• 제목/요약/키워드: PZT센서

검색결과 194건 처리시간 0.03초

압전소자를 이용한 시멘트계 재료의 응결 특성 평가 (Setting Characteristic Assessment of Cementitious Materials using Piezoelectric Sensor)

  • 이창준;이준철;신성우;김화중
    • 한국건축시공학회지
    • /
    • 제16권5호
    • /
    • pp.389-395
    • /
    • 2016
  • 본 연구에서는 압전소자의 EMI 신호변화를 이용하여 시멘트계 재료의 응결특성을 평가하였다. 시멘트 페이스트에 매립된 PZT센서의 수화시간에 따른 EMI 신호변화를 비카트침 시험과 간이단열시험을 통한 수화온도곡선과 비교하였다. 실험결과, 시멘트 페이스트가 수화함에 따라 PZT센서의 EMI 공진피크와 공진주파수의 변화가 나타났으며, 이러한 변화시점은 비카트침 시험과 간이단열시험을 통한 수화온도곡선으로부터 획득한 응결시간과 부합하는 것으로 나타났다.

CFRP 판 보강 RC보의 균열 및 박리 손상 모니터링 (Crack and Debonding Donitoring of RC Beams Strengthened with CFRP Plates)

  • 윤준호;한정헌;조두용;박선규
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제15권4호
    • /
    • pp.185-192
    • /
    • 2011
  • CFRP 보강공법은 구조물에 내하력을 증가시키기 위해 사용되고 있는데 실제 교량에 적합하고 연구 활용성이 좋다. 하지만, CFRP로 보강된 콘크리트 보에서 휨파괴와 전단파괴 뿐만 아니라 부착파괴 또한 추가적으로 발생하게 된다. 이러한 CFRP 부착파괴는 취성파괴를 유발하게 된다. 따라서 이러한 CFRP로 보강된 콘크리트보 박리에 대한 모니터링은 매우 중요한 의미를 갖는다. 본 논문에서는 국부적인 손상 파악에 유리한 PZT센서를 이용한 임피던스 기반 손상검색 방법을 사용하여 CFRP로 보강된 콘크리트보에서 박리 모니터링에 대한 적용가능성을 검증해 보았다.

초음파 센서(수신기)용 PZT-PNN계 압전세라믹스에 $MnO_2$/ 첨가가 미치는 영향 (The effect of $MnO_2$ Addition to the PZT-PNN Piezoelectric Ceramics used in Ultrasonic Sensor (Receiver))

  • 조봉희;손은영;김현재;박창엽
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제1권4호
    • /
    • pp.311-318
    • /
    • 1988
  • 초음파센서(수신기)에 응용가능한 압전세라믹스를 제조하기 위하여 Ba변조된 Pb(ZR, Ti)O$_{3}$계 세라믹스에 MnO$_{2}$를 첨가하여 첨가량과 소성온도에 따른 영향을 조사하였다. 또한 제조된 압전세라믹스를 이용하여 초음파 수신기를 제작하여 수신특성을 확인하여 보았다. 그 겨로가 MnO$_{2}$가 0.4(wt%)첨가되었을 때 압전 g정수가 가장 크고 수신감도가 우수한 것으로 밝혀졌다.

  • PDF

Acoustic field simulation of a PZT4 disc projector using a coupled FE-BE method

  • 장순석
    • 센서학회지
    • /
    • 제8권3호
    • /
    • pp.211-218
    • /
    • 1999
  • This paper describes the application of a coupled finite element-boundary element method (FE-BEM) to obtain the steady-state response of a piezoelectric transducer. The particular structure considered is a PZT4 disc-typed projector. The projector is three-dimensionally simulated to transduce applied electric charge on axial surfaces of the piezoelectric disc to acoustic pressure in air or in water. The directivity pattern of the acoustic field formed from the projected sound pressure is also simulated. And the displacement of the disc caused by the externally applied electric charge is shown in temporal motion. The coupled FE-BE method is described in detail.

  • PDF

압전센서를 이용한 구조물 국부/광역 손상 진단 시스템 (Local/Global Structural Health Monitoring System Using Piezoelectric Sensors)

  • 김병수;권혁상;김진욱;노용래
    • 한국음향학회지
    • /
    • 제28권4호
    • /
    • pp.308-317
    • /
    • 2009
  • 본 논문에서는 오실레이터 센서와 램파 센서를 결합하여 구조물 손상 진단을 위한 통합된 압전 센서 시스템을 제안한다. 구조물 손상으로 인한 공진주파수 변화를 관측 할 수 있는 오실레이터 센서는 손상 정도에 민감하게 반응하고 구조가 단순한 장치이지만 측정 범위가 센서 주위로 제한되는 특성을 가진다. 반면에 램파를 이용한 진단 시스템은 원거리에 위치한 구조물의 손상부를 감지하기에 유용하다. 본 논문에서는 오실레이터 센서를 이용한 취약 지점의 국부적인 손상 진단 방식과 램파를 이용한 광역적인 손상 진단 방식을 결합하여 각 시스템의 장점들을 활용할 수 있는 센서 시스템의 적용가능성을 연구하였다. PZT소자를 알루미늄 판에 적용하여, 알루미늄 판의 손상 정도에 따른 오실레이터 공진주파수의 변화와 램파 신호의 Time of flight 그리고 진폭의 변화를 이용하여 크랙의 위치와 크기, 개수의 판별 가능성을 제시하고 실험을 통하여 그 타당성을 검증하였다.

자기센서용 Ni-PZT-Ni, Co, Fe 적층구조 소자의 ME 특성 (Magnetoelectric Characteristics on Layered Ni-PZT-Ni, Co, Fe Composites for Magnetic Field Sensor)

  • 류지구;전성즙
    • 한국전기전자재료학회논문지
    • /
    • 제28권2호
    • /
    • pp.92-98
    • /
    • 2015
  • The magnetoelectric characteristics on layered Ni-PZT-Ni, Co, Fe composites by epoxy bonding for magnetic field sensor were investigated in the low-frequency range. The ME coefficient of Ni-PZT-Ni, Ni-PZT-Co and Ni-PZT-Fe composites reaches a maximum of $200mV/cm{\cdot}Oe$ at $H_{dc}=110$ Oe, $106mV/cm{\cdot}Oe$ at $H_{dc}=90$ Oe and $87mV/cm{\cdot}Oe$ at $H_{dc}=160$ Oe, respectively. A trend of ME charateristics on Ni-PZT-Co, Ni-PZT-Fe composites was similar to that of Ni-PZT-Ni composites. The ME output voltage shows linearly proportional to ac field $H_{ac}$ and is about 0~150 mV at $H_{ac}$=0~7 Oe and f=110 Hz in the typical Ni-PZT-Ni sample. The frequency shift effect due to the load resistance $R_L$ shows that the frequency range for magnetic field sensor application can be modulated with appropriate load resistance $R_L$. This sample will allow for a low-magnetic ac field sensor in the low-frequency (near f=110 Hz).

Formaldehyde 측정을 위한 PZT 압전 바이오센서 개발 (Development of PZT Piezoelectric Biosensor for the Detection of Formaldehyde)

  • 김병옥;곽성곤;임동준
    • KSBB Journal
    • /
    • 제13권5호
    • /
    • pp.477-482
    • /
    • 1998
  • A biosensor with PZT piezoelectric ceramic crystal was developed for the detection of formaldehyde gas. Poled PZT piezoelectric ceramic disk was made from ZrO2, TiO2 and Nb2O5, together with the addition of PbO and polyvinyl alcohol, through various processes of mixing, calcination drying, crushing, forming, sintering, polishing, ion coating and poling. Oscillator circuit of sensor was made of operational amplifier(AD811AN). Formaldehyde dehydrogenase was immobilized onto a piezoelectic ceramic crystal, together with the cofactors, reduced glutathione and nicotinamide adenine dinucleotide. The effect of flow rate on the sensitivity was determined by varing the flow rate of carrier gas from 24.7mL/min to 111.7mL/min through detector cell. The results indicated that as the flow rate was increased, the recovery rate was increased. And a significant increase in the sensitivity was observed in enhanced flow rate of carrier gas. Frequency difference(ΔF) of immobilized PZT piezoelectic disk increased proportionally to the concentration gas and reproduced to repeated exposures of formaldehyde gas(28ppm, Δ68Hz).

  • PDF

RF-Magnetron Sputtering System을 이 용하여 제작한 mono-layer PZT박막과 Bi-layer PZT박막의 전기적 특성평가와 두께별 성분함량에 관한 연구

  • 정상묵;박영웅;이경우;임실묵
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2009년도 춘계학술대회 논문집
    • /
    • pp.196-196
    • /
    • 2009
  • $Pb_1(Zr_x,\;Ti_{1-x})O_3$ (PZT)는 강유전체 기억소자(FRAM)와 초고감도 압전센서 등 다방면의 활용성으로 인해 신뢰성 높은 박막을 제조하기 위한 많은 연구가 진행되고 있다. 본 연구에서는 RF-magnetron Sputtering System을 이용하여 mono-layer PZT박막과 Bi-layer PZT박막을 제조하여 각 sample의 전기적 특성을 비교 하였으며, 그 결과 Bi-layer PZT박막이 더 우수한 전기적 특성을 확인하였다.

  • PDF