• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.167-172
• /
• 2008

The purpose of the project was intended to show an application method of RTOS to PICmicro with limited resources with several tasks controlling the peripheral devices. The application runs on the designed PIC16F87x evaluation board with a bootloader burned so the application program can be easily downloaded using the serial communication without using the ROM writer. Thus, it would also be a good example to use for instructional or tutorial purposes for PICmicro education. The demo shows a useful examples who wish to use the real time operation system in their own projects.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.684-686
• /
• 2000

Switched reluctance motor(SRM) has the advantages of simple structure, low rotor inertia. and high efficiency. However position sensor is essential in SRM in order to synchronize the phase excitation to the rotor position. The position sensors increase the cost of drive system and tend to reduce system reliability. This paper investigates the speed control of sensorless SRM in which the phase current and change rate are utilized in position decision, and the period of dwell angle is variable by compensating the rotor angle for speed control. The proposed system consists of position decision. phase locked loop controller, switching angle controller and inverter. The performances in the proposed system are verified through the experiment.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.3
• /
• pp.161-165
• /
• 2004

In this paper, we have designed the ground faults detection and interrupting controller at normal condition of AC 120v to 240v rating voltage. Ground faults in electrical network have the characteristics of low current, 60㎐ frequency to 2㎑frequency. The load condition are no load and 20A load. The trip level of the controller is 6㎃ with ground faults. The Controller algorithm is implemented using pic16c71 microprocessor.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.3
• /
• pp.11-16
• /
• 2014

In this paper, the two-wheels robot using a predictive controller to maintain the balance of the posture control in real time have been examined. A reaction wheel pendulum control method is adopted to maintain the balance while the bicycle robot is driving. The objective of this research was to design and implement a self-balancing algorithm using the dsPIC30F4013 embedded processor. To calculate the attitude in ARS using 2 axis gyro(roll, pitch) and 3 axis accelerometers (x, y, z). In this study, the disturbance of the posture for the asymmetrical propose to overcome the predictive controller which was a problem in the control of a remote system by introducing the two wheels of the robot controller and the linear prediction of the system controller combines the simulation was performed. Also, the robust characteristic for realizing the goal of designing a loop filter too robust controller is designed so that satisfactory stability of the control system to improve stability of the system to minimize degradation of performance was confirmed.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2149-2151
• /
• 2003

본 논문에서는 마이컴(PIC16C74)과 Tabu 탐색법 및 지능기법(퍼지 및 신경회로망)을 이용하여 고정밀 제어 및 강인한 제어 성능을 가지는 초소형 DC 모터용 지능형 제어기를 개발하였다. 이를 위해 마이컴(PIC16C74)를 이용한 지능형 제어 알고리즘을 개발하고, 초소형 DC 모터용 드라이브 회로 설계 및 제작하였다. 개발한 초소형 DC 모터 지능형 제어기는 디지털 자동 용접캐리지에 적용할 예정이며, 다른 응용 분야로써는 자동배수장치, 반도체 분야, 산업용 로봇 분야 및 조립자동화 시스템 분야 등에 사용되는 구동모터에 적용함으로서 정밀도와 외부의 잡음에 대한 영향을 경감시켜 안정성과 효율향상 및 에너지절약이 가능할 것이다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.6
• /
• pp.455-462
• /
• 2004

This paper is concerned with the implementation of the active vibration suppression controller using analog circuit and microprocessor. The target active vibration controller is the positive position feedback(PPF) controller since it provides a simple algorithm suitable for both analog circuit and digital controllers. In this study, the analog PPF controller is realized using an operational amplifier and the digital PPF controller is realized using a low-cost micro-controller. The circuit diagrams are explained in detail. We then discuss the advantages and disadvantages of both methods from the view of practical implementation. Experimental results show that both implementation methods can be effectively used for the active vibration control but need to be chosen based on the mission objective.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.148-152
• /
• 2003

This paper is concerned with the digital implementation of the active vibration suppression controller. The digital controllers are often implemented on the DSP board, which is very fast but expensive. There are many low-cost micro-controllers in the market but the feasibility of such micro-controllers for the active vibration suppression has never been conducted. In this study, we selected PIC 16F877 as a proper micro-controller for the digital implementation of the PPF controller. The circuit diagrams are explained in detail. Experimental results show that the low-cost micro-controller can be used as the active vibration controller.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2301-2303
• /
• 2002

This paper describes the development of temperature controller for seedbed heating system. This system consisted of three parts; sensing part, control part that includes the PID control algorithm, and actuating part. The control part introduced a phase angle control method of TRIAC and firmware technique using one-chip microcontroller(PIC16C73). For evaluating the performance of a PID control system, the experiment results by a developed controller are compared with these obtained from a conventional controller which utilize ON-OFF control method. The experiment results show that the proposed controller has good control performance.

• Journal of Advanced Navigation Technology
• /
• v.14 no.3
• /
• pp.321-327
• /
• 2010

This paper deals with the design and development of the motorized valve control system using CANopen protocol. The CAN network protocol is used in the physical layer(layer 1) and data link layer(layer 2), and other upper network layer above that layer 1 and 2 utilize the CANopen protocol in this paper. The motorized valve controller is implemented by a PIC microprocessor, and the server application software for the control system user is written in C# language. In particular the CANopen protocol is widely used int the area such as ship automation systems and marine transportation systems. The experimental result of the proposed control system implemented in this paper is evaluated via real-time experiments, which works well as designed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.612-615
• /
• 2013

Hub BLDC(Brushless Direct Current) motor, called wheel-in motor is a outer rotor type high efficient direct driving motor which have a multi-pole permanent magnet type rotor as a driving wheel. This study shows a hub BLDC motor speed controller design methode using PIC micro controller to drive 2 wheels or 3 wheels driving body having hub motor driving shaft. The motor driver unit consists of six discrete MOSFET switching devices and the gate driving module is directly designed for high economy.