• Transactions on Electrical and Electronic Materials
• /
• 제16권5호
• /
• pp.254-259
• /
• 2015

This paper reports the optimized mixed-signal performance of a high-voltage (HV) laterally double-diffused metaloxide-semiconductor (LDMOS) field-effect transistor (FET) with a dual gate oxide (DGOX). The fabricated device is based on the split-gate FET concept. In addition, the gate oxide on the source-side channel is thicker than that on the drain-side channel. The experiment results showed that the electrical characteristics are strongly dependent on the source-side channel length with a thick gate oxide. The digital and analog performances according to the source-side channel length of the DGOX LDMOS device were examined for circuit applications. The HV DGOX device with various source-side channel lengths showed reduced by maximum 37% on-resistance (R_ON) and 50% drain conductance (g_ds). Therefore, the optimized mixed-signal performance of the HV DGOX device can be obtained when the source-side channel length with a thick gate oxide is shorter than half of the channel length.

• 전기전자학회논문지
• /
• 제27권4호
• /
• pp.399-404
• /
• 2023

본 논문에서는 3D NAND Flash memory의 O/N/O(Oxide/Nitride/Oxide) 구조와 blocking oxide를 ferroelectric material로 대체한 O/N/F(Oxide/Nitride/Ferroelectric) 구조의 current path를 분석했다. O/N/O 구조는 V_read가 인가되면 neighboring cell의 E-field로 인해 current path가 channel 후면에 형성된다. 반면 O/N/F 구조는 ferroelectric material의 polarization으로 인해 electron이 channel 전면으로 이동하여 current path가 전면에 형성된다. 또한 channel thickness와 channel length에 따른 소자 특성을 분석했다. 분석 결과 O/N/F 구조의 전면 electron current density 증가는 O/N/O 구조보다 2.8배 더 높았고 O/N/F 구조의 전면 electron current density 비율이 17.7% 높았다. 따라서 O/N/O 구조보다 O/N/F 구조에서 전면 current path가 더 효과적으로 형성된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.256-256
• /
• 2012

Oxide semiconductors such as zinc tin oxide (ZTO) or indium gallium zinc oxide (IGZO) have attracted a lot of research interest owing to their high potential for application as thin film transistors (TFTs) [1,2]. However, the instability of oxide TFTs remains as an obstacle to overcome for practical applications to electronic devices. Several studies have reported that the electrical characteristics of ZnO-based transistors are very sensitive to oxygen, hydrogen, and water [3,4,5]. To improve the reliability issue for the amorphous InGaZnO (a-IGZO) thin-film transistor, back channel passivation layer is essential for the long term bias stability. In this study, we investigated the instability of amorphous indium-gallium-zinc-oxide (IGZO) thin film transistors (TFTs) by the back channel contaminations. The effect of back channel contaminations (humidity or oxygen) on oxide transistor is of importance because it might affect the transistor performance. To remove this environmental condition, we performed vacuum seasoning before the deposition of hybrid passivation layer and acquired improved stability. It was found that vacuum seasoning can remove the back channel contamination if a-IGZO film. Therefore, to achieve highly stable oxide TFTs we suggest that adsorbed chemical gas molecules have to be eliminated from the back-channel prior to forming the passivation layers.

• 한국전기전자재료학회논문지
• /
• 제34권2호
• /
• pp.142-147
• /
• 2021

We present a subthreshold swing model for a symmetric junctionless double gate MOSFET. The scale length λ1 required to obtain the potential distribution using the Poisson's equation is a criterion for analyzing the short channel effect by an analytical model. In general, if the channel length Lg satisfies Lg > 1.5λ1, it is known that the analytical model can be sufficiently used to analyze short channel effects. The scale length varies depending on the channel and oxide thickness as well as the dielectric constant of the channel and the oxide film. In this paper, we obtain the scale length for a constant permittivity (silicon and silicon dioxide), and derive the relationship between the scale length and the channel length satisfying the error range within 5%, compared with a numerical method. As a result, when the thickness of the oxide film is reduced to 1 nm, even in the case of Lg < λ1, the analytical subthreshold swing model proposed in this paper is observed to satisfy the error range of 5%. However, if the oxide thickness is increased to 3 nm and the channel thickness decreased to 6 nm, the analytical model can be used only for the channel length of Lg > 1.8λ1.

• 전기전자학회논문지
• /
• 제27권3호
• /
• pp.303-307
• /
• 2023

본 논문은 Buried Channel Array Transistor(BCAT) 소자의 Oxide 내부에 Total Ionizing Dose(TID) effects으로 인한 Electron-Hole Pair의 생성이 유도되어, Oxide 계면의 Hole Trap Charge의 증가에 따른 누설전류의 증가와 문턱 전압의 변화를 기존에 제안한 Partial Isolation Buried Channel Array Transistor(Pi-BCAT)구조와 비교 시뮬레이션 하여, Pi-BCAT 소자의 증가한 Oxide 면적과 상관없이 변화한 누설전류와 문턱 전압에서의 특성이 비대칭 도핑 BCAT 구조보다 우수함을 보여 준다.

• 한국전기전자재료학회논문지
• /
• 제13권9호
• /
• pp.729-734
• /
• 2000

Recently, Very Large Scale Integrated (VLSI) circuit & deep-submicron bulk Complementary Metal Oxide Semiconductor(CMOS) devices require gate electrode materials such as metal-silicide, Titanium-silicide for gate oxides. Many previous authors have researched the improvement sub-micron gate oxide quality. However, few have reported on the electrical quality and reliability on the ultra thin gate oxide. In this paper, at first, I recommand a novel shallow trench isolation structure to suppress the corner metal-oxide semiconductor field-effect transistor(MOSFET) inherent to shallow trench isolation for sub 0.1${\mu}{\textrm}{m}$ gate oxide. Different from using normal LOCOS technology deep-submicron CMOS devices using novel Shallow Trench Isolation(STI) technology have a unique"inverse narrow-channel effects"-when the channel width of the devices is scaled down, their threshold voltage is shrunk instead of increased as for the contribution of the channel edge current to the total channel current as the channel width is reduced. Secondly, Titanium silicide process clarified that fluorine contamination caused by the gate sidewall etching inhibits the silicidation reaction and accelerates agglomeration. To overcome these problems, a novel Two-step Deposited silicide(TDS) process has been developed. The key point of this process is the deposition and subsequent removal of titanium before silicidation. Based on the research, It is found that novel STI structure by the SEM, in addition to thermally stable silicide process was achieved. We also obtained the decrease threshold voltage value of the channel edge. resulting in the better improvement of the narrow channel effect. low sheet resistance and stress, and high threshold voltage. Besides, sheet resistance and stress value, rms(root mean square) by AFM were observed. On the electrical characteristics, low leakage current and trap density at the Si/SiO$_2$were confirmed by the high threshold voltage sub 0.1${\mu}{\textrm}{m}$ gate oxide.

• ETRI Journal
• /
• 제31권6호
• /
• pp.653-659
• /
• 2009

We have investigated the channel protection layer (PL) effect on the performance of an oxide thin film transistor (TFT) with a staggered top gate ZnO TFT and Al-doped zinc tin oxide (AZTO) TFT. Deposition of an ultra-thin PL on oxide semiconductor films enables TFTs to behave well by protecting the channel from a photo-resist (PR) stripper which removes the depleted surface of the active layer and increases the carrier amount in the channel. In addition, adopting a PL prevents channel contamination from the organic PR and results in high mobility and small subthreshold swings. The PL process plays a critical role in the performance of oxide TFTs. When a plasma process is introduced on the surface of an active layer during the PL process, and as the plasma power is increased, the TFT characteristics degrade, resulting in lower mobility and higher threshold voltage. Therefore, it is very important to form an interface using a minimized plasma process.

• 한국전기전자재료학회논문지
• /
• 제31권5호
• /
• pp.278-282
• /
• 2018

We propose a SPICE model of drain-induced barrier lowering (DIBL) for a junctionless cylindrical surrounding gate (JLCSG) MOSFETs. To this end, the potential distribution in the channel is obtained via the Poisson equation, and the threshold voltage model is presented for the JLCSG MOSFET. In a JLCSG nano-structured MOSFET, a channel radius affects the carrier transfer as well as the channel length and oxide thickness; therefore, DIBL should be expressed as a function of channel length, channel radius, and oxide thickness. Consequently, it can be seen that DIBLs are proportional to the power of -3 for the channel length, 2 for the channel radius, 1 for the thickness of the oxide film, and the constant of proportionality is 18.5 when the SPICE parameter, the static feedback coefficient ${\eta}$, is between 0.2 and 1.0. In particular, as the channel radius and the oxide film thickness increase, the value of ${\eta}$ remains nearly constant.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.252-253
• /
• 2011

ZnO-based thin film transistors (TFTs) are of great interest for application in next generation flat panel displays. Most research has been based on amorphous indium-gallium-zinc-oxide (IGZO) TFTs, rather than single binary oxides, such as ZnO, due to the reproducibility, uniformity, and surface smoothness of the IGZO active channel layer. However, recently, intrinsic ZnO-TFTs have been investigated, and TFT- arrayss have been demonstrated as prototypes of flat-panel displays and electronic circuits. However, ZnO thin films have some significant problems for application as an active channel layer of TFTs; it was easy to change the electrical properties of the i-ZnO thin films under external conditions. The variable electrical properties lead to unstable TFTs device characteristics under bias stress and/or temperature. In order to obtain higher performance and more stable ZnO-based TFTs, HZO thin film was used as an active channel layer. It was expected that HZO-TFTs would have more stable electrical characteristics under gate bias stress conditions because the binding energy of Hf-O is greater than that of Zn-O. For deposition of HZO thin films, Hf would be substituted with Zn, and then Hf could be suppressed to generate oxygen vacancies. In this study, the fabrication of the oxide-based TFTs with HZO active channel layer was reported with excellent stability. Application of HZO thin films as an active channel layer improved the TFT device performance and bias stability, as compared to i-ZnO TFTs. The excellent negative bias temperature stress (NBTS) stability of the device was analyzed using the HZO and i-ZnO TFTs transfer curves acquired at a high temperature (473 K).

• 한국정보통신학회논문지
• /
• 제20권5호
• /
• pp.992-997
• /
• 2016

본 논문에서는 단채널 비대칭 이중게이트 MOSFET의 상하단 산화막 두께비에 대한 터널링 전류의 변화에 대하여 분석하고자 한다. 채널길이가 5 nm까지 감소하면 차단전류에서 터널링 전류의 비율이 크게 증가하게 된다. 이와 같은 단채널효과는 상하단 게이트 산화막 구조를 달리 제작할 수 있는 비대칭 이중게이트 MOSFET에서도 발생하고 있다. 본 논문에서는 상하단 게이트 산화막 두께비 변화에 대하여 차단전류 중에 터널링 전류의 비율 변화를 채널길이, 채널두께, 도핑농도 및 상하단 게이트 전압을 파라미터로 계산함으로써 단채널에서 발생하는 터널링 전류의 영향을 관찰하고자 한다. 이를 위하여 포아송방정식으로부터 해석학적 전위분포를 구하였으며 WKB(Wentzel-Kramers-Brillouin)근사를 이용하여 터널링 전류를 구하였다. 결과적으로 단채널 비대칭 이중게이트 MOSFET에서는 상하단 산화막 두께비에 의하여 터널링 전류가 크게 변화하는 것을 알 수 있었다. 특히 채널길이, 채널두께, 도핑농도 및 상하단 게이트 전압 등의 파라미터에 따라 매우 큰 변화를 보이고 있었다.