• Journal of Venture Innovation
• /
• v.2 no.2
• /
• pp.79-94
• /
• 2019

The purpose of this study is to explore the factors affecting rural experience by applying the unified push-pull-mooring model. The theoretical model is an unified PPM model that introduces new variables based on PPM. The pull factor of the newly introduced variables were reconstructed based on the Schmitt's Experience model and ServQual model. The hypothesis is set as follows. The push factor will have a negative effect on experience satisfaction and the pull factor(experience attributes, service quality)will have a positive effect on experience satisfaction. Also, mooring factors will have a negative effect on experience satisfaction. The research model of this study was tested by structural equation model based on 314 effective questionnaire data. Service quality had a positive effect on experience satisfaction. Mooring factors have a negative effect on experience satisfaction. Push factor and experience attributes factor were analyzed to have a no significance effect on experience satisfaction. These results theoretically test that the mooring factors also have an important effect on the experience satisfaction in the rural experience. Based on the Schmitt's Experience model and ServQual model introduced as a pull factor, the proposed unified PPM model proved to be a useful analysis framework. In practice, it was able to provide implications on what factors should be strategically and marketingly focused to activate the 6th industry experience.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.6
• /
• pp.607-616
• /
• 2012

The need for management of tunnel air quality is imminent considering the rapid increase of number and span of tunnels in Korea. To investigate spatial distribution of $CO_2$ within tunnels, $CO_2$ were measured and model simulations were performed in Namsan 1 tunnel. Results show that $CO_2$ concentrations were 250 ppm to 400 ppm higher in the exit than tunnel entrance. Also, $CO_2$ concentrations were 200 ppm to 300 ppm lower inside no ventilating vehicle than in the tunnel. Both experimental and model simulation results show that spatial distribution and concentration gradient of air pollutant inside tunnel are highly dependent on traffic density.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.5
• /
• pp.85-90
• /
• 2011

The effects of $CO_2$ ppm in atmosphere on the values of the total emissivity are studied. The predictions by several methods are compared. The predicted value differences between modified Kondratyev model and Hottel model are the smallest with in the range of values tested. The $CO_2$ ppm is varied from 300 ppm to 600 ppm. By Wide Band model, the total emissivity increases with increasing density-path length product rather linearly up to 0.1 g/$cm^2$. For given $CO_2$ ppm, the total emissivity increases as the air thickness increases. The same is true for both temperature and pressure increase. The temperature range tested is 220 to 300 K. Around 260K, the total emissivity is less sensitive with increasing temperature than with decreasing temperature. The pressure is varied from 0.94 to 1.06 atm. The percentage change of total emissivity with pressure change from 1atm is at most the percentage change of the pressure.

• Analytical Science and Technology
• /
• v.10 no.1
• /
• pp.66-74
• /
• 1997

Influence of the axial dispersion on immobilized enzyme catalytic bed was investigated in order to examine the kinetic behavior of the biocatalysis. The enzyme employed in this study was the tyrosinase(EC 1.14.18.1) immobilized on carbon support : this system requires two substrates of phenol and oxygen. This enzyme has potential application for phenol degradation in waste water. A simulated reactor was a packed-bed reactor of 2.54cm in diameter and 10cm long, loaded with the immobilized carbon particle with an average diameter of $550{\mu}m$. A phenol feed in the strength of 55.5mM(5220ppm) was used to observe the behavior of the immobilized enzyme column at three different dissolved oxygen levels of 0.08445mM(2.7ppm), 0.1689mM(5.4ppm) and 0.3378mM(9.5ppm) with the flow rates in the range of 60(1mL/s) to 180mL/min(3mL/s). Examination of the Biot number and Damkolher numbers of the immobilized system enables us to eliminate the contribution of external mass transfer to set of differential equations derived from the dispersion model. Solution of the equation was finally obtained numerically with the application of the Danckwert boundary conditions and the assumed zero-and first order rates on the non-linear two substrate enzyme kinetics. Higher conversion of phenol was observed at the low flow rates and at the higher oxygen concentration. Comparison of axial dispersion and plug flow model showed that no detectable difference was observed in the column outlet conversion between the axial and the plug flow models which was in complete agreement with the previous studies.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.28 no.4
• /
• pp.102-108
• /
• 2005

Single PPM Quality Innovation Movement is originally developed quality program in Korea for supplier's quality level-up since 1995. The quality target is below the 10ppm(parts per million) in outgoing quality and delivered goods plus field claim. Recently 1,053 companies is received Single PPM Quality Certification from government. This quality program is to realized the anticipated results not only duality level's increasing, but also company's confidence, competitiveness. We were able to obtain participations of 75 questionnaire, and derived statistics by means of SPSS/PC version 10.0. In this study, we find the bottleneck factor for promotion and upgrade S-PPM, and suggest a way out of difficulties.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.6
• /
• pp.259-266
• /
• 2023

It is very difficult to measure the performance of the machine learning model in the business service stage. Therefore, managing the performance of the model through the operational department is not done effectively. Academically, various studies have been conducted on the concept drift detection method to determine whether the model status is appropriate. The operational department wants to know quantitatively the performance of the operating model, but concept drift can only detect the state of the model in relation to the data, it cannot estimate the quantitative performance of the model. In this study, we propose a performance prediction model (PPM) that quantitatively estimates precision through the statistics of concept drift. The proposed model induces artificial drift in the sampling data extracted from the training data, measures the precision of the sampling data, creates a dataset of drift and precision, and learns it. Then, the difference between the actual precision and the predicted precision is compared through the test data to correct the error of the performance prediction model. The proposed PPM was applied to two models, a loan underwriting model and a credit card fraud detection model that can be used in real business. It was confirmed that the precision was effectively predicted.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.4
• /
• pp.209-219
• /
• 2007

Since 100PPM Quality Certification System has been established by the Industrial Advancement Administration in 1995, 100PPM duality Innovation movement has contributed much to the enhancement of qualify competitiveness of Korea's parts industry. And in 2000, raised to a higher level, Single PPM qualify Certification System has been established by the Small and Medium Business Adminstration. The quality target is below the 10ppm(parts per million) in outgoing qualify and delivered goods plus field claim. Recently 1.818 companies is received Single PPM Quality Certification from Government. Single PPM Quality Innovation movement is perfection movement which is suitable for 21C's social-economical criteria to pursuit of zero defect. The purpose of this study is to suggest the Kano Model based Global Sustainable duality Innovation(GSQI) Index to improve current problems of Single PPM Quality Innovation Movement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.1
• /
• pp.41-48
• /
• 2004

In this paper, we analyzed channel performance of PPM modulated UWB communication system in indoor radio fading environment that consider amplitude characteristic of channel. Fading channel considered various channel environments by fading index m utilizing Nakagami-m distribution model with data through an UBW radio signal experiment that announced in existing. Also, we improved performance of system that it is decreased in fading environment employing convolution encoding techniques.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.12-19
• /
• 2014

In this paper, an advanced UWB (ultra wideband) Rake receiving technique based on the statistical distribution model is studied in the M-ary TH-PPM system with multiple access interference (MAI). In order to improve the performance of the Rake receiver, the stochastic model, which can flexibly express the behavior of MAI-plus-noise, is required and the Laplace distribution and the generalized normal Laplace (GNL) model applied by the curtosis matching method are considered. The performance of Rake receiver based on each probability distribution is evaluated in the IEEE multipath fading channel and compared to that of the conventional Rake receiver. The suggested approach shows a superior BER performance than that of conventional Rake receiver.

• Korean Journal of Food Science and Technology
• /
• v.21 no.4
• /
• pp.590-594
• /
• 1989

To determine the change of residual chlorpyrifos during Kimchi fermentation, the Kimchi was prepared and fermented at $4^{\circ}C$ for 4 weeks according to the conventional method. As a model experiment, chinese cabbages which were soaked in the chlorpyrifos solution were used for Kimchi preparation. It was found that the concentration of residual chlorpyrifos which was 0.161 ppm in raw cabbages decreased to 0.0938 ppm by 4 times of washing and further decreased to 0.0099ppm during fermentation of Kimchi for 4 weeks. In the model system, the residual chlorpyrifos decreased by the first order reaction as the fermentation of Kimchi proceeded . It's half life is approximately 1.8 weeks.