• 한국응용과학기술학회지
• /
• 제20권2호
• /
• pp.101-109
• /
• 2003

Provitamin $B_5$ liquid crystal ($PVB_5$-LC) was the new emulsion system to enhance moisturizing activity on the skin. In this study, it should be mentioned that PVB5-LC could be prepared with the main compound of hydrogenated lecithin (HL) in oil-in water (O/W) emulsion. The key ingredient of humectants was contained 2% of provitamin $B_5$ ($PVB_5$) into the $PVB_5$-LC. The best suitable compositions of $PVB_5$-LC were made from 4.0 wt% of HL, 4.0 wt% of cetostearyl alcohol (CSA) as emulsifier and gelling agent, 3.0 wt% of 1,3-butylene glycol (1,3-BG) and 2.0 wt% of glycerin as moisturizers, 3.0 wt% of cyclomethicone (CMC), 3.0 wt% of isononanoate (ININ), 3.0 wt% of capric/caprylic triglyceride (CCTG), 3.0 wt% of macadamia nut oil (MNO) as emollients. As the analytical result of $PVB_5$-LC, it could know that the distribution range of particle size was 0.14 to 12.37 m level (mean size 3.24 m). It was certified the multi lamellar phase around the droplet of liquid crystal when observed the droplet particles through a polarization microscope. And it clinically was tested the effectiveness of moisturizing activity (in-vivo) compared with control sample (O/W emulsion). The effectiveness of moisturizing activity of $PVB_5$-LC with Skincon-200EX after 6 hours went up 49.0% (p<0.05, n=20) whereas the effectiveness of moisturizing activity of generally O/W emulsion cream was 25.7% (p<005, n=20). Also, in case of Comeometer CM-825, the moisturizing activity of $PVB_5$-LC after 6 hours rose 36.6% (p<0.05, n=20) whereas the effectiveness of moisturizing activity of generally O/W emulsion cream was 10.8%. Therefore, it was known that the effectiveness moisturizing activity of $PVB_5$-LC with HL was remarkably superior compared with O/W emulsion cream.

• Bulletin of the Korean Chemical Society
• /
• 제28권4호
• /
• pp.662-666
• /
• 2007

Poly(vinyl butyral) (PVB) with different wt% water was studied gravimetrically as well as with 1H magic angle spinning (MAS) nuclear magnetic resonance (NMR). The composition of PVB samples changes during MAS NMR because of the centrifugal force. As MAS time progresses, initially free water was removed fast but bound water also was gradually depleted. More water was diminished at faster spinning speeds, longer spinning time, higher temperatures, and higher initial water contents. As water in PVB was reduced, the chemical shifts and line widths of different types of water and also those of PVB changed. Our results demonstrate that 1H MAS NMR carried out at 10 kHz in less than about 5 minutes is a convenient and sensitive technique to measure: (a) the content variations of different types of water in polymers, (b) the degree of the interaction of water and polymer, and (c) the molecular dynamics of the polymer. Our study can be extended to different soft polymers with other small molecules than water in them.

• 한국철도학회논문집
• /
• 제19권1호
• /
• pp.1-10
• /
• 2016

본 논문은 고속열차 객실 내 유리창의 차음 성능을 향상시키기 위한 기반연구로, 접합유리에 사용되는 고분자 필름의 물성과 음향학적 특성을 분석하여 그 상관관계를 살펴보고자 하였다. 기존에 사용되고 있는 PVB(polyvinyl butyal) 필름 및 다른 단량체 비율을 가지는 PVB 유도체, 그리고 유리 사이 차음재로 사용가능 한 PC(polycarbonate)의 동적기계적 특성을 분석(DMA)하였다. DMA 분석을 통해 상온에 가까운 온도범위에서 유리전이온도($T_g$)를 가지며 tan ${\delta}$(loss tangent) 값이 큰 것으로 나타난 PVB-HEMU 시편의 댐핑(damping) 성능이 가장 우수할 것으로 예측하고, 이를 고속철도 차량의 접합유리창과 동일한 구조에서의 투과손실 시험과 해석을 통해 검증하고자 하였다. 접합필름의 종류에 따른 유리창 투과손실 값을 투과손실 측정(인텐시티법)과 FE 해석을 이용해 도출하고, 고분자 필름의 물성과 음향성능 간 상관관계 분석을 위한 기초자료를 구축하였다.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 춘계총회 및 연구발표회 초록집
• /
• pp.78.1-78
• /
• 2003

• 자원리싸이클링
• /
• 제17권3호
• /
• pp.21-28
• /
• 2008

자동차 부품으로 사용되는 air filter media인 PET와 frame으로 사용되는 PP의 혼합폐플라스틱의 제조공정의 edge scrap 및 부품의 교체로 발생된 post-consumer waste에 대한 재활용 연구를 진행하였다. 수거된 혼합 폐플라스틱을 파쇄 및 건조시킨 후 세 가지 형태의 상용화제의 배합비 별로 압출기를 이용한 용융 블렌딩을 실시하여 재생 칩을 제조하였다. 사용된 상용화제는 EVA, MBS, 그리고 가소화 재생 PVB이고, 이들의 배합비는 $3{\sim}10wt.%$까지 혼합하였다. 상용화제의 종류와 배합비의 변화에 따른 기계적 특성과 열적 특성을 비교하였다. 이들 상용화제 종류별 분석에서는 MBS 상용화제가 가장 뛰어난 기계적 특성을 좌였고, 배합비는 $3{\sim}5wt.%$에서 우수한 특성 값들을 보였다. 또한 EVA를 상용화제로 사용한 경우 배합비가 $3{\sim}5wt.%$에서 내충격성 및 열적 특성의 향상을 보여 내충격성이 요구되는 재활용 제품으로의 응용이 기대된다. 재생 PVB수지를 상용화제로 사용한 경우는 전체적으로 특성치의 저하를 보이기는 하나 toughening effect가 요구되는 분야로의 응용이 기대된다.

• 한국세라믹학회지
• /
• 제51권1호
• /
• pp.32-36
• /
• 2014

The effects of an amphiphilic agent and the orientation of BN on the microwave dielectric properties of BN / polyvinyl butyral (PVB) composites were investigated as a function of the BN content in volume fractions from 0.1 to 0.5 ($V_f$). The plate-shaped BN samples were oriented in the PVB matrix by physical processes, in this case tape casting and laminate methods. With an increase in the BN content, the dielectric constant (K) increased because the K of BN was higher than that of the PVB. At the same BN content, composites with an in-plane orientation of the BN showed a higher dielectric constant than that of composites with a transverse orientation of the BN because the ceramics were oriented parallel to the electric field. All of the composites showed nearly constant K values ranging from 1 to 9.4 GHz, indicating good frequency stability over a wide frequency range. At the same frequency, the K values of the composites increased with an increase in the BN content.

• 한국표면공학회지
• /
• 제28권1호
• /
• pp.46-54
• /
• 1995

An electrochromic(EC) cell was constructed using $WO_3$ as a electrochromic material and NiO as a counter electrode, deposited onto ITO-coated glass by the implementation of electron beam evaporation. The electrolytic media were both lithium and proton conducting polymers such as poly-acrylonitrile(PAN)-$LiClO_4$, poly-ethylene oxide(PEO)-$LiClO_4$, poly-vinyl butyral(PVB)-LiCl and PVB-H$_3$$PO_4$. Potentiodynamic cycling of the cells using PAN-$LiClO_4$, or PVB-$H_3$$PO_4$ electrolyte yielded a transmission variation of more than 40% at the wavelength of 632.8 nm within less than 10 sec response time at room temperature. These results indicate that these electrolytes, transparent in gel type, are premising for the application in large area electrochromic windows.

• Structural Engineering and Mechanics
• /
• 제52권3호
• /
• pp.603-612
• /
• 2014

A series of experimental work is carried out with the aim to understand the flexural performance of laminated glass (LG) beams using polyvinyl butyral (PVB) and Ionoplast interlayers subjected to short term duration loads in the circumstance of elevated temperature. The study is based on a total of 42 laboratory tests conducted in ambient temperature ranging from $25^{\circ}C$ to $80^{\circ}C$. The load duration is kept within 20 seconds. Through the tests, load-stress and load-deflection curves of the LG are established; appropriate analytical models for the LG are indentified; the effective thicknesses as well as the shear transfer coefficients of the LG are semi-empirically determined. The test results show that within the studied temperature range the bending stresses and deflections at mid-span of the LG develop linearly with respect to the applied loads. From $25^{\circ}C$ to $80^{\circ}C$ the flexural behavior of the PVB LG is found constantly between that of monolithic glass and layered glass having the same nominal thickness; the flexural behavior of the Ionoplast LG is equivalent to monolithic glass of the same nominal thickness until the temperature elevates up to $50^{\circ}C$. The test results reveal that in calculating the effective thicknesses of the PVB and Ionoplast LG, neglecting the shear capacities of the interlayers is uneconomic even when the ambient temperature is as high as $80^{\circ}C$. In the particular case of this study, the shear transfer coefficient of the PVB interlayer is found in a range from 0.62 to 0.14 while that of the Ionoplast interlayer is found in a range from 1.00 to 0.56 when the ambient temperature varies from $25^{\circ}C$ to $80^{\circ}C$.

• 마이크로전자및패키징학회지
• /
• 제29권1호
• /
• pp.43-47
• /
• 2022

본 연구에서는 보일러 등에 적용을 하기 위하여 물속에 담군 채 가열할 수 있는 친환경 박막형 히터에 대한 결과를 보고한다. 장수명을 확보하기 위하여 소재 안정성이 높은 Mo 박막(40 nm)을 마그네트론 스퍼터법을 이용하여 Glass 기판상에 증착하였으며 후속 공정 진행 시 Mo 박막의 부식을 방지하기 위하여 상부에 ZnO 박막 (60 nm)을 형성하였다. 이후 투명 접착성을 가지는 PVB (Polyvinyl Butyral)를 이용하여 ZnO 박막 상부에 또 다른 Glass기판을 올려두고 열풍건조기 내에서 150℃의 온도에서 2시간동안 PVB를 경화시키며 접착시켜 Glass/Mo/ZnO/Glass 구조의 수중 히터를 완성하였다. 이렇게 제작한 발열체를 수중에 담근 후 발열 시 물의 온도가 2분 내 50℃까지 상승되는 것을 확인하였으며 미미한 수준의 저항증가가 발생하며 구조적 안정성 또한 확보되었다. 인가 전압의 세기에 따라 발열체의 온도가 제어되기 때문에 보일러에 적용할 때 사용자가 설정하는 온도를 용이하게 제어할 수 있을 것이라 기대된다. 마지막으로, 본 연구에서 제작한 박막형 히터는 반투명의 특성을 가져 심미성을 부여할 수 있어 제품의 부가가치를 더욱 높일 수 있을 것으로 기대된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1320-1321
• /
• 2011

According to the advance that solar power plants go into the desert, power plants are getting greater capacity. The desert is unspoiled resources and it is well suited to build a solar power plant, because of abundant solar radiation and long sunshine duration. but existing PV modules have several weaknesses and don't generate lower the rated power, because it wasn't designed to produce in extreme environments like a desert climate. The one of the weaknesses of PV modules is that the characteristics of the temperature of the Encapsulants(EVA sheet) are not good in a desert climate, because the EVA sheet is melt at high temperature. In this study, a decrease phenomenon of the transmittance depending on the melting point of the Encapsulant(PV module using EVA sheet : $75^{\circ}C$ PV module using PVB film : $110^{\circ}C$) is suggested, it would be the one of the important factors to achieve rated output of the PV modules in high temperature climate regions.