• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2241-2243
• /
• 2005

Although the boundary image sticking is one of major factors to determine display quality in AC PDP, a reliable measurement method has not reported so far. The boundary image sticking is recognized clearly by our eyes, but it is difficult to compare with adjacent cells by using a measurement method. However, the boundary image sticking can be analyzed by CCD DSLR camera method because this method can distinguish between the boundary cell and the adjacent cells. Moreover, we suggested new driving waveform for the reduction of the boundary image sticking.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.788-790
• /
• 2003

Closed-cell type barrier ribs of PDP were formed by capillary molding process using molds prepared by inclined UV lithography process. Various types of molds with different inclined angles were prepared by patterning SU-8 thick photoresist film and casting with PDMS. The ribs with various type cells were successfully formed by the process. The effects of inclined angle on the distortion of barrier ribs during sintering were investigated. The results indicated that the barrier ribs with a draft angle and dimensional change does not affect the distortion of the barrier ribs during sintering, suggesting that the closed-cell must be isotropic in sintering shrinkage.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.167-170
• /
• 2005

The mechanism of striation in the coplanar- and matrix-type plasma display panel (PDP) cells has been studied using the particle-in-cell Monte-Carlo Collision (PIC-MCC) model. The striation formation is related to the ionization energy of neutral atoms and the well-like deformation of space potential by space charge distribution. Negative wall charge accumulation by electrons on the MgO surface of the anode region is also one of the key factors for the formation of striation. The clearness of the striation phenomenon in PIC-MCC code in comparison with fluid code can be explained by using nonlocal electron kinetic effect.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.29-32
• /
• 2007

We analyzed the effect of cell resolution on the luminous efficacy through three-dimensional numerical simulation to understand the inherent discharge mechanism change in the plasma display panel. As the resolution increases from VGA to Full HD, the luminous efficacy decreases. With higher Xe content, VUV generation efficacy of Full HD becomes much lower than those of VGA or XGA cells, due to the increased plasma loss and lower electron heating. However a long electrode gap $140{\mu}m$ in Full HD cell with Ne-Xe [20%] results in the high luminous efficacy comparable to that of the XGA cell with $60{\mu}m$ gap. When comparing the effects of Xe content variation on the luminous efficacy of two different subpixel types, i. e., SDE (Segmented electrode in Delta color arrayed, Enclosed subpixel) [1] and conventional stripe barrier type in the XGA and Full HD cells, the luminous efficacy of SDE structure shows higher improvement in Full HD resolution compared with that of conventional type XGA cell, whose cause is identified as the reduced plasma loss.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.9
• /
• pp.909-913
• /
• 2013

Various types of large substrate handling robots are used in the thin file solar cell manufacturing line as well as LCD or PDP production line. Because the robot handles the heavy substrate at high speed, there are some issues such as vibration control and the optimal design of arms and forks. As the substrate becomes larger and heavier, robot systems are also larger and the vibration issue of the robot end-effector becomes more important. In the paper, we established the robot modeling and the control architecture including the flexible part such as forks. Then, we performed dynamic simulation in the various condition and analyzed the characteristics of the fork vibration. We can reduce the vibration using the trajectory planning and input shaping algorithm and it was proved by experiment.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.575-578
• /
• 2004

The charging tendency of $Zn_2SiO_4:Mn^{2+}$ phosphor surface was modified in order to improve discharging characteristic of green cell in an ac-plasma display panel (ac-PDP). The Zinc-silicate ($Zn_2SiO_4:Mn^{2+}$) green-emitting phosphor was coated with magnesium oxide(MgO), which is viable to have positive charge on the surface. After fabricating the green cell with MgO-coated $Zn_2SiO_4:Mn^{2+}$, the electrical and optical properties in the cell were examined. It was found that the dynamic voltage margin could be increased while the address time was reduced. It may be ascribed to the change of charging tendency of $Zn_2SiO_4:Mn^{2+}$ phosphor by MgO coating, which makes it possible to stable wall-charge accumulation. When $Zn_2SiO_4:Mn^{2+}$ phosphor was coated with 1.3wt%-MgO, the address time was reduced 1.2 ${\mu}s$ and the address voltage lowered 25 V without any misfiring problem, compared to those of typical $Zn_2SiO_4:Mn^{2+}$ phosphor layer. The luminescence intensity of green cell using MgO-coated phosphor layer was also improved by 10%.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1555-1558
• /
• 2008

Various approaches were undertaken by major PDP makers in order to improve the luminous efficacy of the plasma discharge cells. There have been many reports that state that using a high Xe content PDP is one of the most promising key technologies available to improve the luminous efficacy. In the case of the higher Xe content panel, the higher address and sustain voltage were needed to drive the panel under the same reset condition. In this study, a variety of Xe content panels were investigated in order to examine wall voltage transfer behaviors. The transferred wall voltage status after addressing discharge at the same driving condition was analyzed by comparing Vt close curve of high and low Xe content panels. Through this analysis of Vt close curve difference, the driving waveform of a high Xe panel was quantitatively adjusted Under the same address voltage condition, results showed that the amount of the transferred wall voltage and Vt close curve after addressing discharge was matched for the first sustain discharge. Taking these results into consideration, we conclude that the driving waveform for different Xe content panels could be designed for the desired addressing discharge condition and the wall voltage state of the cell could be quantitatively controlled and measured through these approaches.

• Journal of IKEEE
• /
• v.12 no.1
• /
• pp.1-7
• /
• 2008

With the recent development of portable system such as mobile communication and multimedia. Full adders are important components in applications such as digital signal processors and microprocessors. Thus It is important to improve the power dissipation and operating speed for designing a full adder. We propose a new adder with modified version of conventional Ratioed logic and Pass Transistor logic. The proposed adder has the advantages over the conventional CMOS, TGA, 14T logic. The delay time is improved by 13% comparing to the average value and PDP(Power Delay Product) is improved by 9% comparing to the average value. Layouts have been carried out using a 0.18um CMOS design rule for evaluation purposes. The physical design has been evaluated using HSPICE.

• Applied Chemistry for Engineering
• /
• v.24 no.3
• /
• pp.266-273
• /
• 2013

Phthalocyanine (Pc), porphyrin, subphthalocyanine, and perylene compounds can be applicable to the fields of optical storage media, organic solar cell, LCD, PDP, semiconductor, and counterfeit money detection etc. In this study, phthalocyanine hybrid derivatives were synthesized by cross-linking perylene, subphthalocyanine, or porphyrin to the main frame of Pc. Absorbtion band of two different wavelengths appeared simultaneously in the phthalocyanine hybrid derivatives. Compared to phthalocyanine, the solubility was enhanced and the degree of Q-band shift was changed according to the kind of substitute compounds. The chemical and optical properties of samples were analyzed using FT-IR, $^1H-NMR$, and UV-Vis spectroscopic techniques.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.59-62
• /
• 2004

We investigated the effect of Xe content variation on the luminous efficiency of two different sub-pixel types, i.e., segmented electrode in delta color arrayed enclosed sub-pixel (SDE) and conventional stripe barrier type, in an ac plasma display panel through three-dimensional numerical simulations. The conventional cell type was found to have higher VUV generation efficiency as compared with that of SDE structure, but as the Xe content increased, the SDE type showed higher improvements in efficiency due to the lower plasma loss to the barrier walls.