade efficiency could be calculated directly from the counted particle numbers. The problem of collection efficiency calculation was different from counting rate of aerosol counters under the same conditions. It is important factor to use the rate of the particle counters to obtain reliable results. Therefore, the authors should use and calculate compensation factor considering sensitivity of aerosol counters, gas velocity and concentration affect higher 30% than originally measured grade efficiency. As the pressure drop and grade efficiency increase, as flow rate increase and then also pressure drop and grade efficiency increase.

• 설비공학논문집
• /
• 제9권3호
• /
• pp.268-275
• /
• 1997

Using the film-based particle image velocimetry, natural convective flows have been measured quantitatively in a rectangular enclosure with a heater located on the bottom surface. The success rate of the present interrogation method has been obtained as a function of the number of particle pairs and the distance between the particle pairs. The influence of the diffraction halo at the center have been effectively eliminated by rotating-subtracting the original Fourier-transformed image. By utilizing the coded multiple pulsed illumination with two different time intervals, the minimum measurable velocity have been improved. The results of the velocity distributions and the heat transfer correlations have been obtained for different locations of heater in the enclosure.