• Journal of electromagnetic engineering and science
• /
• v.14 no.1
• /
• pp.1-8
• /
• 2014

A differential-cascode CMOS power amplifier (PA) with a supply modulator for envelope tracking (ET) has been implemented by 0.18 ${\mu}m$ RF CMOS technology. The loss at the output is minimized by implementing the output transformer on a FR-4 printed circuit board (PCB). The CMOS PA utilizes the $2^{nd}$ harmonic short at the input to enhance the linearity. The measurement was done by the 10MHz bandwidth 16QAM 6.88 dB peak-to-average power ratio long-term evolution (LTE) signal at 1.85 GHz. The ET operation of the CMOS PA with the supply modulator enhances the power-added efficiency (PAE) by 2.5, to 10% over the stand-alone CMOS PA for the LTE signal. The ET PA achieves a PAE of 36.5% and an $ACLR_{E-UTRA}$ of -32.7 dBc at an average output power of 27 dBm.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.12
• /
• pp.1173-1177
• /
• 2015

This paper deals with estimating the acid concentration of pickling process using the Volterra inputs. To estimate the acid concentration, the whole pickling process is represented by the grey box model consists of the white box dealing with known system and the black box dealing with unknown system. Because there is a possibility of nonlinear term in the unknown system, the Volterra series are used to estimate the acid concentration. For the white box modeling, the acid tank solution level and concentration equations are used, and for the black box modeling, the acid concentration is estimated using the Volterra Least Mean Squares (LMS) algorithm and Least Squares (LS) algorithm. The LMS algorithm has the advantage of the simple structure and the low computation, and the LS algorithm has the advantage of lowest error. The simulation results compared to the measured data are included.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.5
• /
• pp.579-587
• /
• 2014

This paper presents a variable gain amplifier (VGA) for an analog front-end (AFE) of ultrasound medical imaging. This VGA has a closed-loop topology and shows a 37-dB-linear characteristic with a single-stage amplifier. It consists of an op-amp, a non-binary-weighted capacitor array, and a gain-control block. This non-binary-weighted capacitor array reduces the required number of capacitors and the complexity of the gain-control block. The VGA has been fabricated in a 0.35-mm CMOS process. This work gives the largest gain range of 37 dB per stage, the largest P1 dB of 9.5 dBm at the 3.3-V among the recent VGA circuits available in the literature. The voltage gain is controlled in the range of [-10, 27] dB in a linear-in-dB scale with 16 steps by a 4-bit digital code. The VGA has a bandpass characteristic with a passband of [20 kHz, 8 MHz].

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.271-272
• /
• 2016

본 논문에서는 ESS 구성을 위한 고효율 3-레벨 양방향 인버터를 제안한다. 제안된 인버터는 저주파 레그와 고주파 레그로 구성되어, dc-link 전압과 계통간의 양방향 전력 변환을 수행한다. 제안된 인버터는 3-레벨의 전압을 제공하며 기존 풀브리지 타입의 2-레벨 인버터에 비해 고조파 성분이 적고 필터의 크기를 줄일 수 있다. 또한, 소자들에 걸리는 전압 스트레스가 낮고 동작 중에 스위칭 소자의 바디 다이오드를 사용하지 않기 때문에 도통 손실과 스위칭 손실을 최소화 할 수 있다. 따라서 제안하는 양방향 인버터는 기존 2-레벨 인버터 대비 높은 계통 전류 품질과 높은 효율을 제공한다. 최종적으로 시제품을 제작하여 제안하는 양방향 인버터의 타당성을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2249-2251
• /
• 1997

Total 144 quadrupole magnets are installed in PLS. The magnets are connected in series with groups of two or 24. Each group is powered by a high-precision constant-current DC power supply. For the purpose of the beam based alignment of beam position monitors in the PLS, it is necessary to adjust the current of each quadrupole independently. To achieve this, a high current shunt regulator is designed. It can shunt a maximum 50 A of the quadrupole magnet current. The shunt regulator is programmable and the current amplitude can be varied linearly with a 12-bit resolution. Power transistors are used in the current shunt regulator. The operation of transistors is in linear region. The RS232C protocol is used for remote control and status report of the shunt regulator to the main control centre of the PLS. Preliminary result indicates that the calibration accuracy of the beam position monitor can be achievable in less than $10{\mu}m$.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2003.10a
• /
• pp.86-94
• /
• 2003

Electronically available biological literature has been accumulated exponentially in the course of time. So, researches on automatically acquiring knowledge from these tremendous data by text mining technology become more and more prosperous. However, most of the previous researches are technology oriented and are not well focused in practical extraction target, hence result in low performance and inconvenience for the bio-researchers to actually use. In this paper, we propose a more biology oriented target domain specific text mining system, that is, POSTECH bio-text mining system (POSBIOTM), for signal transduction pathway extraction, especially for G protein-coupled receptor (GPCR) pathway. To reflect more domain knowledge, we specify the concrete target for pathway extraction and define the minimal pathway domain ontology. Under this conceptual model, POSBIOTM extracts interactions and entities of pathways from the full biological articles using a machine learning oriented extraction method and visualizes the pathways using JDesigner module provided in the system biology workbench (SBW) [14]

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.281-285
• /
• 2006

As the needs of wind energy increase, the more sites for the wind farm are required. As a part of searching for the prominent wind farm site, specially for offshore wind farm, we chose 4 sites along the southern part seashore of JeonNam province based on the analysis of the data gathered by meteorological observatory ud have gathered wind data for more than a year by use of 40m Met masts installed in the representative locations, ie. small islands of 4 different bay area. The siting for the Met masts were very limited by the geographical circumstances The wind data of those areas show a little lower annual average wind speeds, for the wind farm development, of 4m/s to 5.5m/s at the height of 40m above the ground level of the respective islands. The detail figures of one year wind data of those area are presented in this report.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.676-676
• /
• 2013

무기물 양자점을 광감응 염료로 사용하는 경우 양자점의 사이즈 조절만으로 밴드갭을 조절할 수 있어 광학적 특성 조절이 용이하며, 유기 염료보다 광흡수 능력이 뛰어난 장점을 가진다. 특히 카드뮴 계열의 CdS, CdSe 양자점을 순차적으로 증착하여 사용하는 경우 가시광 전 영역을 효율적으로 흡수, 이용할 수 있어 광전기화학 셀의 광전극으로 사용 시 높은 성능을 기대할 수 있다. 하지만, 카드뮴 계열 양자점의 경우 광전기화학 셀로의 구동에 있어 안정성이 낮은 문제점이 있으며, 이는 양자점에 남아있는 정공이 관여하는 양자점 부식 반응으로 인한 것이다. 본 연구에서는 보다 안정적이면서도 고효율의 광전기화학적 수소생산 시스템을 위해, CdSe/CdS 양자점 감응형 ZnO 나노선 광전극에 IrO2 촉매물질을 증착하였다. CdSe/CdS 양자점이 가시광 전 영역을 흡수하며, ZnO 나노선 구조를 통해 생성된 광전자를 효율적으로 포집하여 높은 광전류 특성을 기대할 수 있다. 나아가 산소생산용 조촉매로 많이 사용하는 $IrO_2$ 촉매 물질의 추가증착을 통해 양자점에서 생긴 정공을 빼 줌으로서 정공이 관여하는 양자점 부식 반응을 방지할 수 있다. 실험결과 촉매물질의 증착 이후 광전류 생성 특성 및 수소생산량이 증가하였으며, 안정성 또한 상당히 향상된 것을 확인할 수 있었다.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.561-563
• /
• 1999

The looper of a hot strip finishing mill is installed between each pair of stands and plays a key role to enhance the product quality of strip by controlling the tension and height of strip in each inter-stand. Though the conventional looper control has achieved the mass products of strip so far, it has difficulties not only tuning gains by means of errors which are caused by coupling effects between strip tension and looper angle both utilizing tension feedback. Therefore, the non-interactive control employing cross controller and tension feedback has been introduced in looper control system in order to overcome the coupling effects existing between tension and looper angle and track the reference tension efficiently. In this paper, we present the cross controllers which play a role to decouple reciprocal effects between tension and looper angle and show better performance.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.2
• /
• pp.171-178
• /
• 2014

In this study, the apparent contact angle on the hydrophilic/hydrophobic surfaces with micropillars was studied. The previous researches showed that the Wenzel equation and the Cassie-Baxter equation were thermodynamically derived for the rough hydrophilic/hydrophobic surfaces and generally referenced on the field of wetting phenomena. For the verification of both equations, the apparent contact angle on the hydrophilic/hydrophobic surfaces with micro-pillars was measured. In the comparison between the measured and estimated apparent contact angles with the equations, the differences between the apparent contact angles were analyzed. Conclusively, the available range and limitation of theoretical equations were investigated and further researches about the apparent contact angle on the rough surfaces were proposed.