• The Korean Journal of Pharmacology
• /
• v.14 no.1_2
• /
• pp.47-54
• /
• 1978

Recently, a major resection of the pancreas has been carried out not only to treat carcinoma of pancreas but also chronic pancreatitis. But limited and often contradictory reports have been made on the exocrine effects after partial surgical pancreatectomy in mammals. It was suggested that the growth of the residual tissue in pancreatectomized rat is very active, because pancreas has the great power of regeneration after partial pancreatectomy, while others observed that rat pancreas after partial surgical resection revealed a perplexing mixture of atrophy and regeneration of acinar tissue. On the other hand, another results showed that the amount of insulin required to control diabetes after partial resection of pancreas is much greater than that needed after total pancreatectomy. Because the anti-insulin system, such as glucagon secretion and hypophyseoadrenal function, is probably depressed after total pancreatectomy. Furthermore, minimal resection line which will not influence the normal function of pancreas is not agreeable, such 75%, 80% or 95% resection of the total pancreas in rat. So far, studies on the exocrine function other than endocrine function after partial pancreatectomy have been limited. Therefore, the main purpose of this study is to examine the changes of exocrine as well as endocrine function of pancreas at the different time interval after 60% or 80% pancreatectomy in rats. The results summerized as follow: 1) In both 60% and 80% resected groups, a slight decrease of the total body weight was observed at a day after partial pancreatectomy in rats, but the body weight was continued to increase for following 100 days. 2) The weight of residual pancreas was continuously increased during experiment in both 60% and 80% resected groups. But the content of tissue protein in residual pancreas was significantly decreased comparing with those of resected pancreas. 3) The flow rate of pancreatico-biliary juice was significantly decreased immediately after pancreatectomy in both resected groups. But it was recovered to control level after a day in 60% resected group, after 30 days in 80% resected group. 4) The output of amylase and lipase in resected groups were significantly decreased right after pancreatectomy comparing with control group. In the 60% resected group, the output of amylase was recovered during the following 100 days after pancreatectomy, while lipase output in 3 days. However, in the 80% resected group, the output of amylase and lipase were not recovered during 100 days after pancreatectomy. 5) In order to examine the endocrine function, blood sugar level were examined at all experimental periods after partial pancreatectomy. There was no difference between control and 60% resected group in the sugar level. But in the 80% resected group the level was significantly incresed immediately after pancreatectomy, and reached the highest level at 3 days. Then it was decreased to control level during the next 10 days after pancreatectomy. The above results showed that in 60% resected group little changes were observed on pancreatic function, but severe functional impairments were observed in 80% resected group. This results suggested that the endocrine function was recovered within a short period, although the exocrine function was not recovered for a long time after 80% pancreatectomy in rats.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 1998.11a
• /
• pp.0-0
• /
• 1998

-Part I- As market needs become more various, the production of smaller quantities of a wider variety of products becomes increasingly important. In addition, in order to meet demands for more efficient production, long-term unmanned factory operation is prevailing at a remarkable pace. Within this context, laser machines are gaining increasing popularity for use in applications such as cutting and welding metallic and ceramic materials. FANUC supplies four models of $CO_2$ laser oscillators with laser power ranging from 1.5㎾ to 6㎾ on an OEM basis to machine tool builders. However, FANUC has been requested to produce laser oscillators that allow more compact and lower-cost laser machines to be built. To meet such demands, FANUC has developed six models of Slab type YAG laser oscillators with output power ranging from 150W to 2㎾. These oscillators are designed mainly fur cutting and welding sheet metals. The oscillator has an exceptionally superior laser beam quality compared to conventional YAG laser oscillators, thus providing significantly improved machining capability. In addition, the laser beam of the oscillator can be efficiently transmitted through quartz optical fibers, enabling laser machines to be simplified and made more compact. This paper introduces the features of FANUC’s developed Slab type YAG laser oscillators and their applications. - Part II - All-solid-state lasers employing laser diodes (LD) as a source of pumping solid-state laser feature high efficiency, compactness, and high reliability. Thus, they are expected to provide a new generation of processing tools in various fields, especially in automobile and aircraft industries where great hopes are being placed on laser welding technology for steel plates and aluminum materials for which a significant growth in demand is expected. Also, in power plants, it is hoped that reliability and safety will be improved by using the laser welding technology. As in the above, the advent of high-power all-solid-state lasers may not only bring a great technological innovation to existing industry, but also create new industry. This is the background for this project, which has set its sights on the development of high-power, all-solid-state lasers with an average output of over 10㎾, an oscillation efficiency of over 20%, and a laser head volume of below 0.05㎥. FANUC Ltd. is responsible for the research and development of slab type lasers, and TOSHIBA Corp. far rod type lasers. By pumping slab type Nd: YAG crystal and by using quasi-continuous wave (QCW) type LD stacks, FANUC has already obtained an average output power of 1.7㎾, an optical conversion efficiency of 42%, and an electro-optical conversion efficiency of 16%. These conversion efficiencies are the best results the world has ever seen in the field of high-power all-solid-state lasers. TOSHIBA Corp. has also obtained an output power of 1.2㎾, an optical conversion efficiency of 30％, and an electro-optical conversion efficiency of 12%, by pumping the rod type Nd: YAG crystal by continuous wave (CW) type LD stacks. The laser power achieved by TOSHIBA Corp. is also a new world record in the field of rod type all-solid-state lasers. This report provides details of the above results and some information on future development plans.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.12
• /
• pp.1735-1740
• /
• 2005

Forty-two single-bearing and 42 twin-bearing mature Angus${\times}$Hereford cows were allocated, seven per cell to 3 replications of 2 stocking rates (3.2 cows/ha; medium stocking rate [MSR], and 3.8 cows/ha; high stocking rate [HSR]) to graze summer-active and winter-active pastures from late pregnancy to the weaning of their calves. Cow liveweights and growth of calves were recorded as well as estimates of pasture quantity and forage intake. Pasture quantity did not differ in the paddocks grazed by single- and twin-bearing cows during pregnancy, nor effectively did forage intake. Subsequently, intake was higher during mid-lactation especially with twin-rearing cows (25% higher than single-rearing cows at the MSR; 9% at the HSR). However, quantity of pasture decreased for twin-rearing cows and was less than that available to single-rearing cows as lactation progressed. Liveweights of twinrearing cows decreased by 16% from late pregnancy to weaning at the MSR, and by 14% at the HSR, compared to decreases of 1% for single-rearing cows. Twin calves were lighter at birth, had slower growth rates, and were lighter at weaning than single calves. In spite of weaning smaller calves twinning increased the output (kg of calf weaned) per cow and per ha, and increased the efficiency (kg calf weaned per unit of forage eaten by the cow) over single calf production by 46% at the MSR and by 58% at the HSR. Twinning also increased the marginal returns from investment in high input pastures required by the enterprise.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.4
• /
• pp.256-261
• /
• 2005

The experiment was conducted at the Ban­gabandhu Sheikh Mujibur Rahman Agricultural University, Gazipur to study the response of chickpea (Cicer arietinum L) to dual inoculation of Rhizobium and arbuscular mycorrhiza, poultry litter, nitrogen, and phosphorus on spore population and colonization, nodulation, growth, yield attributes, and yield. The performance of Rhizobium inoculant alone was superior to control in all the parameters of the crop studied. Among the treatments dual inoculation of Rhizobium and arbuscular mycorrhiza in presence of poultry litter performed best in recording number and dry weight of nodules, dry weight of shoots and roots, number of pods/plant, number of seeds/pod, and seed yields of chickpea. The highest seed yield of 3.96g/plant was obtained by inoculating chickpea plants with dual inoculation of Rhizobium and arbuscular mycorrhiza in association with poultry litter. Treatments receiving dual inoculation of Rhizobium and arbuscular mycorrhiza in presence of nitrogen and phosphorus, Rhizobium inoculant in presence of nitrogen and phosphorus, and that of arbuscular mycorrhiza in presence of nitrogen and phosphorus were similar as that of treatment receiving dual inoculation of Rhizobium and arbuscular mycorrhiza in presence of poultry litter. From the view point of nodulation, growth, yield attributes, and yields of chickpea, dual inoculation of Rhizobium inoculant and arbuscular mycorrhiza along with poultry litter was considered to be the balanced combination of nutrients for achieving the maximum output from cultivation of chickpea in Shallow Red Brown Terrace Soil of Bangladesh.

• The Journal of the Korea Contents Association
• /
• v.15 no.10
• /
• pp.468-480
• /
• 2015

The FTA between South Korea and China has been concluded in 2014. This means that there is high possibility of the economic integration in Northeast Asia. China's rapid growth has led the global economy, and the Northeast Asia has been attracting attention as the main market. Although the South Korean government cannot help continuing the overseas market-oriented policies, South Korea's construction orders in the Northeast Asia are insignificant, and their profitability is still low. It is time for South Korean construction industry to promote qualitative growth instead of quantitative growth. South Korean construction industry have to focus more on quality management to produce high-quality construction output. In order to support South Korean construction industry, Korean government needs to provide more advanced national quality management system. Therefore, this study compares national quality management systems in South Korea, Japan, and China, and suggests the direction of the South Korean national quality management system reform. In addition, another objective of this study is to confirm the importance of an ISO9001 based quality management system as a basis of the economic integration in Northeast Asia.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.3
• /
• pp.384-388
• /
• 2003

Twenty yearling lambs of Southeast Nigeria dwarf, liveweight ($18{\pm}1.9 kg$) were grouped into 5 treatments. Dry brewer's grain was substituted for maize offal in the experiment diets namely A to E at 0%, 15%, 30%, 45% and 60% respectively, as supplement to low quality, dry season cassava leaf top and Andropogan gayanus hay at 1:1 ratio that lasted for 56 days. After which 5 of the lambs (average bodyweight=$24.3{\pm}1.5kg$) were transferred to metabolism crates to determine the digestibility and nitrogen/protein balance studies. While the mean group intakes were (945.9, 996.1, 1,040.5, 1,148.5 and 1,037.7 g conc. DM/day), the growth rates were (115.1, 124.1, 152.5, 168.5 and 123.1 g liveweight gain/day), respectively. There was a recorded decline in both intake (p>0.05) and growth rate (p<0.05) as the level of dry brewer's grain was increased beyond 45% of the supplement. Similar trend was observed on the protein and organic matter efficiency ratios (p>0.05) together with the organic matter intake. The urine nitrogen output was also significant (p>0.05). The work further revealed that, at a certain critical level of intake, dry brewer's grain is able to support growth rates measurable to or better than those noted when feeding maize offal to lambs, and went on to prove dry brewer's grain as an attractive supplementary feed for the drier months of the year, in the Southeast of Nigeria.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.399-404
• /
• 2015

The cost of fuel in ships has recently increased due to a rapid increase in international oil prices and international restrictions regarding the greenhouse effect generated from the burning of fuel. Therefore, different methods for changing the hull designs for improving energy efficiency, developing coating for reducing friction resistances, developing additives for improving engine thermal efficiency, and low-speed operation for reducing fuel consumption have been considered. The developments of high-speed, large-scale, and energy-saving vessels are deemed essential to adapt to the recent high oil price era. Therefore, it is important to analyze Precisely the qualitative and quantitative changes in the resistance value of the local areas of the hull surface. In this study, the engine performance before and after docking was analyzed to examine friction resistance caused by marine growth on the hull as a basic study for improving the energy efficiency. The result was then presented by comparing it with the previous data for 2.5 years between docks to investigate the performance of the main engine, the change in friction resistances and loads, the fuel consumption and ship speed.

• Korea Trade Review
• /
• v.41 no.5
• /
• pp.353-371
• /
• 2016

The purpose of this paper is to examine the structural change of Korean manufacturing industries and the differences of total factor productivity(TFP) between exporting industries and import substituting industries in Korean manufacturing industry from 1980 to 2013. The empirical results show that over half of total 13 industries have experienced changes of direction from import to export or export to import, which implies that there was a considerable structural change in Korean manufacturing industry. The output growth rates are higher in exporting industries than in import substituting industries. All industries employ more capital than labor during the period, which means that production methodology in Korean industries changes to a more capital intensive one. Finally, the growth rate of total factor productivity is higher in exporting industries than in import substituting industries, and it is also proved in panel regression analysis.

• KDI Journal of Economic Policy
• /
• v.12 no.1
• /
• pp.3-29
• /
• 1990

Korean input-output tables for 1975 and 1985 are first deflated into 1975 constant domestic prices(hypothetical terms), and the constant price I-O data are used to decompose the sources of industrial growth and structural change during the 1975-85 period. Using the same methodology, our results for the 1975-85 period are then linked to the results for the earlier period(1955-75) in order to analyze and evaluate the "demand-side" sources of industrialization over the past three decades. The results from the decomposition of the whole economy indicate that over three decades(1955-85) the relative contribution of domestic demand expansion (DDE) to growth and structural change has continuously declined while the contribution of export expansion(EE) has generally continued to rise. The contribution of import-substitution(IS) which had been significantly higher than that of EE during 1955-63 declined substantially, remaining at an insignificantly low level during the period following 1963. Although it is well known that the government's industrial policy in the 1970s emphasized import-substitution in heavy and chemical industries, no significant changes in the export-oriented growth pattern could be observed even for that period, except for a minor decline in the relative contribution of EE. This may be attributed to the substantially larger, backward-linkage effects of EE than that of IS. The sources-of-growth decompositions for major branches of the manufacturing sector generally support the major conclusions derived from the decomposition for the whole economy. The IS contribution which had been significantly high in almost all manufacturing branches during the 1955-63 period declined to low levels in all but two branches, heavy industry and machinery, during the following period. On the other hand, the relative contribution of EE showed a continuous rise in almost all manufacturing branches(except food processing). Finally, the sources of growth for 1975-85 which were decomposed by detailed sub branches, are analyzed by correlating them with changes in relative prices and industrial protection rates by sub-branches for the same period. A major result is that contrary to general expectations, the EE contributions by sub-branch are not negatively correlated with the nominal rates of protection and/or the effective rates of protection for the same sub-branches. It is also found that no statistically significant, positive correlation exists between IS contributions and nominal protection rates or effective protection rates. These unexpected results may be explained by the peculiar nature of the Korean system of industrial incentives for the past period.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.1
• /
• pp.25-35
• /
• 2004

We achieved a Quantitative economic growth through rapid developed in 1970' and 1980'. It was confronted after IMF crisis that we needed to improve the past economic policy and the industrial structure. In line of that, the problem of the industrial structure like huge accidents of 1990' converted the recognition of safety. And to improve the conversion, the research of a safety management was needed. In this paper, we thought 4M1E(Man, Machine, Method, Material, Environment) as the cause of accident using the principal of process, assuming that output is accident. Applying 4M1E to the structure of QFD(Quality Function Deployment), we propose the safety function deployment, which has the flow line as followed; demand safety, safety characteristic, direct cause, 4M1E and safety management.