• Journal of the Korea Society of Computer and Information
• /
• v.4 no.4
• /
• pp.25-33
• /
• 1999

Exchanging parametric curves and surfaces between different geometric modeling systems often require degree reductions to approximate the curves and surfaces to the degree of supporting systems within the given tolerance. This paper is a research for approximate conversion of a degree reduction methods for Bezier curves in the data exchange between the different systems. Our approximate conversion is implemented that shows the experimental results with the others to reduce the degree from the given degree n to n-1 for the Bezier curves about the different degree reductions.

• Korean Journal of Optics and Photonics
• /
• v.4 no.4
• /
• pp.452-456
• /
• 1993

The quantum efficiencies of photomultiplier tubes were measured by counting the coincidence photon pairs generated in the process of spontaneous parametric down-conversion. They were measured within 3% accuracy over the range of wavelength from 560 to 850 nm without any standard light source or detector. The values for 633 nm correspond to those obtained with a calibrated laser power meter within the measurement error.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.5
• /
• pp.1338-1346
• /
• 1994

The objective of this study is to investigate the effect of various parameters, such as temperature, mean current density and voltage on the performance of phosphoric acid fuel cell (PAFC) by numerical analysis. Two types of flow passages, which are Z-parallel type and Z-counter type, are evaluated to obtain the best current density and temperature distribution. Parametric studies and sensitivity analysis of the PAFC system's operation in single cell are accomplished. A steady state simulation of the entire system is developed using nonlinear ordinary differential equations. The finite difference method and trial and error procedures are used to obtain a solution.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.739-744
• /
• 2004

This paper presents an adaptive approach to control the amount of slip of the torque converter bypass clutch using its estimated friction coefficient. The proposed approach can be readily implemented using the inexpensive speed sensors currently installed in an automobile. A measurement feedback control law to drive the slip error to zero together with an adaptation law to identify the unknown friction coefficient is developed using the Lyapunov control design method. The robustness of the control and adaptation laws to parametric and/or torque uncertainties as well as the convergence of the friction coefficient are investigated. Simulation results verify the viability of the proposed control algorithm in real-world vehicle control applications.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.846-851
• /
• 2004

In this paper, a sliding mode control based on disturbance observer is proposed to attenuate disturbance responses in an active magnetic bearing system, which is subject to base motion. An algorithm for exactly decoupling the disturbance estimation dynamics from the sliding mode dynamics is developed. It is also shown that the proposed method preserves the robustness of the sliding mode and asymtotically achieves zero regulation error, in the presence of external disturbances and parametric uncertainties. The proposed control is applied to a 2-DOF active magnetic bearing system subject to base motion. The feasibility of the proposed technique is illustrated, and the results of an experimental demonstration are shown.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2280-2285
• /
• 2008

A general flow distribution model and a simple process of numerical analysis, which can be applied to multi-pass systems with manifolds, are presented. Correlations are derived from the discrete model, and numerically calculated using a modified equal pressure method. The predicted pressure distribution agrees well with the available experimental results of other researchers with the average error less than 2% for 10 branch manifolds, and 4% for 20 branch manifolds. A parametric study is performed to demonstrate the effect on the flow distribution.

• Journal of the Korea Society for Simulation
• /
• v.14 no.3
• /
• pp.147-154
• /
• 2005

In conventional approaches such as a functinal approach or a parametric approach to online signature verification, which could not deal with the local shape of signature, much various important informations inherent in the local part of signature shape have been overlooked. In this paper, we try a structural approach in which a signature is represented as a structural form of handwriting primitives and the local parts along a signature handwriting can be selectively compared according to their discrimination power in the process of signature verification, As a result, the error rate is diminished in the case that the weights of subpattern units is applied into comparing process, which is the degree of discrimination power of local part. And also, the global variation and complexity of each signature extracted from the analysis of local shape is found useful in determining the decision threshold more precisely.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.6
• /
• pp.62-70
• /
• 2008

An adaptive fuzzy backstepping controller is proposed for the motion control for a single-link flexible-joint robot in the presence of parametric uncertainties. Fuzzy logic system is used to approximate the uncertainties of functions and a backstepping technique is employed to deal with the mismatched problem. A compensation controller is also employed to estimates the bound of approximation error so that the shattering effect of the control effort can be reduced. Thus the asymptotic stability of the closed loop control system can be obtained based on a Lyapunov synthesis approach. Numerical simulation results for a single-link flexible-joint robot are included to show the effectiveness of proposed controller.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.419-422
• /
• 2004

The paper classified SI schemes for structural engineering applications based on the type of measured data. Only parametric SI algorithms with optimization processes were reviewed where optimal structural parameters are estimated by minimizing an output error between measured and computed responses. Some important issues in applying SI schemes were analyzed with the definition of an analytical model, noise and sparseness in measured data. As a sample study, the application of a nonlinear time-domain SI algorithm for a shear building was examined.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.11 no.4
• /
• pp.1-5
• /
• 1982

In this paper, a study is made of the steady laminar free convection boundary-layer equations on a sphere with uniform surface heat flux. To solve the boundary-layer equations, well-known Pohlhausen's simiarity solution for vertical plates is adopted just the same for spherical bodies by introducing twonondimensional parametric functions, so called azimuth functions. To determine the values of the azimuth functions which are expressed in series at the two points (the upper stagnation point and the equator), trial and error method is required. It is concluded that the heat transfer results are in good agreement with obtained from perturbation method and Von Karman-Pohlhausen method within the steady laminar free convection region for Pr=0.70.