• Water for future
• /
• v.28 no.2
• /
• pp.115-124
• /
• 1995

A GIS is capable of extracting various hydrological factors from DEM(digital elevation model). One of important tasks for hydrological analysis is the division of watershed. It can be an essential factor among various geometric characteristics of watershed. In this study, watershed itself and other geometric factors of watershed are extracted from DEM by using GIS technique. The manual process of tasks to obtain geometric characteristics of watershed is automated by using the functions of ARC/INFO software as GIS package. Scanned data was used for this study and it is converted to DEM data. Various forms of representation of spatial data are handled in main module and GRID module of ARC/INFO. GRID module is used on a stream in order to define watershed boundary, so it would be possible to obtain the watersheds. Also, a flow direction, stream networks and orders are generated. The results show that GIS can aid watershed management and research and surveillance. Also the geometric characteristics parameters of watershed can be quantified with ease using GIS technique and the hardsome process can be automated.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1511-1511
• /
• 2001

Energy content, expressed as calories per gram, is an important part of the evaluation and marketing of foods in developed countries. Currently accepted methods of measurement of energy by U.S. food labeling legislation include measurement of gross calories by bomb calorimetry with an adjustment for undigested protein and by calculation using specific factors for the energy values of protein, carbohydrate less the amount of insoluble dietary fiber, and total fat. The ability of NIRS to predict the energy value of diverse, processed and unprocessed cereal food products was investigated. NIR spectra of cereal products were obtained with an NIR Systems monochromator and the wavelength range used for analysis was 1104-2494 nm. Gross energy of the foods was measured by oxygen bomb calorimetry (Parr Manual No. 120) and expressed as calories per gram (CPGI, range 4.05-5.49 cal/g). Energy value was adjusted for undigested protein (CPG2, range 3.99-5.38 cal/g) and undigested protein and insoluble dietary fiber (CPG3, range 2.42-5.35 cal/g). Using a multivariate analysis software package (ISI International, Inc.) partial least squares models were developed for the prediction of energy content. The standard error of cross validation and multiple coefficient of determination for CPGI using modified partial least squares regression (n=127) was 0.060 cal/g and 0.95, respectively, and the standard error of performance, coefficient of determination, bias and slope using an independent validation set (n=59) were 0.057 cal/g, 0.98, -0.027 cal/g and 1.05 respectively. The PLS loading for factor 1 (Pearson correlation coefficient 0.92) had significant absorption peaks correlated to C-H stretch groups in lipid at 1722/1764 nm and 2304/2346 nm and O-H groups in carbohydrate at 1434 and 2076 nm. Thus the model appeared to be predominantly influenced by lipid and carbohydrate. Models for CPG2 and CPG3 showed similar trends with standard errors of performance, using the independent validation set, of 0.058 and 0.088 cal/g, respectively, and coefficients of determination of 0.96. Thus NIRS provides a rapid and efficient method of predicting energy content of diverse cereal foods.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1255-1255
• /
• 2001

The study used 356 veal calf meat samples received from Finland (n=16), France (n=109), Italy (n=81) and The Netherlands (n=150). Calves were raised under experimental protocols that compared feeding and housing practices normally used in each county to treatments aiming at improving animal welfare. Samples were taken at the $8^{th}$ rib of Longissimus thoracis muscle 24h after slaughter, They were kept refrigerated ( $2-4^{\circ}C$) under vacuum package for 6d and then frozen ($-20^{\circ}C$) until meat quality evaluation. Measurements included pH, color (Hunter Lab system), shear force, chemical composition (DM, Ash, Ether Extract, collagen and haematin content), weight and area cooking losses and a sensory evaluation by a group of panelists. A sample of meat was ground with a blade mill and scanned in duplicate between 1100 and 1498 nm (FOSS NIR Systems 5000). WinISI software was used to develop a discriminating equation using NIR spectra (SNV-detrend, derivative=1, gap=4nm, smooth=4nm). The Proc ANOVA and DISCRIM of SAS were used for all the laboratory determinations. County of production had a significant (P<0.01) effect on all the parameters. However, discriminant analysis using any or few laboratory parameters resulted in great errors of county classification. A more accurate (98.8%) classification was obtained only when using all the laboratory parameters. NIRS classified correctly 354 of the 356 samples (99.4%). Provided with a larger data set, NIRS could be used to identify country of production of veal meat.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.1
• /
• pp.70-78
• /
• 2011

At Haeundae Beach in Busan, people were swept away by the fast-moving rip current and rescued, on August 13th and 15th, 2009 & July 29th and 30th, 2010. In predicting the wave-induced current and consequent tube movement for public safety, the coastal flows and waves are calculated at each time step and grid point by means of systematic interfacing of hydrodynamic and wave models (Lee, 2001). To provide a user-friendly simulation tool for end-users, the forecasting system has been built in a software package called HAECUM. Outputs from the system are viewed as graphs of tube positions with combined current vectors for easy decision of emergency management officials. The tube-wave interaction is taken into account and the traces of swim tube are simulated by using a Lagrangian random walk (Chorin, 1978; Lee, 1994). In this study, we use the Lee's approach (Lee, 1993) in estimating the surface onshore currents due to wave breaking.

• International Journal of Highway Engineering
• /
• v.8 no.1 s.27
• /
• pp.139-152
• /
• 2006

Many experimental and numerical approaches have been developed to evaluate paving materials and to predict pavement response and distress. Micromechanical simulation modeling is a technology that can reduce the number of physical tests required in material formulation and design and that can provide more details, e.g., the internal stress and strain state, and energy evolution and dissipation in simulated specimens with realistic microstructural features. A clustered distinct element modeling (DEM) approach was implemented In the two-dimensional particle flow software package (PFC-2D) to study the complex behavior observed in asphalt mixture fracturing. The relationship between continuous and discontinuous material properties was defined based on the potential energy approach. The theoretical relationship was validated with the uniform axial compression and cantilever beam model using two-dimensional plane strain and plane stress models. A bilinear cohesive displacement-softening model was implemented as an intrinsic interface and applied for both homogeneous and heterogeneous fracture modeling in order to simulate behavior in the fracture process zone and to simulate crack propagation. A disk-shaped compact tension test (DC(T)) with heterogeneous microstructure was simulated and compared with the experimental fracture test results to study Mode I fracture. The realistic arbitrary crack propagation including crack deflection, microcracking, crack face sliding, crack branching, and crack tip blunting could be represented in the fracture models. This micromechanical modeling approach represents the early developmental stages towards a 'virtual asphalt laboratory,' where simulations of laboratory tests and eventually field response and distress predictions can be made to enhance our understanding of pavement distress mechanisms, such its thermal fracture, reflective cracking, and fatigue crack growth.

• Journal of the Korea Convergence Society
• /
• v.11 no.10
• /
• pp.31-36
• /
• 2020

Virtual simulation education, which is one of the methods of executing engineering education, is spreading. In general online education, only theoretical learning-centered lessons and practical training of simple small projects are conducted remotely, and it is necessary to disseminate various educational contents. Due to the spread of smart factories these days, most producers use automatic control to produce, inspect and package their products. The operation of automation equipment is controlled by using electricity, and electricity-related learning is operated in various departments. Due to the characteristics of electricity, it is difficult to learn online due to safety issues and high cost of practical equipment. In this paper, we provide a simulation-based electrical control panel distance learning model to improve the sense of accomplishment of education related to electrical training. Through the experiment of the proposed model, it was confirmed that the learning was more satisfied with the virtual simulation education than the online education using the existing equipment. It is expected that it can be used as a basic course for automation equipment education in the future.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.1
• /
• pp.49-56
• /
• 2014

In this study, the generation efficiency of the limited area of a concentrator solar cell was increased by using a solar concentrator and a tracking device. Heat generated by the solar cell was collected using a thermal absorber for supplying hot water or heating. Thus, the concentrator solar cell system provided electricity and heat simultaneously. Tracking of the sun by detecting the sun's position, repositioning of heating device towards the east after sunset, and shutting down of system after sunset were successfully implemented using an illuminance sensor (CdS) and Simulink, a commercial software package. We performed parametric analysis of the velocity, fin installation, and entrance location with respect to the operating temperature of the concentrator solar cell. A heat transfer simulation model was developed for comparing the actual temperature profiles of the concentrator solar cell and thermal absorber, and good agreement was found between the results of the simulations and the experiments.

• Journal of Korea Water Resources Association
• /
• v.39 no.6 s.167
• /
• pp.503-510
• /
• 2006

Riverbank filtration is a natural process, using alluvial aquifers to remove contaminants and pathogens in river water for the production of drinking water. Back analysis which minimizes the objective function that is typically the sum of squares of the differences between the calculated and measured quantities is used for the estimation of aquifer parameters. In this study, transmissivity is back-analysed using the BFGS (Broyden-Fletcher-Goldfarb-Shanno) scheme for optimization. MOC is used to obtain calculated groundwater level. The developed inverse model was applied to Dae-san, Chang-won city where riverbank filtration is being undertaken. The model showed good convergence behavior for different groundwater conditions. The performance of the model was better than a widely-used commercial software package in terms of error between calculated and observed groundwater level.

• The Journal of the Korea Contents Association
• /
• v.17 no.7
• /
• pp.622-633
• /
• 2017

The study was conducted to compare the factors affecting smoking quit attempts according to the amounts of smoking in adolescent smoker. The data were derived from the 12th Korea youth risk behavior web-based survey 2016 in Korea and analyzed using the IBM SPSS statistics version 21.0 software package considering complex samples analysis. The subjects were 4,012 adolescents smokers, Of these, 78.4% of the general smoker who smoke less than 10 cigarettes a day and 21.6% of the heavy smoker who smoke more than 10 cigarettes a day. As a logistic regression, vigorous physical activity, depression, smoking initiation time, friends smoking, smoking cessation education, and non-smoking promotion were associated with significantly smoking quit attempts in general smoker, vigorous physical activity, friends smoking, smoking cessation education, and non-smoking promotion were associated with significantly smoking quit attempts in heavy smoker. Based on the results, they were taken a baseline data for developing adapted smoking quit education program which were succeed effectively in adolescent smokers.

• Journal of the Korean Institute of Gas
• /
• v.16 no.4
• /
• pp.59-64
• /
• 2012

The dispersion of gas discharged from the vent pipes of pressure relief valves attached LPG (Liquefied Petroleum Gas) storage tank was studied. In general, vent pipes should be positioned so that they discharge vertically upwards in a safe place, and installed so that, in the event of ignition of discharged gas, flame impingement on any vessel, equipment or piping is avoided[1][2]. In Korea, on the other hand, there are various type of the end of vent pipes because there is no rule for discharge directions from the vent pipes. In this paper, we took 4 types of vent directions from the pipes in to account, such as vertically upward, vertically downward, vertically 4-way and horizontally 2-way direction. A software package, FLACS, was adopted to simulate gas dispersion from the vent pipes. We found that vertically downward, vertically 4-way and horizontally 2-way discharge from vent pipes were undesirable to avoid ignition on near ground. Therefore, it was obvious that vertically upward opening of a vent pipe is the best option to discharge in a safe place.