• Journal of Korean Society of Rural Planning
• /
• v.21 no.2
• /
• pp.23-32
• /
• 2015

The objective of this study is to analyze how much economic impact is changed before and after the designation as biosphere reserve area by tourism. The subject region of this study is Hajun mud village which is the famous place to experience eco-tourism located in Gochang-gun. This region has been designated as a UNESCO biosphere reserve in 2013. In order to estimate the regional economic effects, we employ a regional input-output model which is derived by a RAS method. Using regional input-output model analysis, this study estimates direct and indirect effects of tourist's expenditure on experience of Hajun mud village in Gochang-gun across associated industries between 2011 and 2013. Also, we tried to calculate a net increase in number of visitors in 2013 with considering the trend of tourist in this region and estimate a net regional economic effect after the designation as a biosphere reserve area by tourism. The empirical result could be summarized as follows : (1) the change of production inducement effect shows that regional outputs is approximately increased by 386 million won between 2011 and 2013, (2) regional value-added is increased by 223 million won during the same period, (3) regional employment is approximately increased by 20 according to the labor inducement effects of expanding tourist's expenditure in biosphere reserve area. (4) social service industry has highly been benefited by increase in experience tourist after Gochang-gun was designated as the biosphere reserve area. (5) estimated net increase in number of visitors after the designation as biosphere reserve area is about 37,364 which is 93.4% of the absolute increase in number of visitors amounting 40,011 between 2011 and 2013.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2014

In this paper, we propose a CPLD low power algorithm considering the structure. The proposed algorithm is implemented CPLD circuit FC(Feasible Cluster) for generating a problem occurs when the node being split to overcome the area and power consumption can reduce the algorithm. CPLD to configure and limitations of the LE is that the number of OR-terms. FC consists of an OR node is divided into mainly as a way to reduce the power consumption with the highest number of output nodes is divided into a top priority. The highest number of output nodes with the highest number of switching nodes become a cut-point. Division of the node is the number of OR-terms of the number of OR-terms LE is greater than adding the input and output of the inverter converts the AND. Reduce the level, power consumption and area. The proposed algorithm to MCNC logic circuits by applying a synthetic benchmark experimental results of 13% compared to the number of logical blocks decreased. 8% of the power consumption results in a reduced efficiency of the algorithm represented been demonstrated.

• Journal of the Korean Institute of Rural Architecture
• /
• v.23 no.2
• /
• pp.9-16
• /
• 2021

The purpose of this study is to maintain the existing characteristics of the city by utilizing the physical decline status and floating population in small and medium cities residential areas. In addition, it intends to present the direction of flexible urban regeneration and maintenance by reflecting regional characteristics and current status. A total of three data were used in this study. Building data, floating population data, and census output area data were used. Building data and floating population data were classified into five classes. The graded data were joined to the census output area data and analyzed by overlapping the two data. As a result of analysis of 17 residential areas in 5 small and medium cities in Jeollanam-do, 4 types, 2 management models, and 4 indicators could be presented by grade and regional characteristics. This study is meaningful in that it is possible to plan regionally customized urban regeneration/maintenance management plans and projects through the typology of the current status and characteristics of the region, which is an important step in the bottom-up form.

• The Journal of Korean Physical Therapy
• /
• v.23 no.3
• /
• pp.37-42
• /
• 2011

Purpose: The principal objective of this study was to evaluate the power output of ultrasound in Korean clinics and compare the value with Korean and global standards. Methods: A total of 69 units were measured for ultrasound power output. The normal range of power output level was ${\pm}30%$ of the output set according to KFDA standards. Device model, manufacturer, ERA, and BNR were obtained via simple questionnaires. A portable ultrasound power meter was used for output measurement. Results: 37 machines, with reported ERA values, were assessed for power output per unit area. Of these machines, 13 (37.14%) were considered to be compliant with US FDA standards at 0.5, 1.0, 1.5, $20W/cm^2$ and 18 (51.43%) were considered within KFDA standards. The remainder of the machines were outside the standard error and evidenced irregular output levels, even though most of them were the same model. Conclusion: Appropriate ultrasound intensity is incredibly important for safety and effective use. Therefore, the KFDA standards regarding ultrasound may require revision in light of global standards, including BNR and ERA additionally, attention should be paid to regular calibration for safe use in clinical practice.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.679-680
• /
• 2008

Most of the small wind turbines are set as the stand alone type in the area where the access to the grid is difficult and compulsorily uses the battery. Depending on the volume of the battery, securing of the space necessary, and has the shortcoming of replacing the battery periodically due to it's limited working life span. Recently, setting up in the vicinity of the city area is increasing and the trend of using the Grid inverter instead of battery is also increasing. This thesis is aiming mainly analyzing the characteristics of the output power of the Prototype Permanent Magnet Generator(PMG) and the Grid-Inverter and to verify through the theoretical study and tests. Tested the characteristics of the output power of the PMG through the stage 1-2 and at the stage 3 connected the output of the PMG to the Inverter and tested the characteristics of the Inverter. And at the stage 4, the maximum output power is confirmed by the continuous running test of the PMG.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.10
• /
• pp.802-808
• /
• 2014

The purpose of this study is to suggest efficient methods for estimating population exposed to noises by analyzing differences of population exposed to noises estimated by each method through comparing exposed population estimated by utilizing existing methods and those estimated by using census output areas reflecting the actual population information of each address. For population exposed to noises, the error of exposed population estimated by using the per capita living space turned out to be the biggest, and other estimation methods had no significant difference. For population exposed to excess noises, as a result of analyzing population estimated by each method based on census output areas, the error of the method using a grid noise map turned out to be the biggest. For the method to estimate population exposed to noises by using a noise map, the estimation methods using census output areas and total ground area are considered to be more rational than the grid noise map estimation method or the method to estimate the living space per capita.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.1
• /
• pp.70-82
• /
• 2014

A nano-power CMOS voltage reference is proposed in this paper. Through a combination of switched-capacitor technology with the body effect in MOSFETs, the output voltage is defined as the difference between two gate-source voltages using only a single PMOS transistor operated in the subthreshold region, which has low sensitivity to the temperature and supply voltage. A low output, which breaks the threshold restriction, is produced without any subdivision of the components, and flexible trimming capability can be achieved with a composite transistor, such that the chip area is saved. The chip is implemented in $0.18{\mu}m$ standard CMOS technology. Measurements show that the output voltage is approximately 123.3 mV, the temperature coefficient is $17.6ppm/^{\circ}C$, and the line sensitivity is 0.15 %/V. When the supply voltage is 1 V, the supply current is less than 90 nA at room temperature. The area occupation is approximately $0.03mm^2$.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.7 no.1
• /
• pp.36-42
• /
• 2007

A low-power compact driver for multistandard physical layer is presented. The proposed driver achieves low power and small area through the voltage-mode driver with trans-impedance configuration and the novel hybrid driver,. In the voltage-mode driver, a trans-impedance configuration alleviates the problem of limited common-mode range of error amplifiers and the area and power overhead due to pre-amplifier. For a standard with extended output swing, only current sources are added in parallel with the voltage-mode driver, which is named a 'hybrid driver'. The hybrid architecture not only increases output swing but reduces overall driver area. The overall driver occupies $0.14mm^2$. Power consumptions under 3.3-V supply are 24.5 mW for the voltage-mode driver and 44.5 mW for the hybrid driver.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2234-2236
• /
• 2002

In this paper, realized an automation system that applies the automobile electromotive mirror using CAN(Controller Area Network : ISO l1898). CAN is being used mainly in ECUs (Electronic Control Units) connection of control system or automobile inside. And it has high reliability in the various network protocol. To be realized position system, Automobile Electro mirror, has a strong point that estabilishment e decrease and ease of maintenance it compare PPP(Point-to-point) method of existed. The realization composed of three portions. One Input Slave Con which accept a user's input, another Output Slave Co which drove it makes the motor of electromotive mirr other Master Controller which interfacing the two Controller. Automobile electromotive mirror realized time system that will be able to minize the delay t point of time user's input until output point of time mirror.

• Solar Energy
• /
• v.5 no.2
• /
• pp.20-27
• /
• 1985

The aims of this study is to examine closely the temperature distribution of the solar pond for conditions of Seoul area climate and to prove capability of the solar pond utilization in Seoul area. In this study the equations for the convecting zone temperature of the solar pond were derived from Rabl and Nielsen's model. As the result of computer simulation, it was found that the average temperature of convecting zone is over $100^{\circ}C$ under conditions which is no output and 120cm depth or over of the insulating layer. Consequently if solar pond is constructed in Seoul area, it is a effective heat storage system.