• Korean Chemical Engineering Research
• /
• v.51 no.1
• /
• pp.116-120
• /
• 2013

Characteristics of photocatalytic CO removal process conducting CO conversion by using Pt loaded $TiO_2$ photocatalyst were investigated in a photocatalytic tubular reactor. Effects of Pt loading method onto $TiO_2$, linear velocity of gas stream containing CO gas, CO concentration and moisture content in the gas stream on the conversion of CO to $CO_2$ were examined. It was found that the CO gas could be removed almost 100% by using photocatalytic tubular reactor internally coated with Pt/$TiO_2$ photocatalyst under UV irradiation, when the linear velocity of gas stream was in the range of 0.01~0.25 m/s and CO concentration in the gas stream was ranged from 20 to 100 ppm and the relative humidity of the gas stream was in the range of 20~40%. The conversion of CO gas decreased gradually with increasing linear velocity of gas stream and CO concentration in the gas stream. The moisture in the gas stream could promote the removal of CO gas by means of the generation of OHradicals.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.482-488
• /
• 2001

Platinum group metals (pgm) are useful to many industries such as chemical, dental and medical, petroleum, refining, electrical and electronic, and automotive. Researchers at the South Dakota School of Mines and Technology and PGM Recovery Ltd. have developed jointly an environmentally sound and metallurgically efficient process for extracting these metals from secondary sources. Once these metals have been dissolved in the leach liquor, the individual metals mainly platinum, palladium, and rhodium, should be separated in order to recover the individual metals with high purity. During this investigation, solvent extraction has been chosen as the method used to achieve the separation and extraction of platinum, palladium, and rhodium from the leach liquor. There were three solutions used throughout this procedure: 1) Synthetic solution (200 ppm Pt 80 ppm Pd 20 ppm Rh; 300 ppm Pt, 180 ppm Pd 50 ppm Rh), and 2) Auto catalyst leach liquors (100 ppm Pt, 30 ppm Pd, 20 ppm Rh). The solvents investigated included Lix 84(2-hydroxy-5-nonylacetonphenone oxime in a mixture with 5-dodecylsalicyloxime), Lix 84-I, ACORGA CLX-50 (diester of pyridine 3,5 dicarboxylic acid), and di-hexyl sulfide. The extraction values achieved using ACORGA CLX-50, Lix 84, and Lix 84-I were respectively Pt (25%, 0% 0%), Pd (100%, 99.8%, 95.3%), and Rh (99.1%, 35.5%, 4.25%). The stripping processes for the Lix 84, and Lix 84-I were proven to be more involved than others. The solutions were required to be simultaneously heated and stirred. The percentages acquired through these processes yielded unsatisfactory results. The stripping procedure for the ACORGA CLX-50 was easier to execute, yet the percentage recovered from this process was also unsatisfactory. Overall the di-hexyl sulfide has proved to be the most successful organic for this procedure. The average percent extracted for palladium was excellent with 99.9% - 100% with very little Platinum and rhodium extracted. The ability of stripping palladium in ammonia solution was also found to be excellent.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.118-122
• /
• 1996

1wt% Pt/MoO$_3$ gas sensors for detecting H$_2$ gas were fabricated by the pressed pellet method and surface structures of Pt/MoO$_2$ were investigated by TEM and XRD. It was observed that as the calcination temperature is increased, the overlayers of MoO$_3$ on Pt are produced, but the Cl content in PtCl$\_$x/ are decreased. H$_2$ gas sensing properties in N$_2$ ambient and in air ambient were investigated, respectively, and Pt/MoO$_3$ had high sensitivity at low working temp ; 7.8% at 50$^{\circ}C$, 97.7% at 100$^{\circ}C$, 97.1% at 150$^{\circ}C$ when the specimens are treated at 400$^{\circ}C$, and 99.6% at 150$^{\circ}C$ when they are treated at 200$^{\circ}C$. It shows the development of a low-power type sensor is possible by using Pt/MoO$_3$.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.1
• /
• pp.120-124
• /
• 2010

Monometallic, bimetallic and trimetallic particles consisting of different weight compositions of Pt-Pd-Rh over pure alumina wash coats have been synthesized and their catalytic performance on methane conversion was studied from 150 to $600^{\circ}C$. Different catalyst formulations with variable Pt, Pd and Rh contents for bimetallic and trimetallic systems were tried and $Pt_{(1.5)}Rh_{(0.3)}/Al_2O_3$ and $Pt_{(1.0)}Pd_{(1.0)}Rh_{(0.3)}/Al_2O_3$ shows low $T_{50}$ and $T_{90}$ temperatures. Bimetallic and trimetallic particle synergism acts as three way catalysts and therefore, all the catalysts show 100% methane conversion. The effect of supports such as $ZrO_2$ and $TiO_2$ on methane combustion was investigated; from $T_{50}$ and $T_{90}$ results both $Al_2O_3$ and $ZrO_2$ are suitable supports for low temperature methane combustion.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2008.10a
• /
• pp.57-59
• /
• 2008

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.1
• /
• pp.51-57
• /
• 1999

This thesis is written about the Wired Logic Type Unit in developing equipment that the load is driven, that the interface unit connect with 1 Scan time to PO30 of operated PLC output contact with that a sensing signal of Temperature Sensor RSD Pt $100\Omega$ let generate the relay output of temperature controller and input the PLC. The PLC Test Kit in country that the PLC to be programmed at the PLC education place is able to drive the load, is done to do a education of PLC on status that interface process between PLC and load are disregarded. As Developing Kit for supplement this point, when the relay output of temperature controller to use Pt 100 of temperature sensor as mentioned on the former among every kinds of sensor feed back to the input of the PLC, as the equipment to act with real time system that the output contact of PLC operated to insert the WLTIJ among PC, PLC and the load, it can understand and see very easy the main principle of PLC use. The structure of WLTU to be a interface unit of load separated as to the point of contact and noncontact, sensor, indicating lamp and A contact and B contact that is belong to driving part, and a motor is belong to loading part.

• Journal of Environmental Science International
• /
• v.28 no.7
• /
• pp.639-643
• /
• 2019

We aimed to evaluate antithrombotic efficacy of Protaetia brevitarsis extract during 21 days. Rats (SPF rat, weight 240~260 g) were divided into 16 groups (5 rats per group), they were: control group and Protaetia brevitarsis extract groups with dose of 0.1, 0.5, 1, 2.5, 5, 10, 25, 50, 75, 100, 200, 250, 500, 750, 1,000 mg/kg kg of body weight. Thromboplastin time (PT) and activated partial thromboplastin time (aPPT) as antithrombotic efficacy were tested in this animal experiment (at 7, 14 and 21 days). Overall, the admistration dose of Protaetia brevitarsis extract over 50 mg/kg at 7, 14 and 21 days for PT and over 25 mg/kg at 7, 14 and 21 days for aPPT tented to be longer than that of other groups. In addition, the optimal admistration doses of Protaetia brevitarsis extract to improves antithrombotic efficacy were 75, 100, 200 and 250 mg/kg at 7, 14 and 21 days for PT (p<0.05) and 50 and 100 mg/kg at 7 days, 75 mg/kg at 14 days, or 50, 100, 200 and 250 mg/kg at 21 days for aPPT (p<0.05). It can be concluded that Protaetia brevitarsis extract at optimal levels have antithrombotic efficacy.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.9-11
• /
• 2001

차세대 고속 DRAM기술에 사용될 금속인 Cu의 확산 방지막(diffusion harrier) 물질로는 Ta 또는 W 같은 Refractory metal 이 융점(melting point)이 높고 저항값이 낮아 많이 연구 보고되고 있으나, 본 논문에서는 초고주파 소자에서 Au의 확산 방지 막으로 많이 사용되고 있으며. 선택적 증착이 용이한 Pt과 Ni를 MOS 소자의 Cu 확산 방지 막으로 적용하며 어닐링한 후 소자의 게이트 산화막 누설전류($I_{leak}$), 그리고. Si/$SiO_2$ 계면의 trap density 등의 변이를 측정하여 Cu가 소자의 특성 열화에 미치는 영향을 연구하였다. 실험 결과 Pt/Ti($200{\AA}/100{\AA}$)를 적용한 경우 소자 측성 열화가 가장 적었으며. 이는 Copper의 확산 방지막으로 Pt/Ti를 사용하여 전기적 특성 및 계면 특성을 개선시킬 수 있음을 보여 주었다. 이는 SIMS Profile을 통해서도 확인하였다.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.292-295
• /
• 1999

We investigated the effects of Pd impurities on cube-textures in cold rolled and recrystallized PtPd tapes The sample were made from Pt$_{1-x}Pd_x$ alloys (x from 0 to0.34) by rolling at low temperature. The thickness of the tapes were about 100 ${\mu}$m. The PtPd[111] pole figures of X-ray Diffraction for all the samples indicated similar deformed textures. But the recrystallized textures after annealing showed that a better cube texture was formed in the sample of larger x. The final textures were sensitive to annealing time and temperature when x was increased.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.5
• /
• pp.410-416
• /
• 2001

KLN thin films were fabricated on Pt coated Si(100) wafer using an rf-magnetron sputtering method. The grown KLN thin film consists of 4-fold grains. In this experiment, the structure of 4-fold grained thin film was investigated using XRD and SEM measurements. Pt layer was also deposited using the rf-magnetron sputtering method,. XRD measurement showed that he Pt thin film has Gaussian distribution form with strong (111) direction orientation. The KLN thin film has preferred-orientation of (001) direction, and the peak consists of 2 separate peaks; one with broad FWHM and the other with narrow FWHM. The sharp peak is due to single crystal, and combining with Em results, the 4-fold grain consists of singel crystals with c-axis normal to substrate.