• 대한치과교정학회지
• /
• 제22권1호
• /
• pp.169-177
• /
• 1992

This investigation was carried out in order to find out changes in head postures and in craniofacial morphology, in relation to the inclination of cervical column. For this study 85 subjects, consisting 39 males and 49 females, between the ages of 7 to 24 years old were chosen, and following results were observed after analysing the correlation coefficients between each structures. 1. No definite relationships were observed between the inclination of cervical column (CVT/HOR) and the inclination of anterior cranial base (SN/VER) 2. No definite relationships were observed between the inclination of mandibular ramus (RL/HOR) and the inclination of mandibular inclination (MLP/VER). 3. In subjects with anteriorly inclined cervical column, increase in mandibular plane inclinations (ML/VER) were observed. 4. No definite relationships were observed between the inclination of cervical column (CVT/HOR) and changes in palatal plane (NL/VER).

• Restorative Dentistry and Endodontics
• /
• 제10권1호
• /
• pp.183-186
• /
• 1984

Thirty maxillary lateral incisors were injected with china ink, decalcified, cleared and used in an in vitro study to determine the number of root canals, the frequency and location of lateral canals, the location of apical foramens, the frequency of apical deltas, and the curvature of root canals. The results were as follows: 1. Most of the teeth demonstrated single canal, but 6.7% of the teeth were found to have bifurcated canals. 2. Of the 32 canals studied, 37.5% of the canals were found to have lateral canals and these ramifications were usually located in the and apical third of the root. 3. 9 apical foramens were located directly on the root apex and 21 foramens laterally. 4. 3 canals showed mesial curvature, 20 canals distal curvature, 4 canals labial curvature, and 3 canals palatal curvature.

• 대한소아치과학회지
• /
• 제47권1호
• /
• pp.25-35
• /
• 2020

이 연구의 목적은 CBCT를 사용하여 유구치 치근 및 근관의 형태학적 특징을 평가하는 것이다. 과잉치 발거를 위해 전남대학교 치과병원 소아치과에 내원하여 CBCT를 촬영한 만 4 - 5세 환자 총 68명의 영상으로 연구를 진행하였다. 치근 흡수가 되지 않은 상악 제1유구치, 상악 제2유구치, 하악 제1유구치, 하악 제2유구치로 구분하여 분석하였다. 치근 및 근관의 수, 치근 및 근관의 길이와 각도 등의 다양한 변수들이 분석되었다. 상악 유구치는 모두 3개의 치근을 가졌고 원심 협측 치근과 구개 치근은 단일 근관을 가졌다. 한 치근에 2개의 근관이 있는 경우는 오직 상악 제2유구치의 근심 협측 치근에서 발견되었다. 하악 유구치는 대부분 근심과 원심 2개의 치근을 가졌다. 하악의 근심 치근은 대부분 2개의 근관을 가졌다. 치근의 길이와 관련하여, 상악의 구개 치근의 길이가 가장 긴 반면, 원심 협측 치근의 길이는 가장 짧은 것으로 밝혀졌다. 하악 유구치는 근심의 치근이 더 길었다. 상악 유구치에서는 구개 치근의 각도가 가장 컸으나 하악은 근심의 각도가 더 작았다. 상악 유구치의 치근 및 근관이 곡선형이 많은 반면 하악 유구치는 직선형을 더 많이 볼 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제42권1호
• /
• pp.60-64
• /
• 2017

Root canal anatomy is complex, and the recognition of anatomic variations could be a challenge for clinicians. This case report describes the importance of cone beam computed tomographyic (CBCT) imaging during endodontic treatment. A 23 year old woman was referred by her general dental practitioner with the chief complaint of spontaneous pain in her right posterior maxilla. From the clinical and radiographic findings, a diagnosis of symptomatic irreversible pulpitis was made and endodontic treatment was suggested to the patient. The patient underwent CBCT examination, and CBCT scan slices revealed seven canals: three mesiobuccal (MB1, MB2, and MB3), two distobuccal (DB1 and DB2), and two palatal (P1 and P2). Canals were successfully treated with reciprocating files and filled using single-cone filling technique. Precise knowledge of root canal morphology and its variation is important during root canal treatment. CBCT examination is an excellent tool for identifying and managing these complex root canal systems.

• 대한치과교정학회지
• /
• 제9권1호
• /
• pp.85-98
• /
• 1979

This investigation was designed to compare the craniofacial and dental morphology of class III malocclusion with that of normal occlusin in children, and to determine the incidence of various class III craniofacial skeletal patterns. The material selected for this study consisted in standard lateral cephalograms of eighty two Korean children, forty one boys and forty one girls, aged 10 through 12 years, having class III malocclusion, and forty two Korean children, twenty boys and twenty two girls, with normal occlusion in the same age. Using the tracings of the standard lateral cephalograms, various angular and linear measurements were recorded, tabulated and statistically analyzed, and then the class III craniofacial skeletal morphology was divided into various patterns by the degree of SNA and SNB, which respectively were below, within or beyond the normal range of those of normal occlusion. The following characteristics of the craniofacial and dental morphology of class III malocclusion were observed. 1. The cranial base length of class III malocclusion was smaller than that of normal occlusion, and the small saddle angle was a characteristic figure of class III malocclucion. 2. Maxillary length of class III malocclusion was smaller than that of normal occlusion, and point A was retropositioned relative to cranial base but not PNS in class III malocclusion. Maxillary base inclination was not significantly different between the two, but occlusal plane to palatal plane was small in class III malocciusion. 3. The mandibular body length shown no difference between the two, but the mandibular body positioned anteriorly relative to cranial base in class III malocclusion. Ramus height, gonial angle, and mandibular effective length were large in class III malocclusion. Mandibular plane angle and joint angle had no difference between the two, and occlusal plane to mandibular plane angle was large in class III malocclusion. 4. Maxillary incisor inclination was not significantly different between class III malocclusion and normal occlusion, but mandibular incisors positioned and inclined lingually and consequently interincisal angle was large in class III malocclusion. 5. Class III malocclusion was divided into six categories of craniofacial skeletal pattern. The most common class III pattern was found to be one in which the maxilla was within the normal range of prognathism while the mandible extended beyond this range. The pattern in which the maxilla was below the normal range of prognathism while the mandible was within this range was approximately one fifth of the class III sample.

• Imaging Science in Dentistry
• /
• 제46권4호
• /
• pp.251-258
• /
• 2016

Purpose: The aim of this study was to examine the radiographic features associated with impacted premaxillary supernumerary teeth, to determine the relationship between their characteristics and their effects on permanent incisors, and to investigate the types of orthodontic treatment that patients received after the extraction of impacted supernumerary teeth. Materials and Methods: The clinical records and radiographs of 193 patients whose impacted premaxillary supernumerary teeth were removed were retrospectively reviewed, and 241 impacted supernumerary teeth were examined. Cone-beam computed tomographic images and panoramic radiographs were examined to determine the number, location, sagittal position, orientation, and morphology of the supernumerary teeth. Their effects on permanent incisors and the orthodontic treatment received by patients after the extraction of the supernumeraries were also investigated. Results: Supernumerary teeth were most frequently observed in the central incisor region, in the palatal position, in the inverted orientation, and were most commonly conical in shape. The most common complication was median diastema, followed by displacement and delayed eruption of the adjacent incisors. Ten (71.4%) of the 14 odontomas showed delayed eruption of the adjacent incisors. Displacement of the incisors was more frequently observed in association with supernumerary teeth with tuberculate or supplemental shapes. Orthodontic traction was most frequently performed after the removal of odontomas. In 32 cases (13.3%), permanent incisors erupted after the orthodontic creation of sufficient space. Conclusion: Median diastema was most common complication. The delayed eruption of incisors was common in supernumerary teeth with a vertical orientation and an odontoma shape.

• 대한소아치과학회지
• /
• 제35권3호
• /
• pp.504-508
• /
• 2008

유치 맹출전에 치조융기에 가해진 외상은 유치의 맹출 지연 및 형태이상, 치배의 변위 등을 일으킬 수 있으며 심한 경우 구개의 홈 형성, 절치의 결함 및 후천성 구개열 등을 야기할 수 있다. 본 증례는 치아가 맹출하기 전에 수차례의 기관 삽관을 시행한 병력이 있는 심한 저체중아에서 맹출 지연, 형태이상, 법랑질 저형성, 영구치 치배 등의 변위가 관찰되어 이를 보고하는 바이다.

• 대한치과교정학회지
• /
• 제53권5호
• /
• pp.317-327
• /
• 2023

Objective: This study aimed to evaluate the association between low tongue position (LTP) and the volume and dimensions of the nasopharyngeal, retropalatal, retroglossal, and hypopharyngeal segments of the upper airway. Methods: A total of 194 subjects, including 91 males and 103 females were divided into a resting tongue position (RTP) group and a LTP group according to their tongue position. Subjects in the LTP group were divided into four subgroups (Q1, Q2, Q3, and Q4) according to the intraoral space volume. The 3D slicer software was used to measure the volume and minimum and average cross-sectional areas of each group. Airway differences between the RTP and LTP groups were analyzed to explore the association between tongue position and the upper airway. Results: No significant differences were found in the airway dimensions between the RTP and LTP groups. For both retropalatal and retroglossal segments, the volume and average cross-sectional area were significantly greater in the patients with extremely low tongue position. Regression analysis showed that the retroglossal airway dimensions were positively correlated with the intraoral space volume and negatively correlated with A point-nasion-B point and palatal plane to mandibular plane. Males generally had larger retroglossal and hypopharyngeal airways than females. Conclusions: Tongue position did not significantly influence upper airway volume or dimensions, except in the extremely LTP subgroup.

• 대한소아치과학회지
• /
• 제26권1호
• /
• pp.185-199
• /
• 1999

The purpose of the present study was to investigate craniofacial patterns in Korean male and female adults, and to compare morphologic differences between different facial types. In order to get configurational groupings, standardized lateral and P-A cephalograms of 174 Korean adults were measured and analyzed with seven angular, nineteen linear, four ratio, and two index measurements. Ward's minimum variance cluster analysis was employed to divide the sample into groups having similar craniofacial morphology, and thereafter, inductive statistics(t-test) was used to characterize morphologic differences of the divided groups. And also, Pearson correlation coefficients were calculated to assess correlation between the cranial dimensions and upper/lower anterior facial height(UAFH, LAFH) in each facial types for both male and female The results were as follows; 1. There existed sexual dimorphism in most of variables except SN-FH angle, palatal plane angle, facial axis angle, facial index, lower anterior facial height ratio and upper facial height ratio. 2. A brachycephalic headform ($0.84{\pm}0.05$) with leptoprosopic facial form ($0.92{\pm}0.05$) was appeared in male, and a mesocephalic headform ($0.86{\pm}0.06$) with leptoprosopic facial form ($0.92{\pm}0.04$) was exhibited in female. 3. Facial types in both male and female subjects were divided into two groups, Group A (mesoprosopic facial type) and Group B (leptoprosopic facial type). The morphologic differences between Group A and Group B were as follows: a. Cranial measurements including index, angular and linear measurements were not found to be different between Group A and Group B in both sexes. b. Increased UAFH, LAFH, and upper/lower anterior dental heights were exhibited in Group Bs of both male and female. c. In both male and female, ramus height and mandible length showed no difference between Group A and Group B. However, genial angle was found to be larger in Group B than Group A. Therefore, the morphologic differences between two groups in male and female were closely related to less favorable anatomic morphology of the mandible. 4. LAFH and UAFH showed no relationships with cranial dimensions in male and female.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.33.1-33.7
• /
• 2019

Background: The concept of the ideal morphology for the alveolar bone form is an important element to reconstruct or restore the in maximizing esthetic profile and functional alveolar bone restoration. The purpose of this preliminary study is to evaluate the normal alveolar bone structure to provide the standard reference and guide template for use in diagnosing for implant placement, determining the correct amount of bone augmentation in actual clinical practice and producing prostheses based on three-dimensional imaging assessment of alveolar bone. Methods: This study was included 11 men and 11 women (average age, 22.6 and 24.5 years, respectively) selected from among 127 patients. The horizontal widths of alveolar bone of maxilla and mandible were measured at the crestal, mid-root, and root apex level on MDCT (multi-detector computed tomography) images reconstructed by medical imaging software. In addition, tooth dimensions of the central incisors, canines, second premolars, and first molars of maxilla and mandible, including the horizontal width of the interdental alveolar bone crest, were also measured and statistically analyzed. Results: The horizontal alveolar bone width of the palatal side of maxilla showed a distinct increment from the alveolar bone crest to the apical region in both anterior and posterior areas. The average widths of the maxillary alveolar ridge were as follows: central incisor, 7.43 mm; canine, 8.91 mm; second premolar, 9.57 mm; and first molar, 12.38 mm. The average widths of the mandibular alveolar ridge were as follows: central incisor, 6.21 mm; canine, 8.55 mm; second premolar, 8.45 mm; and first molar, 10.02 mm. In the buccal side, the alveolar bone width was not increased from the crest to the apical region. The horizontal alveolar bone width of an apical and mandibular border region was thinner than at the mid-root level. Conclusions: The results of the preliminary study are useful as a clinical guideline when determining dental implant diameter and position. And also, these measurements can also be useful during the production of prefabricated membranes and customized alveolar bone scaffolds.