• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2000년도 추계학술대회 및 정기총회
• /
• pp.141-147
• /
• 2000

For miniaturization of electronic parts and higher productivity, part arrangement job of PCB(printed Circuit Board) has been replaced with complete automated facilities, and contribution which is concerned about this will be expanded continuously. Such part arrangement job of PCB could have lots of influences to entire productivity In this paper, effective grouping method of parts is suggested for the effective insertion path job of PCB concerning the constraints to the size of parts.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2001년도 춘계학술발표논문집 (하)
• /
• pp.1209-1212
• /
• 2001

본 논문에서는 PCB(Printed Circuit Board)회로에서 고속 신호들을 전달하는 배선의 특성 및 배선의 요구사항에 의한 설계 규칙과 이론화된 공식은 이용하여 PCB상에 배치되는 부품들간의 배선경로를 추적하여 해당 배선의 특성을 분석하고, 흐르는 신호의 특성 및 해당 신호의 전기/전자적인 시뮬레이션을 수행할 수 있도록 하는 PCB회로의 신호통합 시뮬레이터에 대하여 언급하고 실험을 통하여 시뮬레이션의 타당성을 검증하였다.

• 대한기계학회논문집
• /
• 제19권12호
• /
• pp.3329-3343
• /
• 1995

The interaction of mixed convection and surface radiation in a printed circuit board(PCB) is investigated numerically. The electronic equipment is modeled by a two-dimensional channel with three hot blocks. In order to calculate the turbulent flow characteristics, the low Reynolds number k-.epsilon. model which is proposed by Launder and Sharma is applied. The S-4 approximation is used to solve the radiative transfer equation. The effects of the Reynolds number and geometric configuration variation of PCB on the flow and heat transfer characteristics are analyzed. As the results of this study, it is found that the thermal boundary layer occured at adiabatic wall in case with thermal radiation included, and the effect of radiation is also found to be insignificant for high Reynolds numbers. It is found, as well, that the heat transfer increases as the Reynolds number and block space increase and the channel height decreases and the heat transfer of vertical channel is greater than that of horizontal channel.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.151-155
• /
• 2002

This paper presents a micro fluxgate magnetic sensor in printed circuit board (PCB). The fluxgate sensor consists of five PCB stack layers including one layer magnetic core and four layers of excitation and pick-up coils. The center layer as a magnetic core is made of a micro patterned amorphous magnetic ribbon with extremely high DC permeability of ∼100,000 and the core has a rectangular-ring shape. The amorphous magnetic core is easily saturated due to the low coercive field and closed magnetic path for the excitation field. Four outer layers as an excitation and pick-up coils have a planar solenoid structure. The chip size of the fabricated sensing element is 7.3${\times}$5.7m㎡. Excellent linear response over the range of -100${\mu}$T to +100${\mu}$T is obtained with 540V/T sensitivity at excitation square wave of 3V$\_$P-P/ and 360kHz. The very low power consumption of ∼8mW was measured. This magnetic sensing element which measures the lower fields than 50${\mu}$T, is very useful for various applications such as: portable navigation systems, military research, medical research, and space research.

• 한국공작기계학회논문집
• /
• 제16권1호
• /
• pp.47-52
• /
• 2007

A material mixing method to obtain an optimal topology for a structure in a thermal environment was suggested. This method is based on Evolutionary Structural Optimization(ESO). The proposed material mixing method extends the ESO method to a mixing several materials for a structure in the multicriteria optimization of thermal flux and thermal stress. To do this, the multiobjective optimization technique was implemented. The overall efficiency of material usage was measured in terms of the combination of thermal stress levels and heat flux densities by using a combination strategy with weighting factors. Also, a smoothing scheme was implemented to suppress the checkerboard pattern in the procedure of topology optimization. It is concluded that ESO method with a smoothing scheme is effectively applied to topology optimization. Optimal topologies having multiple thermal criteria for a printed circuit board(PCB) substrate were presented to illustrate validity of the suggested material mixing method. It was found that the suggested method works very well for the multicriteria topology optimization.

• 한국소음진동공학회논문집
• /
• 제14권9호
• /
• pp.891-896
• /
• 2004

'Coil' occupies very much important position in delivering driving force of optical pick-up actuators. Up to now the main stream has been a winding coil type actuator, but actuators using FP-Coil(fine pattern coil) have been considered for the more compacted and simple manufacturing process and have variously spreaded the application fields by product. We have tried to design actuators using PCB-Coil(printed circuit board coil) which has benefits in terms of price and manufacturing process. Especially this research has two main things to reduce the vibration of sub-resonance and to assure the DC sensitivity among the performances of asymmetric optical pick-up actuator with PCB-Coil.

• 전기전자학회논문지
• /
• 제23권3호
• /
• pp.873-877
• /
• 2019

본 논문에서는 휴대단말기 안테나의 대표적 형태인 역 F 안테나(Inverted F Antenna, IFA)와 루프(Loop) 안테나에 따른 디지털 노이즈의 결합(coupling) 정도를 특성모드(characteristic mode)를 사용하여 분석한다. 우선, 안테나를 포함한 인쇄회로기판(Printed Circuit Board, PCB)의 특성모드 전류와 디지털 신호라인의 방향에 따른 결합 정도를 비교 분석하고, 이를 토대로 휴대단말기의 WiFi 안테나와 전방 카메라(front camera)의 결합에 대해서 분석한다. 분석을 위해서 카메라 모듈의 FPCB의 디지털 신호선과 그라운드 선을 PCB 그라운드의 특성 모드를 여기(excitation) 시키는 루프형 피더(feeder)로 모델링 했고, 안테나 타입(type)에 따른 노이즈 결합 변화에 대해서 분석을 했다.

• 한국산학기술학회논문지
• /
• 제20권7호
• /
• pp.310-316
• /
• 2019

자동차 편의 장치에 대하여 고객들은 높은 효율과 많은 기능을 요구하고 있으며, 이러한 자동차 어플리케이션에 대한 수요가 지속적으로 증가하고 있다. 본 연구에서는 최근 자동차 편의 사양으로 개발된 무선충전기의 PCB(printed circuit board) 발열 성능 향상을 위한 열 유동해석에 관한 연구를 진행하였다. 무선충전기는 PCB의 전력 손실 및 열 저항의 특성 발열에 따라 충전의 성능이 급격히 저하된다. 따라서 열 유동해석 시뮬레이션을 통해 최적의 PCB 설계 및 부품의 실장 위치를 제안하고, 각 설계 단계에서 해석을 통해 디자인을 결정한다. 이후, 실제 환경 조건에서 해석결과 정합성 검증을 위해 시험을 수행하고 결과를 비교 분석한다. 본 논문에서는 HyperLynx Thermal와 FloTHERM 프로그램을 사용하여 PCB 모델링 및 과도 응답 열 유동해석을 수행하였다. 또한, 해석 및 측정 결과의 정합성 검증을 위해 적외선 열화상 카메라를 사용하여 시험을 진행하였다. 최종 결과 비교에서 해석과 시험의 오차는 10 % 이내로 확인되었고, PCB의 발열 성능도 향상되었다.

• 한국전자통신학회논문지
• /
• 제10권1호
• /
• pp.27-32
• /
• 2015

본 논문에서는 GNSS(Global-Navigation Satellite Service)에서 사용되는 단말기의 PCB(Printed Circuit Board) 전원안정화를 위해서 PCB 내층에 삽입될 EBG(Electromagnetic Band Gap) 구조체를 제안한다. 버섯모양의 제안된 EBG 구조체를 통한 PCB에서의 관심 금지대역폭/저지대역폭 주파수는 GNSS와 이동통신 관련 주파수를 포함하는 1.55GHz에서 1.81GHz이었으며, 시뮬레이션 결과, 이 구간에서 삽입손실(S21)이 약 -40dB 이하로 형성됨을 볼 수 있었다. 본 연구결과는 향후, PCB 회로 설계의 PDN(Power Delivery Network)구조의 안정화 향상 및 EMI(Electro Magnetic Interference) 대책에 효과적 대응이 유용할 것으로 기대된다.

• 한국항해학회지
• /
• 제23권2호
• /
• pp.61-66
• /
• 1999

It is being more and more difficult to suppress emissions from electronic products using PCB(Printed Circuit Board) to the limit. Therefore, the exact evaluation of the emission from PCB has been more important to reduce the required time and the cost at the design phase of the products, especially on board ship's equipments. This research has evaluated the emission radiated from PCB based on the theoretical approach of SDA(Spectral Domain Analysis), which is available to analyze microwave stripline, coplanar line, patch antenna, etc. According to the theoretical results, it has been clearly shown that the emission radiated from PCB is reduced as the thickness of PCB is thinner, the permittivity of PCB is higher, the length of stripline is shorter, and the frequency is lower.