• 한국해양학회지:바다
• /
• 제16권3호
• /
• pp.125-138
• /
• 2011

본 연구는 부산항 주변 저서생태계의 상태를 파악하기 위해 수행되었으며, 이를 위해 저서다모류군집의 시 공간 분포 패턴과 저서환경요인에 대한 조사를 실시하였다. 현장 조사는 북항, 남항 그리고 감천항 내 외측에 선정된 15개 정점에서 2007년 2월부터 12월 사이에 계절별로 진행되었다. 부산항 주변 저서환경요인 중 수온, 염분, 퇴적물 특성 등은 전반적으로 균일한 특성을 보였으나, 총유기탄소(TOC), 산휘발성황화물(AVS), coprostanol과 같은 유기물 함량 및 오염과 관련된 변수들은 부산항의 내 외측에서 뚜렷한 차이를 보였다. 저서다모류군집의 총 종수는 96종, 평균 개체밀도는 1,814 개체/$m^2$ 이었으며, 출현종수는 대체로 외측에서, 개체밀도는 내측에서 높았다. 주요 우점종은 Aphelochaeta monilaris, Magelona japonica, Pseudopolydora paucibranchiata 등으로 다수의 유기물 오염지 표종들이 포함되어 있었다. 다변량분석 결과, 전체 군집은 부산항의 내측군집과 외측군집으로 구분되었으며, 계절성은 큰 영향을 마치지 못하였다. 전체군집구조와 가장 밀접한 상관성을 보인 환경요인은 coprostanol과 산휘발성황화물이었다. 생불과 환경 두 가지 측면 모두에서 부산항 내측의 유기물 오염이 의심되었으며, 그러한 현상은 북항 내측에서 특히 뚜렷하였다.

• 한국지반공학회지:지반
• /
• 제12권2호
• /
• pp.71-84
• /
• 1996

본 연구에서는 여러가지의 타설경사각을 갖는 모형 그물식 뿌리말뚝을 제작하여 모형토조에 설치하고 레이닝(raining)방법으로 지반을 조성한 다음 압축시험 및 인발시험을 하여 그물식 뿌리말뚝의 타설경사각과 하중지지력 사이의 관계를 비교분석 하였다. 모형말뚝은 0$^{\circ}$, 5$^{\circ}$, $10^{\circ}$, 15$^{\circ}$, 20$^{\circ}$, 그리고 25$^{\circ}$의 타설경사각을 갖는 직경 Sulm의 강봉에 모래를 입힌 것으로 직경이 6.5muL 길이가 300mm가 되도록 하였다. 모형 뿌리말뚝의 배치는 동일한 타설경사각을 갖는 8개의 모형 말뚝을 4개씩 2개의 크고 작은 동심원에 접하도록 하였다. 그리고 모형 원형 얕은 기초를 제작하여 압축시험을 수행한 다음 지지력을 구하여 뿌리말뚝의 지지력과 비교하였다. 압축시험 및 인발시험 결과를 회귀분석하면 하중지지능력이 최대가 되는 타설경사각은 대략 12$^{\circ}$~13$^{\circ}$사이이다. 최적 타설경사각에서의 뿌리말뚝의 압축지지력은 원형 얕은기초의 지지력과 비교하면 약 2.0배이고, 연직으로 타설된 뿌리말뚝의 경우와 비교하면 13%의 지지력 증대효과가 있다. 그리고 최적타설경사각에서의 뿌리말뚝의 인발저항력은 연직으로 타설된 뿌리말뚝의 경우 에 비해 21%의 인발저항력 증대효과가 있다. 압축시험으로부터 얻은 하중-침하량곡선은 타설 경사각이 없는 경우에 전반전단파괴 형태를 나타내며,타설경사각이 5$^{\circ}$, $10^{\circ}$인 경우, 하중은 극한 지지력에 도달한 후 일정한 값을 유지하는 양상을 보인다. 타설경사각이 15$^{\circ}$, 20$^{\circ}$, 25$^{\circ}$로 증가하면서 하중은 극한지지력에 도달한 후에도 계속 증가하는 경향이 있다. 따라서, 타설경사각이 있는 경우의 뿌리말뚝은 압축지지력을 초과하여 하중을 받더라도 급격한 파괴에 이르지 않고 점차로 변위가 증가하는 연성 (ductile)거동을 보일 것으로 예상된다.

• 한국지반공학회논문집
• /
• 제34권9호
• /
• pp.33-42
• /
• 2018

야지궤도차량 구동 시 무한궤도를 통해 전달된 엔진출력은 지반-궤도 접지면에서 지반을 전단시켜 슬립변위 및 지반추력을 발현시킨다. 이때 지반추력의 반력이 야지궤도차량의 구동력으로 작용하는데, 지반이 연약하여 구동에 필요한 지반추력을 확보하기 어려운 경우에는 무한궤도 표면에 그라우저를 부착하여 구동성능을 개선시킨다. 본 연구는 그라우저 효과를 적절히 고려하여 야지궤도차량의 지반추력을 평가하기 위한 기초연구로서 수행되었다. 우선 지반-궤도 접지면의 전단메커니즘을 바탕으로 그라우저가 부착된 야지궤도차량의 지반추력을 평가하기 위한 방법을 새로이 제안하였다. 이를 통해 그라우저가 야지궤도차량의 구동성능에 미치는 영향을 평가한 결과, 그라우저가 부착됨에 따라 야지궤도차량의 전체지반추력이 증가하여 구동성능이 개선되는 것을 확인하였다. 특히, 그라우저의 길이가 증가하고 간격이 가까울수록 전체지반추력 증가효과가 명확해지는 것으로 나타나, 그라우저 형상비(=간격/길이)가 작을수록 야지궤도차량의 구동성능을 더욱 크게 개선시킬 수 있을 것이라 판단된다.

• 한국의학물리학회지:의학물리
• /
• 제29권2호
• /
• pp.59-65
• /
• 2018

This paper describes the clinical use of the dose verification of multileaf collimator (MLC)-based CyberKnife plans by combining the Octavius 1000SRS detector and water-equivalent RW3 slab phantom. The slab phantom consists of 14 plates, each with a thickness of 10 mm. One plate was modified to support tracking by inserting 14 custom-made fiducials on surface holes positioned at the outer region of $10{\times}10cm^2$. The fiducial-inserted plate was placed on the 1000SRS detector and three plates were additionally stacked up to build the reference depth. Below the detector, 10 plates were placed to avoid longer delivery times caused by proximity detection program alerts. The cross-calibration factor prior to phantom delivery was obtained by performing with 200 monitor units (MU) on the field size of $95{\times}92.5mm^2$. After irradiation, the measured dose distribution of the coronal plane was compared with the dose distribution calculated by the MultiPlan treatment planning system. The results were assessed by comparing the absolute dose at the center point of 1000SRS and the 3-D Gamma (${\gamma}$) index using 220 patient-specific quality assurance (QA). The discrepancy between measured and calculated doses at the center point of 1000SRS detector ranged from -3.9% to 8.2%. In the dosimetric comparison using 3-D ${\gamma}$-function (3%/3 mm criteria), the mean passing rates with ${\gamma}$-parameter ${\leq}1$ were $97.4%{\pm}2.4%$. The combination of the 1000SRS detector and RW3 slab phantom can be utilized for dosimetry validation of patient-specific QA in the CyberKnife MLC system, which made it possible to measure absolute dose distributions regardless of tracking mode.

• 한국산림과학회지
• /
• 제86권3호
• /
• pp.288-300
• /
• 1997

우리나라에 자생(自生)하고 있는 옻나무속(屬) 6종(種)과 외래종(外來種) 2종(種)에 대(對)한 화서(花序)의 형태(形態)와 과실(果實)과 종자(種子)의 형태(形態) 및 해부학적(解剖學的) 형질(形質)들을 광학현미경(光學顯微鏡)과 주사전자현미경(走査電磁顯微鏡)을 통해 관찰(觀察)한 결과(結果), 화서(花序)의 형태(形態)는 미국털옻나무가 정생(頂生)하고 직립(直立)하는 밀추화서(密錐花序)인 반면 붉나무는 밀추화서(密錐花序)와 유사한 원추화서(圓錐花序)였으며, 다른 수종(樹種)들은 액생(腋生)하고 드리워진 원추화서(圓錐花序)였다. 과실(果實)과 종자(種子)의 해부학적(解剖學的) 연구결과(硏究結果) 붉나무와 미국털옻나무는 외과피(外果皮)와 중과피(中果皮)가 완전(完全)히 분리(分離)되어 있지 않은 반면, 다른 수종(樹種)들은 모두 내외피(內果皮)가 3개(個)의 lignified cell layer와 crystal layer로 이루져 있었다. 또한 종피(種皮)의 외부(外部) 미세구조(微細構造)도 종(種)에 따라 고유(固有)한 특징(特徵)을 지니고 있어 종간(種間)의 식별(識別)과 분류(分類)가 가능(可能)하였다. 과실(果實)과 종자(種子)의 형태(形態) 및 해부학적(解剖學的) 형질(形質)에 의한 유집분석(類集分析) 결과(結果) 개옻나무-붉나무-덩굴옻나무류집군(類集群)과 옻나무-산검양옻나무-검양옻나무류집군(類集群)으로 분류(分類)되었다. 이들중 17개(個)의 기본 형질(形質)에 대(對)한 주성분(主成分) 분석결과(分析結果) Eigenvalue 1.0 이상(以上)이 3개(個)의 주성분군(主成分群)으로 분리(分離)되었으며, 제(第)2 주성분(主成分)까지의 누적기여율(累積寄與率)은 89.47%로 높은 설명력(說明力)을 보였고, 종자(種子)의 길이, 과실(果實)의 길이, 종자(種子)의 폭(幅), 종자(種子)의 무게, 과실(果實)의 폭순(幅順)으로 높은 기여도(寄與度)를 보였다. 화서(花序)와 종실(種實)의 외부(外部) 형태적(形態的), 해부학적(解剖學的) 특징(特徵)을 종합(綜合)하여 종간(種間)의 검색표(檢索表)를 제시하였다.

• 미술이론과 현장
• /
• 제7호
• /
• pp.165-188
• /
• 2009

In the development of linear perspective, Brook Taylor's theory has achieved a special position. With his method described in Linear Perspective(1715) and New Principles of Linear Perspective(1719), the subject of linear perspective became a generalized and abstract theory rather than a practical method for painters. He is known to be the first who used the term 'vanishing point'. Although a similar concept has been used form the early stage of Renaissance linear perspective, he developed a new method of British perspective technique of measure points based on the concept of 'vanishing points'. In the 15th and 16th century linear perspective, pictorial space is considered as independent space detached from the outer world. Albertian method of linear perspective is to construct a pavement on the picture in accordance with the centric point where the centric ray of the visual pyramid strikes the picture plane. Comparison to this traditional method, Taylor established the concent of a vanishing point (and a vanishing line), namely, the point (and the line) where a line (and a plane) through the eye point parallel to the considered line (and the plane) meets the picture plane. In the traditional situation like in Albertian method, the picture plane was assumed to be vertical and the center of the picture usually corresponded with the vanishing point. On the other hand, Taylor emphasized the role of vanishing points, and as a result, his method entered the domain of projective geometry rather than Euclidean geometry. For Taylor's theory was highly abstract and difficult to apply for the practitioners, there appeared many perspective treatises based on his theory in England since 1740s. Joshua Kirby's Dr. Brook Taylor's Method of Perspective Made Easy, Both in Theory and Practice(1754) was one of the most popular treatises among these posterior writings. As a well-known painter of the 18th century English society and perspective professor of the St. Martin's Lane Academy, Kirby tried to bridge the gap between the practice of the artists and the mathematical theory of Taylor. Trying to ease the common readers into Taylor's method, Kirby somehow abbreviated and even omitted several crucial parts of Taylor's ideas, especially concerning to the inverse problems of perspective projection. Taylor's theory and Kirby's handbook reveal us that the development of linear perspective in European society entered a transitional phase in the 18th century. In the European tradition, linear perspective means a representational system to indicated the three-dimensional nature of space and the image of objects on the two-dimensional surface, using the central projection method. However, Taylor and following scholars converted linear perspective as a complete mathematical and abstract theory. Such a development was also due to concern and interest of contemporary artists toward new visions of infinite space and kaleidoscopic phenomena of visual perception.

• Ocean and Polar Research
• /
• 제32권4호
• /
• pp.449-462
• /
• 2010

Ongoing port baseline surveys are essential for developing ballast water management procedures in order to control unwanted or potentially risky species. Seasonal distributional patterns of marine dinoflagellate Noctiluca scintillans internationally recognized as harmful species and the related environmental factors were surveyed at Incheon, Gwangyang and Ulsan seaports in Korea from 2007 to 2009. The above three seaports were chosen because of their status as the busiest in Korea and characterized by their different bioregions. Average temperature ranged from $2.08^{\circ}C$ in winter to $26.39^{\circ}C$ in summer at Incheon, $7.22^{\circ}C$ in winter to $25.77^{\circ}C$ in summer at Gwangyang, and $11.59^{\circ}C$ in winter to $21.67^{\circ}C$ in summer at Ulsan during the study period. Average salinity varied from 26.88 in winter to 31.25 in summer at Incheon, 22.83 in winter to 33.41 in summer at Gwangyang, and 30.04 in winter to 33.90 in summer at Ulsan. Noctiluca scintillans appeared consistently at all ports during the study period, indicating its eurythermal and euryhaline nature. The highest abundances (21,813 to 41,753 $inds{\cdot}m^{-3}$) of N. scintillans were observed in May 2008 and 2009 at the outer stations of Incheon port. Abundances of between 10,000 and 30,000 $inds{\cdot}m^{-3}$ were only observed at the innermost station of Ulsan in May, while abundances of between 10,000 and 40,000 $inds{\cdot}m^{-3}$ were frequently observed throughout all stations at Gwangyang during the study period, coinciding with consistently high concentration of chlorophyll-a (hereafter chl-a) ($4.32-8.24\;{\mu}g\;l^{-1}$) compared to other ports. Spatio-temporal variation of chl-a concentration was not significantly correlated with abundances of N. scintillans (p>0.01). However, relatively high chl-a concentrations were consistently recorded along with high abundances of N. scintillans throughout all stations at Gwangyang compared to other ports. Abundances of N. scintillans observed at the three surveyed ports did not significantly (p>0.01) affect the concentration of dissolved oxygen in the surface mixed layer, indicating that the species abundances were not enough to cause reduction of dissolved oxygen during the study period. Presented results indicated that the Gwangyang seaport may provide the most suitable environment for a wide range of N. scintillans blooming compared to other ports.

• 한국수산과학회지
• /
• 제30권5호
• /
• pp.882-895
• /
• 1997

본 연구는 시화방조제 건설로 인하여 외해수와의 순환이 차단된 후 유기물오염과 담수화가 진행된 시화호 내에서 방조제 완공 전과 후의 저서동물 군집을 비교함으로써 시화호 내에서 저서동물군집이 어떤 천이과정을 거쳤는지, 그리고 군집의 천이를 일으킨 주된 요인은 무었인지, 또한 방조제 건설 전의 시화지구 해역 저서동물 군집과 건설 후 방조제 외곽해역의 저서동물 군집을 비교함으로써 방조제 건설이 주변 해역에 미친 영향을 파악하는데 그 목적이 있다. 방조제 완공 후 시화호 내에서의 저서동물 군집의 천이는 두 방향으로 진행되었다. 첫번째는 유기물 유입의 증가에 따른 저층수의 무산소 및 빈산소 환경의 형성으로 인해 저서동물이 완전히 사라진 중오염역 (Grossly Polluted Zone)의 출현이다. 두번째는 저서동물 군집이 계속 유지되고 있는 방조제 근처의 낮은 수심에서의 기회종으로 구성된 오염역 (Polluted Zone)으로의 저서동물 군집의 천이이다. 이런 군집의 천이는 방조제의 배수갑문을 통한 빈번한 해수 유입으로 인하여 저층수의 염분도와 용존산소량의 변화에 크게 영향을 받는 것으로 나타났다. 또한 시화방조제 건설은 주변 외곽지역의 저서동물 군집에도 영향을 미쳐 건설 전보다 후에 평균 출현종수는 2.6배, 밀도는 7배나 증가하는 전형적인 부영양화의 특징적 현상을 보임으로서 방조제 외곽해역의 저서동물 군집 또한 불안정한 상태로 변하고 있음을 알 수 있다.

• 한국염색가공학회지
• /
• 제18권1호
• /
• pp.33-43
• /
• 2006

The purpose of this study was to eximine the effect of different yam twisting methods on mechanical properties and 3D CAD images of plain knitted fabrics made of composite yarns. Six yams were used in this study: four different composite yams of the six consist of acetate and functional polyester (Poly-m) with the ratio of 70:30, and the rest two are the original acetate $100\%$ yam and the poly-m $100\%$ yarn. The four kinds of composite yarns were processed in combinations of twisting processes such as interlacing, false twisting, two for one twisting, combined twisting and single covering, and the two original yams were knitted without any twisting process. Sixteen mechanical properties of all the six knitted fabrics, knitted under the same knitting conditions, were measured by KES-FB system with the outer knit condition. The results were as follows; 1) When the sample applied with the false twisting process at the temperature as high as $220^{\circ}C$, ENT, B, HB, G and RC values of samples increased which leads to increasing dimensional stability. 2) To gain the high bending and shear properties in the single covering process, selecting the core yarn with such properties is the most important factor. 3) Interlacing process effected to increase RC value. 4) False twisting process after interlacing process gave bulkiness and un-interlaced part in yam was increased SMD value. The SMD value of the kilted fabric of the composite yarn, which was put through the combined twist process, was higher than those of which simple process such as the two for one twist or the single covering process applied. In order to achieve the silk-like surface feel of knitted fabric, the sin91e covering process is recommended. 5) Examining the simulation images of the knifed fabrics of composite yarn, which were generated by the 3D CAD system based on the mechanical properties of the fabric, led that appearance could be changed as different twisting methods were applied.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.835-841
• /
• 2013

Modern solid-state gyroscopes (HRG) with hemispherical resonators from high-purity quartz glass and special surface superfinishing and ultrathin gold coating become the best instruments for precise-grade inertial reference units (IRU) targeting long-term space missions. Designing of these sensors could be a notable contribution into development of Korea as a space nation. In participial, 40mm diameter thin-shell resonator from high-purity fused quartz, fabricated as a single-piece with its supporting stem has been designed, machined, etched, tuned, tested, and delivered by STM Co. (ATS of Ukraine) several years ago; an extremely-high Q-factor (upto 10~20 millions) has been shown. Understanding of the best way how to match such a unique sensor with inner glass assembly of the gyro means how to use the high potential in a maximal extent; and this has become the urgent task. Inner quartz glass assembly has a very thin indium (In) layer soldered the resonator and its silica base (case), but effects of internal resonances between operational modal pair of the shell-cup and its side (parasitic) modes can notable degrade the potential of the sensor as a whole, instead of so low level of resonator's intrinsic losses. Unfortunately, there are special combinations of dimensions of the parts (so-called, "resonant sizes"), when intensive losses of energy occurs. The authors proposed to use the length of stem's fixture as an additional design parameter to avoid such cases. So-called, a cyclic scheme of finite element method (FEM) and ANSYS software were employed to estimate different combinations of gyro assembly parameters. This variant has no mismatches of numerical origin due to FEM's discrete mesh. The optimum length and dangerous "resonant lengths" have been found. The special attention has been paid to analyses of 3D effects in a cup-stem transient zone, including determination of a difference between the positions of geometrical Pole of the resonant hemisphere and of its "dynamical Pole", i.e., its real zone of oscillation node. Boundary effects between the shell (cup) and 3D short "beams" (inner and outer stems) have been ranged. The results of the numerical experiments have been compared with the classic model of a quasi-hemispherical shell band with inextensional midsurface, and the solution using Rayleigh's functions of the $1^{st}$ and $2^{nd}$ kinds. To guarantee the truth of the recommended sizes to a designer of the real device, the analytical and FEM results have been compared with experimental data for a party of real resonators. The consistency of the results obtained by different means has been shown with errors less than 5%. The results notably differ from the data published earlier by different researchers.