• Journal of the Korean Society for Railway
• /
• v.8 no.1
• /
• pp.1-5
• /
• 2005

This paper has presented the parallel cyclic redundancy check (CRC) technique that performs CRC computation in parallel superior to the conventional CRC technique that processes data bits serially. Also, it has showed that the implemented parallel CRC circuit has been successfully applied to the inductively coupled passive RFTD system working at a frequency of 13.56㎒ in order to process the detection of logical faults more fast and the system has been verified experimentally. In comparison with previous works, the proposed RFID system using the parallel CRC technique has been shown to reduce the latency and increase the data processing rates about 15％ In the results. Therefore, it seems reasonable to conclude that the parallel CRC realization in the RFID system offers a means of maintaining the integrity of data in the high speed RFID system.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.6 s.312
• /
• pp.40-47
• /
• 2006

This paper introduces an efficient CRC logic partitioning algorithm to design pipelined parallel CRC circuits aimed at improving speed performance. Focusing on the cases that the input data width is greater than the polynomial degree, equations are derived to divide the parallel CRC logic and decide the length of the pipeline stage. Through design experiments on different types of parallel CRC circuits, we have found a significant reduction in delay by adopting our approach.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1235-1240
• /
• 2004

This paper has presented the parallel cyclic redundancy check (CRC) technique that performs CRC computation in parallel superior to the conventional CRC technique that processes data bits serially. Also, it has showed that the implemented parallel CRC circuit had been successfully applied to the inductively coupled passive RFID system working at a frequency of 13.56MHz in order to process the detection of logical faults more fast and the system had been verified experimentally. In comparison with previous works, the proposed RFID system using the parallel CRC technique has been shown to reduce the latency and increase the data processing rates in the results. Therefore, it seems reasonable to conclude that the parallel CRC realization in the RFID system offers a means of maintaining the integrity of data in the high speed RFID system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9A
• /
• pp.1101-1107
• /
• 2004

This paper presents an optimization algorithm and technique for designing parallel Cyclic Redundancy Check (CRC) circuit, which is most widely adopted for error detection A new heuristic algorithm is developed to find as many shared terms as possible, thus eventually to minimize the number and level of the exclusive-or logic blocks in parallel CRC circuits. 16-bit and 32-bit CRC generators are designed with different types of Programmable Logic Devices, and it has been found that our new algorithm and architecture significantly reduce the delay.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.333-340
• /
• 2018

This paper introduces a BCH code decoder using parallel CRC(: Cyclic Redundancy Check) generation. Using a conventional parallel syndrome generator with a LFSR(: Linear Feedback Shift Register), it takes up a lot of space for a short code. The proposed decoder uses the parallel CRC method that is widely used to compute the checksum. This scheme optimizes the a syndrome generator in the decoder by eliminating redundant xor operation compared with the parallel LFSR and thus minimizes chip area and propagation delay. In simulation results, the proposed decoder has accomplished propagation delay reduction of 2.01 ns as compared to the conventional scheme. The proposed decoder has been designed and synthesized in $0.35-{\mu}m$ CMOS process.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.896-900
• /
• 2018

Traditionally, Linear Shift Feedback Register (LFSR) has been widely employed to implement Cyclic Redundant Check (CRC) codes for a serial input. Since many applications including network and storage systems demand as high throughput as ever, various efforts have been made to implement CRC hardware to support parallel inputs. Among various parallel schemes, the look-ahead scheme is one of the most widely used schemes due to its short critical path. However, it is very cumbersome to design HDL codes for parallel CRC codes since the look-ahead scheme is inevitable to consider how register and input values move in the next cycles. Thus, this paper proposes a novel CRC hardware generator, which automatically produces HDL codes given a CRC polynomial and parallel factor. The experimental results verify the applicability to use the proposed generator by analyzing the synthesis results from the generated HDL code.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.1
• /
• pp.83-91
• /
• 1993

In the digital transmission system, cyclic redundancy check(CRC) code is widely used because it is easy to be implemented and has good performance in error detection. CRC code generator consists of several shift registers and modulo 2 adders. After manipulation of input data stream in the encoder, the remaining value of shift registers becomes CRC code. At the receiving side, error can be detected and corrected by CRC codes immediately transmitted after data stream. But, in the high speed system such as an A TM switch, it is difficult to implement the serial CRC encoder because of speed limitation of available semiconductor devices. In this paper, we propose the efficient parallel CRC encoder and syndrome calculator to solve the speed problem in implementing these functions using the existing semiconductor technology.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.1
• /
• pp.29-34
• /
• 2016

A controller area network (CAN) controller is an integral part of an electronic control unit, particularly in an advanced driver assistance system application, and its characteristics should always be advantageous in all aspects of functionality especially in real time application. The cost should be low, while maintaining the functionality and reliability of the technology. However, a CAN protocol implementing serial operation results in slow throughput, especially in a cyclical redundancy checking (CRC) unit. In this paper, digital signal processing (DSP) algorithms are implemented, namely pipelining, unfolding, and retiming the CAN controller in the CRC unit, particularly for the encoder and decoder sections. It must attain a feasible iteration bound, a critical path that is appropriate for a CAN system, and must obtain a superior design of a high-speed parallel circuit for the CRC unit in order to have a faster transmission rate. The source code for the encoder and decoder was formulated in the Verilog hardware description language.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.789-792
• /
• 2005

In this paper, we propose a method that applies pipeline architecture to parallel CRC circuits. We developed a logic partitioning algorithm for applying pipeline architecture. Our algorithm can be used for the polynomial and the input data width, both of arbitrary length and minimize the logic level. Design experiments show the superiority of our approach in reducing the delay in comparison with previous works.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.11
• /
• pp.1655-1662
• /
• 1993

In this paper we discuss three algorithms-Direct, Successive, and Recursive-on parallel CRC(Cyclic Redundancy Check) verification. The algorithms are derived by combining the byte-syndromes precomputed from the generator polynomial. These algorithms are compared in terms of the amount of hardware and the speed of operation. Since the algorithms can be generalized easily, we took the ATM cell delineation example for easier description. As an application of the algorithm Recursive, an ATM cell delineation module suitable for STM-1 transmission has been successfully realized through commercially available field programmable gate arrays.