• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.764-766
• /
• 1998

An evaluation method for oxygen permeable characteristics of the membrane covering to each cathode of multiple cathode - single anode type dissolved oxygen sensor, which has high reproducibility and is capable of measuring multiple components in solutions. For this purpose, a measuring circuit for the multiple cathode type DO sensor was designed to lower the noise signal by adapting a digital LPF to readout the sensor output accurately. Digital LPF is designed by setting up the transfer function to set the cutoff frequency to 10Hz, and the transfer function is programmed by C language, and then the filtering characteristics are evaluated with the simulation and experiments. Using this LPF added measuring circuit for the multiple cathode type DO sensor, we have obtained the calibration factor for each cathode to calibrate the variation of the output signals. The calibration factor was obtained by measuring the sensor output signal followed by oxygen partial pressure, using the same oxygen permeable membrane at each cathode of the multiple cathode type DO sensor.

• KSBB Journal
• /
• 제28권1호
• /
• pp.24-30
• /
• 2013

Dissolved oxygen, pH and cell concentration have been online monitored in cultivation processes with Escherichia coli by using a $MABOOMS^{TM}$ (microplate-based bioreactor with optical online monitoring systems). Fluorescent sensing membranes containing Ru ${(dpp)_3}^{2+}$ or HPTS were prepared with GA sol-gel matrix and coated into a well of a 24-well microplate. Fluorescence intensity was measured and correlated to the dissolved oxygen or pH. Cell concentrations were also online monitored by measuring optical reflectance at 650 nm. A well of a 24-well microplate could also be divided into 4 parts, each of which was coated with fluorescent sensing membranes for the detection of dissolved oxygen or pH. The 24-well microplate coated with fluorescent sensing membranes or a 4-divided sensing membrane. was used to online monitor the dissolved oxygen, pH and cell concentration during E. coli cultivations. The online monitoring results showed the characteristics of cell growth in cultivation processes very well.

• 멤브레인
• /
• 제25권1호
• /
• pp.75-83
• /
• 2015

본 연구에서는 우리 주위에서 흔히 채취할 수 있는 식물을 이용하여 엽록체를 추출하고, 이를 다양한 방법으로 PP부직포 위에 도포하여 복합막을 제작하였으며, 산소 발생여부에 대한 연구를 진행하였다. 제조된 엽록체의 도입 방법에 따른 실험에서, 딥(dipping) 코팅법과 스프레이(spraying) 코팅법을 이용하였으며, 밀폐된 용기와 진공오븐 내 초를 이용한 연소 시험 모두에서 스프레이 코팅이 비교적 우수한 결과를 나타내었다. 또한, 엽록체의 활성을 증가시키기 위해 nylon6/6 나노섬유를 PP부직포 위에 전기방사하여 복합지지체를 제조한 후, 엽록체를 도입하여 제조한 샘플의 경우, 나노섬유가 도입되지 않은 샘플에 비해 낮은 활성을 가진다는 것을 확인하였다. $TiO_2$가 포함된 샘플들의 경우, 포함되지 않은 샘플들에 비해 엽록체 함량이 50%가 도입되었지만, 16%에서 21%까지 도달되는 시간과 초를 이용한 연소실험에서 각각 유사한 결과값을 나타내었다. 따라서 본 연구에서 도입된 스프레이 코팅법과 $TiO_2$ 접목은 산소발생용 분리막 및 공기청정기용 필터소재로의 응용에 대한 기초연구 자료로 활용할 수 있을 것으로 기대된다.

• Journal of Chest Surgery
• /
• 제43권1호
• /
• pp.104-107
• /
• 2010

급성호흡부전증후군은 치료가 어렵고 치명율이 높다. 인공호흡기 치료에 반응하지 않는 중증의 경우 체외막 산화기(Extracorporeal membrane oxygenation, ECMO)가 적용되고 있다. 교통사고로 다발성 외상을 받은 21세 여자가 흉부 방사선상 양측폐에 심한 침윤 소견과 동맥혈가스 검사상 급성호흡부전증후군(Acute respiratory distress syndrome, ARDS)으로 판단되어 정맥동맥 체외산화기(Veno- arterial Extracorporeal Membrane Oxygenation, VA ECMO) 치료를 시작하였다. ECMO 적용 2일째 흉부 방사선상 폐 침윤 소견 악화되면서 동맥혈 산소 포화도(Systemic oxygen saturation, $SaO_2$)가 85% 미만으로 저하되었다. 이에 중추신경계와 폐의 산소화를 향상시키기 위해 ECMO의 유출로에 곁회로를 이용하여 우측 경정맥에 연결하여 정맥-정맥동맥 ECMO (Veno-venoarterial ECMO, V-VA ECMO)로 전환하였고 이후 동맥혈 산소 분압($PaO_2$) 65 mmHg, $SaO_2$ 94%로 향상되었다. V-VA ECMO로의 전환은 전신에 산소 공급을 늘리기 위해 고려해 볼 수 있는 방법으로 생각된다.

• 멤브레인
• /
• 제22권1호
• /
• pp.8-15
• /
• 2012

다공성 $La_{0.6}Sr_{0.4}Ti_{0.3}Fe_{0.7}O_{3-{\delta}}$로 코팅된 $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ 관형 분리막은 압출성형 및 dip coating 방법으로 제조 되었다. 코팅된 관형 분리막의 특성은 X-선 회절분석기(XRD)와 전자 주사 현미경(SEM)을 이용하여 분석하였으며, 분석결과 $2{\mu}m$의 다공성 코팅 층을 갖는 페롭스카이트 구조임을 알 수 있었다. 산소투과량 분석은 $750{\sim}950^{\circ}C$ 범위에서 공급측과 투과 측을 대기 중 공기와 진공으로 하여 수행되었다. 다공성의 $La_{0.6}Sr_{0.4}Ti_{0.3}Fe_{0.7}O_{3-{\delta}}$로 코팅된 $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ 관형 분리막의 산소투과량은 $950^{\circ}C$에서 $3.2mL/min{\cdot}cm^2$로 코팅되지 않은 분리막보다 높게 나타났으며, 11일 동안의 장기 안정성 실험결과 코팅 층에 의해 안정성이 증가됨을 알 수 있었다.

• 전기화학회지
• /
• 제15권1호
• /
• pp.12-18
• /
• 2012

다양한 응용분야에서 활용될 수 있는 고체고분자연료전지의 경우 현재 상용화에 가장 큰 걸림돌이 되고 있는 것이 고가의 백금 촉매이다. 따라서 특히 최근 들어 산소환원반응에서 백금을 대체하는 물질을 개발하기 위한 연구가 전세계적으로 확산되고 있다. 그러나 촉매 개발 시 경제성 관점 외에 내구성도 고려해야 하는데, 이런 관점에서 백금과 유사한 물성과 활성이 기대되는 백금족 원소들이 한 대안이 될 것이다. 가장 백금과 유사한 물성, 활성을 나타내는 팔라듐과 칼코겐화물 형태의 루테늄이 지금까지 가장 많이 연구가 되었으며 상대적으로 이리듐, 로듐, 오스뮴은 산소환원 촉매로 많은 연구가 되지 않았다. RDE (rotating disk electrode)를 이용한 반쪽전지 실험이나 연료전지 MEA (membrane electrode assembly) 운전을 통하여 백금과 활성을 비교해보면 팔라듐 계열의 비백금 촉매가 가장 백금에 가까운 활성을 나타내고 있음을 알 수 있다. 이 논문에서는 각 백금족 원소들 기반의, 현재까지 문헌상으로 보고된 촉매조성들을 분석하여 비백금 산소환원 촉매 개발에 도움이 되고자 한다.

• 한국물환경학회지
• /
• 제30권4호
• /
• pp.386-393
• /
• 2014

The aim of this study was to investigate the nutrient removal and biomass productivity in the wastewater using MMBR (Microalgae Membrane Bioreactor). MMBR process was combined OPPBR (Optical Panel Photobioreactor) and MBR (Membrane bioreactor). The OPPBR and MBR were operated 3 days and 9h HRT (Hydraulic retention time), respectively, using microalgae as Chlorella vulgaris. The obtained result indicated that the biomass productivity of 0.498 g/L/d with light transmittance of 92% at a 305 mm depth in the OPPBR was achieved. The total consumption of BOD (Biochemical Oxygen Demand) and COD (Chemical Oxygen Demand) in the MMBR were found to be 97.56% and 96.06%, respectively. Additionally, the removal of TN, $NO_3-N$, TP and $PO_4-P$ were 94.94%, 91.04%, 99.54% and 93.06% in MMBR, respectively. These results indicated that the MMBR process was highly effective for COD, BOD and nutrient removal when compared to the separate OPPBR or MBR process. The MMBR process was effective for nutrient removal and biomass productivity and can be applied to treat wastewater in sewage treatment plant.

• Membrane and Water Treatment
• /
• 제6권6호
• /
• pp.489-499
• /
• 2015

In this work, treatment of real hypersaline refinery wastewater by hollow fiber membrane bioreactor coupled with reverse osmosis unit was studied. The ability of HF-MBR and RO developed in this work, was evaluated through examination of the effluent properties under various operating conditions including hydraulic retention time and flux. Arak refinery wastewater was employed as influent of the bioreactor which consists of an immersed ultrafiltation membrane. The HF-MBR/RO was run for 6 months. Average elimination performance of chemical oxygen demand, biological oxygen demand, total suspended solids, volatile suspended solids, total dissolved soild and turbidity were obtained 82%, 89%, 98%, 99%, 99% and 98% respectively. Highly removal performance of oily contaminant, TDS and the complete retention of suspends solids implies good potential of the HF-MBR/RO system for wastewater refinement.

• Membrane and Water Treatment
• /
• 제7권1호
• /
• pp.11-22
• /
• 2016

The characterization of treatment performance with respect to mixed liquor suspended solids (MLSS) concentration enables greater control over system performance and contaminant removal efficiency. Hybrid membrane bioreactors (HMBRs) have yet to be well characterized in this regard, particularly in the context of greywater treatment. The aim of this study, therefore, was to determine the optimal MLSS concentration for a decentralized HMBR greywater reclamation system under typical loading conditions. Treatment performance was measured at MLSS concentrations ranging from 1000 to 4000 mg/L. The treated effluent was characterized in terms of biochemical oxygen demand ($BOD_5$), chemical oxygen demand (COD), turbidity, ammonia ($NH_3$), total phosphorus (TP), total kjeldahl nitrogen (TKN), and total nitrogen (TN). An MLSS concentration ranging from 3000 to 4000 mg/L yielded optimal results, with $BOD_5$, COD, turbidity, $NH_3$, TP, TKN, and TN removals reaching 99.2%, 97.8%, 99.8%, 99.9%, 97.9%, 95.1%, and 44.8%, respectively. The corresponding food-to-microorganism ratio during these trials was approximately 0.23 to 0.28. Operation at an MLSS concentration of 1000 mg/L resulted in an irrecoverable loss of floc, and contaminant residuals exceeded typical guideline values for reuse in non-potable water applications. Therefore, it is suggested that operation at or below this threshold be avoided.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2003년도 The 4th Korea-Italy Workshop
• /
• pp.133-135
• /
• 2003

The removal of dissolved oxygen(DO) from water was studied using a poly(vinyliene fluoride)(PVDF) hollow fiber membrane contactor(HFMC) with the vacuum degassing process(VDP), Asymmetric porous PVDF hollow fiber membranes (HFM) for membrane contactor were prepared by a wet phase inversion method. In spinning of these PVDF hollow fibers, dimethy lacetamide (DMAc), LiCl and pure water were used as a solvent, a pore-forming additive and internal/external coagulant, respectively. The characteristics of the structure(pore size, porosity etc.) of the prepared PVDF HFMs as a function of concentration of pore-forming additive in polymer dope solution were studied. Also, the removal efficiency of DO from water according to flow rates of water, using PVDF HFMC with VDP, was studied. The performance of the asymmetric porous PVDF HFMC and a symmetric porous PP HFMC commercialized were compared. As a result, the asymmetric porous PVDF HFMC showed higher removal efficiency of DO than that of a symmetric porous PP HFMC.