• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.5
• /
• pp.1-1
• /
• 2001

비휘발성 메모리 소자로의 응용의 관점에서, sol-gel 방법으로 La 을 10mo1% 로 고정시킨 PLZT (10/y/z) 박막을 제작하여 Zr/Ti 조성비에 따른 구조적 및 전기적 특성을 조사하였다. PLZT(10/40/60) 박막은 로제트와 파이로클로르 상이 관찰되었으며, Zr/Ti 조성비에서 Ti 함유량이 증가함에 따라, (100) 배향성, 결정립 크기와 표면 거칠기는 증가되었다. 또한 Zr/Ti 조성비에서 Ti 함유량이 증가함에 따라, 10㎑ 에서 비유전율은 600 에서 400 으로 감소된 반면, 유전손실은 0.028 에서 0.053 로 증가되었으며, 170 ㎸/cm 에서 누설전류밀도는 1.64×$10^{-6}$ 에서 1.26×$10^{-7}$A/㎠ 으로 감소되었다. 그리고 ± 170㎸/㎝ 에서 측정한 PLZT 박막의 이력곡선을 측정한 결과, Zr/Ti 조성비가 40/60 에서 0/100 로 변화함에 따라 PLZT 박막의 잔류분극과 항전계는 6.62 에서 12.86 μC/cm2, 32.15 에서 56.45㎸/㎝ 로 각각 증가되었으며, 피로와 retention 특성 역시 개선되었다. PLZT 박막에 ±5V 의 사각펄스를 $10^9$ 회 인가하여 피로특성을 측정한 결과, PLZT(10/40/60) 박막의 잔류분극은 초기분극값으로부터 50% 감소된 반면, PLZT(10/0/100) 박막은 30% 감소되었다. 또, $10^5$ 초의 retention 결과에서 PLZT(10/0/100) 박막은 초기분극값에서 오직 11% 만이 감소된 반면, PLZT(10/40/60) 박막은 40% 감소되었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.204-205
• /
• 2007

Self-seed 층을 이용한 PLZT(9/65/35), 강유전체 박막을 Sol-Gel 법을 이용해 Pt/Ti/$SiO_2$/Si 기판 위에 증착한 후, Self-seed 층에 의한 PLZT(9/65/35) 박막의 구조적, 전기적 특성을 고찰하였다. Seed 층을 도입하지 않은 PLZT 박막의 경우 다결정 상으로 형성되는 것을 알 수 있었으며, seed 층을 도입한 PLZT 박막은 (110) 방향으로 우선 배향됨을 알 수 있었다. 증착된 PLZT(9/65/35) 박막의 유전율 및 유전손살은 10kHz에서 유전율 205, 유전손살 0.029 이었으며, Self-seed layer를 도입한 PLZT 박막의 경우 seed layer를 도입하지 않은 PLZT 박막보다 낮은 온도에서 결정화 되는 것을 관찰 할 수 있었다. Self-seed layer가 도입된 PLZT(9/65/35) 박막의 경우 잔류분극 ($P_r$) 값은 $9.1{\mu}C/cm^2$, 항전계($E_c$)는 47 kV/cm을 나타내었다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.5
• /
• pp.313-322
• /
• 2001

The effects of Zr/Ti concentration ratio in PLZT (10/y/z) thin films prepared by sol-gel method are investigated for the NVFRAM application. Rosette and pyrochlore phase are observed in PLZT (10/40/60) thin film and the (100) orientation, the grain size, and the surface roughness of PLZT thin films increase due to the increase of Ti amount in Zr/Ti concentration ratio. As Ti amount of Zr/Ti concentration ratio increases, the dielectric constants at 10KHz decrease from 600 to 400, while the loss tangents increase from 0.028 to 0.053 and the leakage current densities at 170 kY/cm decrease from 1.64$\times$10$^{-6}$ to 1.26$\times$10$^{-7}$ A/$\textrm{cm}^2$. In the results of hysteresis loops measured at $\pm$ 170 ㎸/cm, the remanent polarization and the coercive field increase from 6.62 to 12.86 $\mu$C/$\textrm{cm}^2$ and from 32.15 to 56.45 ㎸/cm, respectively, according to the change from 40/60 to 0/100 in Zr/Ti concentration ratio. Fatigue and retention properties also improve much as the Zr/Ti concentration ratio change from 40/60 to 0/100. After applying 10$^{9}$ square pulses with $\pm$5V, the remanent polarization of the PLZT (10/40/60) thin film decreases 50％ from the initial state while that of the PLZT (10/0/100) thin film decreases 30％. In the results of retention measurements of 10$^{5}$ s, the remanent polarization of the PLZT (10/0/100) thin film decreases only 11％ from the initial state, while that of the PLZT (10/40/60) thin film decreases 40%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.225-225
• /
• 2008

PLZT 박막을 Pt/Ti/$SiO_2$/Si 기판 위에 RF-마그네트론 스퍼터링방법으로 형성할 때 기판온도에 따른 PLZT 박막의 결정성과 전기적 특성 및 강유전 특성에 미치는 영향에 관하여 연구하였다. 하부전극 Pt와 PLZT 박막 사이에는 완충층으로 $TiO_2$를 사용하여 계면에서의 상호확산을 제어하면서 우수한 물성의 PLZT 박막을 얻고자 하였으며, 여러 기판온도에서 PLZT 박막을 증착한 후, 박막의 결정화를 위해 급속열처리법으로 $700^{\circ}C$로 후열처리하였다. 그 결과 기판온도 $400^{\circ}C$에서 증착한 PLZT 박막이 가장 우수한 특성을 나타내었으며, 이때의 잔류분극과 누설전류밀도는 각각 15.8 ${\mu}C/cm^2$, $5.4\times10^{-9}A/cm^2$ 이였다. 그러나 $500^{\circ}C$에서는 결정립 조대화현상이 나타나면서 잔류분극과 누설전류밀도는 9 ${\mu}C/cm^2$, $3.09\times10^{-7}A/cm^2$로 특성이 저하되었다.

• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.560-565
• /
• 2008

$(Pb_{0.98}La_{0.08})(Zr_{0.65}Ti_{0.35})O_3$ (PLZT) thin films with $TiO_2$ buffer layers were deposited on Pt/Ti/$SiO_2$/Si substrates by an R.F. magnetron sputtering method in order to improve the ferroelectric characteristics of the films. And the ferroelectric properties and crystallinities of the PLZT thin films were investigated in terms of the effects of the post annealing temperatures of $TiO_2$ buffer layers between a platinum bottom electrode and PLZT thin film. The ferroelectric properties of the PLZT thin films improved as increasing of the post annealing temperatures of $TiO_2$ layers, thereby reaching their maximum at $600^{\circ}C$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.609-615
• /
• 2005

The effects of Zr/Ti concentration ratio in PLZT (10/y/z) thin films prepared by sol-gel method are investigated for the NVFRAM application. As Ti amount of Zr/Ti concentration ratio increases, the dielectric constants at 10 kHz decrease from 550 to 400, while the loss tangents increase from 0.028 to 0.053 and the leakage current densities at 170 kV/cm decrease from $1.64\times10^{-6}$ to $1.26\times10^{-7}\;A/cm^2$. In the results of hysteresis loops measured at $\pm170kV/cm$, the remanent polarization and the coercive field increase from 6.62 to $12.86{\mu}C/cm^2$ and from 32.15 to 56.45 kV/cm, respectively, according to the change from 40/60 to 0/100 in Zr/Ti concentration ratio. Fatigue and retention properties also improve much as the Zr/Ti concentration ratio change from 40/60 to 0/100. After applying $10^9$ square pulses with $\pm5V$, the remanent polarization of the PLZT (10/40/60) thin film decreases $50\%$ from the initial state while that of the PLZT (10/0/100) thin film decreases $28\%$. In the results of retention measurements of 10s s, the remanent polarization of the PLZT (10/0/100) thin film dec.eases only $10\%$ from the initial state, while that of the PLZT (10/40/60) thin film decreases $40\%$.

• Journal of the Korean Vacuum Society
• /
• v.16 no.6
• /
• pp.446-452
• /
• 2007

[ $(Pb_{1.1},La_{0.08})(Zr_{0.65}.Ti_{0.35})O_3$ ] thin films on the $Pt/Ti/SiO_2/Si$, $TiO_2(interlayer)/Pt/Ti/SiO_2/Si$ substrate were fabricated by the R.F. magnetron-sputtering method and considered their characteristics depending on $TiO_2$ interlayer. Changing the deposition conditions of $TiO_2$ interlayer, we obtained $TiO_2$ anatase single phase and rutile single phase. PLZT was deposited on these substrates and analyzed by x-ray diffraction(XRD) for there crystallinity and orientation. To investigate $PLZT-TiO_2$, $TiO_2-Pt$ interface, glow discharge spectrometer(GDS) analysis was carried out and we performed electrical measurements for dielectric properties of PLZT thin films. The PLZT thin film on $TiO_2$ anatase interlayer was found to have (110)-preferred orientation and 12.6 ${\mu}C/cm^2$ remaining polarization value.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.7
• /
• pp.535-540
• /
• 1998

Thin films of PLZT were prepared on indium tin oxide(ITO) coated glass substrates by sol-gel process and annealed by rapid thermal annealing(RTA) at $750^{\circ}C$ for 5 minutes. The crystal structure of PLZT thin films were investigated for a different Zr mol% content. XRD results showed that the crystallographic structure was transitted from tetragonal to rhombohedral structure as Zr mol% increased. Raman spectroscopy results showed that the bands of spectra became broader as the amount of Zr mol% increased and two crystal phase coexisted at 2/55/45 PLZT film. Raman spectroscopy was useful for crystal structure analysis of PLZT thin films.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.1
• /
• pp.57-61
• /
• 1998

In this study, PLZT stock solutions were prepared by Sol-Gel processing after the compositions were selected in the memory region of PLZT bulk phase diagram. PLZT solutions were deposited on the ITO glass substrate by spin-coating method. The thin films were annealed by rapid thermal processing. The electric characteristics, hysteresis loop, C-V characteristics of thin films in the memory region were measured in order to investigate the electrical characteristics of PLZT thin films. In selected compositions the decrease in Zr/Ti ratio led to an increase in dielectric constant and the decrease in remanent polarization and coercieve field which brought about slim hysteresis loop.

• Journal of the Korean Vacuum Society
• /
• v.18 no.2
• /
• pp.141-146
• /
• 2009

PLZT ferroelectric thin films were deposited on Pt/Ti/$SiO_2$/Si substrate with $TiO_2$ buffer layer in between by rf magnetron sputtering method. In order to investigate the effect of Ar/$O_2$ partial pressure ratio on the ferroelectric properties of PLZT thin films, PLZT thin films were deposited at various Ar/$O_2$ partial pressure ratio ; 27/1.5 seem, 23/5.5 seem, 21/7.5 seem and 19/9.5 seem. The crystallinities of PLZT thin films were analyzed by XRD. The surface morphology was observed using FE-SEM. The P-E hysteresis loops, the remanent polarization characteristics and the leakage current characteristics were obtained using a Precision LC. The crystallinity and elaborateness of PLZT thin films were decreased as increasing the oxygen partial pressure ratio. And preferred orientation of PLZT thin films changed from (110) plane to (111) plane. The oxygen partial pressure ratio affects the thin film surface morphology and the ferroelectric properties.