• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
• /
• pp.195-198
• /
• 2001

We developed the portable blood analysis system, which can be measured pH of the blood. This system is composed to electronic circuit, mechanism, and system software. Electronic circuit is composed to the sensor, pre-amp part, temperature regulation part, fluid sensing part, A/D(analog to digital) conversion part, main and peripheral device processing part. And the mechanism is composed to the flow cell and the liquid flow part. The liquid flow part is consisted of blood and washing control system under the control of the 6-channel solenoid valve and syringe rump. The system software is composed to measurement program, calibration program, washing and diagnostic program. The program of each routine is designed as sequential process for an efficiency. And the portable pH analysis system used two-point calibration method using the two types of corrective liquid. As a result, we obtained the calibration curve and calculated the value of pH. For verifying the system, we confirmed the output voltage of the sensor, and estimated reappearance of system using the standard liquid.

• 한국보건간호학회지
• /
• 제5권1호
• /
• pp.70-95
• /
• 1991

The ageing problem of the population has been emerging in Korea since 1970's so that it is expecting the elderly 65 years and over among the total population from $4.5\%$ in 1988 to be $6.3\%$ in year 2000. This study was conducted to provide secure policy development in coming years for the aged on medical and health care aspects based on the examining current status of the aged problems and health care policies and systems. The study divided into four parts; The first part examined the medical insurance program and public assistance program of the health services in relation to the aged. The second part emphasized on reduction of medical care cost for the aged. The third part studied the regular health check-up program and health education for the aged. The fourth part examined the chronic disease management programs for the aged and strategies of the health care service quality improvement and specialized programs. The following recommendations made as the results of the study. 1. At present, the medical insurance program and public assistance program for the medically indigent is not appropriate to the elderly because it is a part of general medical insurance program so that Health Security Law for the Aged is proposed. 2. Medical cost will be increased due to the high occupancy rate of hospital beds and long stay of the elderly so that it is recommended to develop an early discharge program, home health care program, Health hospice and an althernative programs. 3. At present, a regular health check-ups for the elderly is not included in medical insurance program so that it is recommended to be included in the insurance program and at the same time health education program thoroughly developed for the aged. 4. To make proper medical and nursing services on chronic diseases for the elderly, it is recommended manpower development, specialized clinics or hospitals, nursing homes and an equivalent long term care facilitices should be established on the community based and a research institutions also to be related to supper the care programs.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제44권3호
• /
• pp.397-408
• /
• 2005

This research developed self-directed teaming program for students who learn mathematics to improve their abilities for learning mathematics. A small-group cooperative teaming model was based on the self-directed loaming program which this research developed. The main target of this program was the second grade students of middle school. The program was consisted with three developing parts. The part 1 of program developing was consisted with analyzing and reconstructing mathematics curriculum, devising small-group cooperative learning program, and structuring teaching and teaming plans. The part 2 included the management of small-group cooperative Loaming and how to use the materials which this research developed. The part 3 provided various cooperative learning opportunities for students to improve their abilities for loaming mathematics.

• 천문학논총
• /
• 제30권2호
• /
• pp.275-278
• /
• 2015

We studied a cluster family in the northern part of the Carina Nebula (NGC 3372) a group of clusters near NGC 3324 (Tr 15, NGC 3293, Loden 165, Loden 153 and IC 2581). We used data from UCAC4 to determine the cluster's membership and the near infrared CMDs of each cluster. We analyzed the spatial density and elongation as a function of radius for each cluster and found a possible interaction between NGC 3293 and Loden153. However, the shape distortion of NGC 3324 cannot be evaluated because of the inhomogenity in the coverage of UCAC4 in the east part of NGC 3324.

• Journal of the Korean Wood Science and Technology
• /
• 제35권4호
• /
• pp.38-44
• /
• 2007

환경문제의 대두에 따라 포름알데히드를 방산하는 접착제를 대신할 수 있도록 로진을 이용한 천연접착제를 개발하고자 한다. 경화속도와 접착물성을 향상시키기 위해 건조제의 배합에 따라 천연접착제를 제조하였다. 건조제의 배합에 따른 경화속도와 접착물성을 Texture Analyzer를 이용하여 얻어진 tack값과 single lap shear test를 통해 얻어진 접착력을 기반으로 평가하였으며, 외국에서 사용되고 있는 AURO, BioFa, Livos의 식물계 천연접착제와의 성능을 비교 분석하였다. 최적의 배합비는 Co 0.7 part, Zr 1.0 part, Ca 0.5 part, Activ8 0.1 part를 첨가하였을 때이며, 이 때의 접착력은 $93.2{\pm}19.1N/cm^2$의 수준에 도달하였다.

• 대한기계학회논문집B
• /
• 제20권7호
• /
• pp.2409-2420
• /
• 1996

This paper describes the development of a general program for the design and part load performance analysis of single-shaft-heavy-duty gas turbines. Efforts are made to fully represent the real component features by the characteristic models and special emphasis is put on the modeling of cooled turbine stages. The design analysis routine is applied to simulate the performance of current gas turbines and its appropriateness for system analysis is validated. Meanwhile, the component parameters of real engines which describe the technology level are obtained. The program is extended to predicting the part load operation of gas turbines with the aid of models for the off-design characteristics of compressor, turbine and other main components. Part load simulation can be carried out only with limited numbers of input data. It is demonstrated that the program accurately estimates the part load characteristics of real turbines.

• 항공우주기술
• /
• 제1권2호
• /
• pp.173-178
• /
• 2002

전자부품 높은 신뢰성이 요구되며 극한의 운용 환경을 견디어야 하는 우주 프로그램에는 High-Reliability Part로 분류되는 Class S 이상의 Microcircuit, JANS 급 이상의 Discrete Semiconductor, 그리고 ER(Established Reliability) 등급 R 수준 이상의 Passive 소자들이 주로 사용된다. 그러나 일부 부품에 대해서는 High-Reliability Part로서 검증되지 않은 이른바 비표준 부품을 사용해할 경우가 빈번하게 생기고 있다. 이 경우 위성의 제작자는 자체적으로 부품을 검증하여 잠재적인 결함이 있는 부품들을 Screening할 수 있어야 한다. 본 기술 논문에서는 아리랑위성 1호기 및 2호기 개발을 통해서 이루어진 부품 검증과정을 간략히 소개하고자한다.

• 한국과학교육학회지
• /
• 제6권2호
• /
• pp.43-52
• /
• 1986

It is the purpose at thus survey to get hold at problems in teaching integrated science in middle school. For this purpose, problems and suggestions were collected by questionnaire which were made out by middle school science teachers. Through the analysis of the questionnaire, it was found that the present curriculum of science education in the college of education and the in-service training program were not suitable for training middle school science teacher. Form the results of the analysis, this survey concluded that the curriculum and program mentioned above need improvement as follows. (1) science education curriculum in the college of education should be set up with two part. One is the part that middle school science teachers are trained and the other is the part that high school science teachers are trained. (2) In-service training program should be set off into two kinds. One is the program that middle school science teachers are trained and the other program that high school science teachers are trained.

• 대한조선학회지
• /
• 제15권4호
• /
• pp.20-23
• /
• 1978

This paper describes newly developed part generation program on the basis of ACUTE. New program named as ASEP(Automatic Separation Program) has function to separate a contour defined by ACUTE into several parts and store them in the part file. The separation flow is as follows, (1) Basic Contour Generation using ACUTE (2) Separation Line Definition (3) Separation into several parts (4) Storing parts in the part file with their individual name The merit of ASEP is to reduce the number of input cards and to simplify input statements.

• 대한지역사회영양학회지
• /
• 제14권1호
• /
• pp.31-42
• /
• 2009

The purpose of this study was to develop the website-based program for individual meal planning. The program consisted of the basic information of clients, dietary habits, analysis of nutrient intakes and menu planning. The first part of the program consisted of general information such as general characteristics and anthropometric data of clients. The second part was designed to investigate the dietary habits, food intake frequency, nutrition knowledge, and drinking and smoking habits of the clients. The third part consisted of analysis of nutrient intakes including three major nutrients, calorie intake by foods and alcohol, and ratio of individual fatty acid intake. Nutrient intakes was evaluated by comparing with dietary reference intakes. In the final part, the program included the menu planning by using standard recipe. This system was also designed to insert, remove or change the food items or amount according to the user need. It is expected that the development of a meal planning system based on the internet can facilitate the professional dietary counseling, and thus help to improve the health of people.