• The KIPS Transactions:PartC
• /
• v.17C no.3
• /
• pp.281-290
• /
• 2010

In geographic forwarding algorithms, traditional route maintenance requires mobile nodes periodically exchange beacon messages with their neighbors. In beacon message based forwarding scheme, a longer interval reduces the number of beacons needed, but may result in significant location errors. Conversely, a shorter interval guarantees more accurate location information, but induces control overheads.Therefore, the fixed or dynamic interval scheme based forwarding schemes cannot adapt well to different mobility environments. Also, existing schemes result in the uncertainty of neighbor node's position in the forwarding table of mobile node. Therefore, this paper presents a self-adaptive location checking mechanism based proactive geo-routing algorithm for beacon-based geographic routing. Simulation results show that the proposed routing algorithm not only significantly increases the relay transmission rate but also guarantees the high end-to-end packet delivery in low and high mobility environments.

• Journal of KIISE
• /
• v.42 no.6
• /
• pp.807-816
• /
• 2015

The Internet of Things (IoT) has recently been showered with much attention worldwide. Various kinds of devices, communicating with each other in the IoT, demand multiple communication technologies to coexist. In this environment, mobile devices may utilize the vertical handover between different wireless radio interfaces such as Wi-Fi and Bluetooth, for efficient data transfer. In this paper, an IoT broker is implemented to support the vertical handover, which can also support and manage heterogeneous devices and communication interfaces. The handover is activated based on RSSI, Link Quality values, and real time traffic. The experimental results show that the proposed handover system substantially improves QoS in Bluetooth and reduces power consumption in mobile devices as compared with a system using only Wi-Fi.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.41 no.2
• /
• pp.53-65
• /
• 2016

Static wireless multi-hop networks, such as wireless mesh networks and wireless sensor networks have proliferated in recent years because of they are easy to deploy and have low installation cost. Two key measures are used to evaluate the performance of a multicast tree algorithm or protocol : end-to-end delay and the number of transmissions. End-to-end delay is the most important measure in terms of QoS because it affects the total throughput in wireless networks. Delay is similar to the hop count or path length from the source to each destination and is directly related to packet success ratio. In wireless networks, each node uses the air medium to transmit data, and thus, bandwidth consumption is related to the number of transmission nodes. A network has many transmitting nodes, which will cause many collisions and queues because of congestion. In this paper, we optimize two metrics through a guaranteed delay scheme. We provide an integer linear programming formulation to minimize the number of transmissions with a guaranteed hop count and preprocessing to solve the aforementioned problem. We extend this scheme not only with the guaranteed minimum hop count, but also with one or more guaranteed delay bounds to compromise two key metrics. We also provide an explanation of the proposed heuristic algorithm and show its performance and results.

• Journal of Advanced Navigation Technology
• /
• v.13 no.4
• /
• pp.490-502
• /
• 2009

This monograph details the development of communication UAV(Unmanned Aerial Vehicle) in combined modems of HSDPA with Wibro by using two kinds of mobile network. In order to apply mobile network which is currently serviced to a UAV, it is necessary to solve some problems : insurance of wide coverage based on the range of the UAV, electrical transmission of extensive image data for UAV for watching and scouting, security of stable communication environment is related to network traffic. This paper proposes those difficulties to be solved by application of correspondence system to mobile network. The proposed system consists of two parts; HSDPA part and Wibro part. The use of those can not only secure wide range of coverage but also transmit huge data. Furthermore, through utilizing them along with two kinds of mobile network, stable communication environment can be built up. All of these effects can be confirmed by experimentations and simulations.

• The Journal of the Korea Contents Association
• /
• v.16 no.11
• /
• pp.83-90
• /
• 2016

In this paper, we performed the analysis of transmission performance for Collision Free Period(CFP) supported by the low-power communication technology, IEEE 802.15.4 MAC (Media Access Control). For the analysis, periodic traffic, original service target of CFP, is considered and, according to the Quality of Service required, packet arrival pattern to MAC layer is categorized as batch and non-batch, and analysis on throughput, delay, and energy is performed for those patterns. On the basis of the obtained analysis, performance comparison with Collision Avoidance Period(CAP) is carried out for the health care applications that generate periodic traffic such as Pedometer, ECG, EMG. The evaluation confirms that CFP is more energy efficient for healthcare applications that generate periodic and time-critical traffic and moreover for the application with high bandwidth requirement CFP achieves up to 46% energy savings compared to CAP.

• Journal of Korea Multimedia Society
• /
• v.12 no.2
• /
• pp.257-271
• /
• 2009

In this paper, we propose a protocol compression scheme for enhancing the performance of call processing of PTT(Push-to-Talk) which is one of the important services in IMS(IP Multimedia Subsystem), a next generation integrated wired/wireless packet communication network. To service the PTT on an IMS network, it should use the same call setup procedure as legacy Mobile and TRS(Trunked Radio System) networks and have a fast call setup time and enough communication bandwidth because a number of terminals should be able to exchange same data in real time. The proposed A+SigComp scheme reduces the initial call setup delay of SIP by about 10%, which is used by PTT service for call setup. In addition, the A+ROHC scheme is proposed to compress the header of RTP packets transferred during PTT voice transmission and, as a result, about 5% of increase in communication efficiency is observed.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1059-1067
• /
• 2011

Next-Generation ITS environment requires high-speed data packet transmission, security, authentication, and hand-over supportable for driving vehicle on road by installing RSEs and OBUs. Therefore, wireless communication technology for next-generation ITS services are advancing to 200km/h maximum speed supportable, 1km communication radius, minimum 10Mbps hish-speed datarate for multimedia data(such as text, images, movie clips and so on) supportable, high reliability. In this paper, we implemented WAVE communication system which based on IEEE 802.11p PHY/MAC and evaluated that the system meets next-generation ITS environments.

• Journal of KIISE:Information Networking
• /
• v.31 no.5
• /
• pp.519-531
• /
• 2004

Ad-hoc networks are temporary wireless systems composed of mobile nodes without any fixed infrastructure. The life time of each node in the ad-hoc network significantly affects the life time of whole ad-hoc network. A node which drained out its battery may incur the partition of whole network in some network topology The life time of each node depends on the battery capacity of each node. Therefore if all mobile nodes in the network live evenly long, the life time of the network will be longer. In this paper, we propose Power-Aware Dynamic Source Routing (PADSR) which selects the best path to make the life time of the network be longer. In PADSR, when a source node finds a path to the destination node, it selects the best path that makes nodes in the network live evenly long. To find the best path, PADSR considers the consumption of transmission energy and residual battery capacity of nodes upon the path. Consequently the network lives longer if we use PADSR.

• Journal of KIISE:Information Networking
• /
• v.27 no.1
• /
• pp.76-87
• /
• 2000

ATM is a key technology of integration of multimedia service. Recently, Many study have been concentrated on performance testing for evaluation network performance are stronger everyday. The performance testing is on evaluation of maximal throughput of network by measuring and analyzing of various performance parameters. There are two ways to test ATM network performance; one is using QoS in cell level on the point of network's view, and the other is using metric in frame level in the point of user's view. And, the standardization process is also under way. In this paper, we derive a performance requirement of TCP in TCP/IP data transmission over ATM UBR service. By applying the derived requirements to ATM and packet networks, we evaluate the performance of TCP over UBR based on the result of our simulations. Therefore, we evaluate the result of simulation and find degradation of network throughput by interaction between TCP congestion control and ATM cell drop policy. So we suggest the accelerated Vegas that modify traditional TCP Vegas in congestion control mechanism for batter network throughput.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2387-2394
• /
• 2016

It is important to select the most appropriate channel for efficient transmission of massive data in wireless sensor network. In the fixed channel method for wireless sensor node, shortage of frequency may be a major constraint to support a variety of environments. In this paper, the method that seeks common channels between two nodes without common control channels in the existing wireless cognitive radio network is introduced in order to use efficiently the channel of wireless sensor network. The problem of existing method shows the severe degradation of performance that is caused by interference of linkage between selected channels, so that the sequential algorithm is suggested to improve the performance. From the results of computer simulation, the suggested method shows that the link can be set 50% faster than the other methods as the number of links increases because the beacon packet waiting time caused by the interference decreases remarkably.