• Title/Summary/Keyword: Original material

Search Result 888, Processing Time 0.026 seconds

Pickling of oxidized 304 Stainless Steel using Waste Acids from Etching Process of Silicon Wafer (실리콘 웨이퍼 에칭공정으로부터 발생(發生)된 폐산(廢酸)을 이용(利用)한 스테인리스 스틸의 산세거동(酸洗擧動) 연구(硏究))

  • Kim, Min-Seuk;Ahn, Jong-Gwan;Kim, Hong-In;Kim, Ju-Yup;Ahn, Jae-Woo
    • Resources Recycling
    • /
    • v.17 no.2
    • /
    • pp.36-45
    • /
    • 2008
  • Pickling of oxidized 304 stainless steel has been investigated using rotating disk electrode in waste acid solutions generated from the etching process of silicon wafer in order to recycle them. The waste acid solution contained acetic, nitric, hydrofluoric acids, and silicon of $19.6g/L^{-1}$. Electrochemical behavior during the pickling was distinctively different between the original and silicon-removed acid solutions. Open circuit potential was continuously changed in the original solution, while it was discontinuously changed and fluctuated in the silicon-removed solution. Fast and abrupt removal of surface oxide layer with severe pitting was observed in the silicon-removed solution. It was found that solution temperature had the most influential effect on glossiness. Surface glossiness after pickling was decreased with solution temperature. At the same condition, the glossiness was higher in the original solution than in the silicon-removed solution.

Photoinduced Alignment Based on the Blend of Poly(vinyl cinnamate) and Oligomeric Cinnamate via Linear Polarized UV Irradiation onto Groove Patterned Surface (폴리(비닐 신나메이트)와 을리고머 신나메이트 블렌드를 기반으로 한 그루브 패턴 표면의 광배향막)

  • Sung, Shi-Joon;Kim, Mi-Ri;Ahn, Do-Won;Kim, Dae-Hwan;Kang, Jin-Kyu;Park, Jung-Ki;Cho, Kuk-Young
    • Polymer(Korea)
    • /
    • v.34 no.1
    • /
    • pp.32-37
    • /
    • 2010
  • Photo-alignment property of groove patterned surface prepared from blend of poly (vinyl cinnamate) (PVCi) and oligomeric dicinnamate was investigated for the application for alignment layer of liquid crystal display. The study of the photoreaction kinetics using UV-vis spectrum with the irradiation time showed that the reaction rate of oligomeric cinnamate was enhanced compared to that of PVCi. Blend where PVCi was main component showed a slight improvement on the photoreaction rate. It was unable to obtain groove patterned surface only using oligomeric cinnamate itself owing to the high crystalline character. However, blending of PVCi made it possible to obtain clear surface pattern. Molecular orientation could be confirmed from the polar plot data. It can be suggested that blend of oligomeric cinnamate and polymeric cinnamate is promising material for the photoalignment layer.

Hetzer Technique for Surgical Correction of Ebstein's Anomaly (Hetzer 술기를 이용한 엡스타인 기형의 수술적 교정)

  • Chung, Jin-Woo;Im, Yu-Mi;Jung, Sung-Ho;Yun, Tae-Jin
    • Journal of Chest Surgery
    • /
    • v.40 no.7 s.276
    • /
    • pp.473-479
    • /
    • 2007
  • Background: The Hetzer procedure for the correction of Ebstein's anomaly has the advantages of technical feasibility and incorporation of the atrialized right ventricle (RV) into the functional RV. Material and Method: We preformed a retrospective review of 11 patients with Ebstein's anomaly and they had undergone a Hetzer procedure between March 2002 and December 2006. Result: The median age at operation was 19.8 years (range: 6 months ${\sim}56$ years). There were 4 males and 7 females. All patients showed severe tricuspid regurgitation (TR) preoperatively, and arterial desaturation (<95%) was present in 3 patients. The original Hetzer technique was employed in 6 patients with the Carpentier type A anomaly. In the remaining 5 patients with the Carpentier type B or C anomalies, valve competence was restored at the level of the displaced tricuspid valve mechanism. Adjunct bidirectional cavo-pulmonary shunt, or one and a half ventricle repair strategy was employed for all the patients. The median follow-up was 8.6 months (range: $0.8{\sim}51.9$ months). There was no early or late death, and the immediate postoperative TR was trivial to mild in 8 patients. The median cardio-thoracic ratios on chest X-ray at the preoperative period and at postoperative 0, 1 and 6 months were 65%, 62%, 55% and 55%, respectively. Conclusion: The original or modified Hetzer procedure for Ebstein's anomaly shows excellent intermediate-term outcomes.

Identification of Iron Compounds in Black Surface Layer of Stone Monuments (석조문화재 표면흑화 부위에 존재하는 철화합물의 동정)

    • Journal of the Mineralogical Society of Korea
    • /
    • v.17 no.1
    • /
    • pp.75-83
    • /
    • 2004
  • Blackening on stone monuments is serious problem, because it is not only aesthetically unattractive, but also an important process in stone deterioration. Black surface layers contain often a large amounts of iron compound. Therefore it is assumed that besides another elements the iron have influence on blackening of surface. After the samples of black surface layers were collected from the stone monuments (Museumsinsel) in Berlin, Germany, especially in this study has been used Mossbauer spectroscopy in order to determine the valence and chemical composition of iron. Mineralogical and chemical analyses were carried out X-ray diffractormetry and X-ray fluorescence method on the black surface layer's samples and original stone samples. The origin of Iron compound in the black surface provides the important clue for the conservation work of stone monuments, like removing of black surface. To find it, black surface layer on white sandstone -it contains very small amount of iron compound- was compared with that on the red sandstone (Fe contains very small amount of iron compound- was compared with that on the red sandstone (Fe abundant). As a results, it is assumed that the iron in black layer on white sandstone is originated mainly from a surrounding environmental material and for the iron in black layer on the red sandstone is responsible the original stone. Even if black surface layer was removed from the red sandstone, some other conservation method should be studied beyond removing of black surface layer, because the iron can move continuously from the inner zone of original stone to surface area.

A Study on Parody Expressed in Modern Fashion (현대 패션에 나타난 패러디(Parody)에 관한 연구)

  • 고현진;김민자
    • Journal of the Korean Society of Costume
    • /
    • v.25
    • /
    • pp.249-268
    • /
    • 1995
  • Parody has recently prevailed as one of the important techniques of creation in art. The purposes of this study are to reaffirm the pos-ition of fashion as an art by clarifying parody depicted in fashion and to make an opportunity to reconsider the meaning of creation in fashion design through the significance of par-ody. For these purposes, documentary studies about parody in literature and art which had been discussed more often were preceded as a framework of this research. framework of this research. Basedd upon that, parody phenomena in fashion as well as art were analyzed. The synthetic results are as follows ; 1. Parody is a kind or critical technique and can be conceived as a process of creation. The established primary style (material) which is well-known and familiar is imitated and then is recreated in new manner through the three types of parodization, that is, the change of its external form, the change of its internal mean-ing and the shift from its place (i.e. displace-ment). 2. Parody in fashion is also analyzed based upon the three types of parodization which designer's will and expression is necessarily required. First, the parody through the change of external form is to have its effect of novelty, unexpectedness, playfulness, wit, mackery, satire, irony, paradox by changing the form of the original through imitation with similarity, transformation, exaggeration, em-phasis. Second, the parody through the change of internal meaning is to bring about paradox, irony, contempt, satire, unex-pectedness by applying the original to inappro-priate subject through its substitution, inver-sion. Third, the parody through displacement is to pursue a jarring incongruity that results from shifting the original to other context. Its effect consists of paradox, unexpectedness, playfulness, ridicule, mockery, satire, irony. In general, the parody technique in fashion can be used to have an intention of expressing seriousness, playfulness, satire, grotesque. The representative designers using the parody technique are Lagerfeld, Ricci, YSL, Yama-moto, Castelbajac, Gaultier, Mugler, West-sood, Steiner and so on. 3. Parody is the technique which imitates and then recreates the preceding style ; is at the same time the method which challenges the existing concept of originality-singleness and uniqueness. It reflects the more flexible concept of modern creation in art as well as fashion. The imitation as the creation, the characteristic of parody is recognized as an creative expressiveness, publicity, intention. Thus it differenciates from copy which is uncritical mimicry.

  • PDF

The Whereabout of the Bell Imperial-Dragon-Temple (皇龍寺 49萬소斤 巨鐘은 어디로)

  • Lee, Byung-Ho
    • The Journal of the Acoustical Society of Korea
    • /
    • v.16 no.6
    • /
    • pp.5-11
    • /
    • 1997
  • Recently, the search for the whereabout of the huge Bell Imperial-Dragon-Temple becomes a great issue. If it happens to be found out and ringing at the original location of the Bell in Kyungjoo City, the Bell might be a great national treasure and lasting to the eternity with her beautiful sound. The Bell was so huge that the total weight of the raw material put into crucibles was 497,581 Kun (289 tons), the shoulder weight 10.3 Chuk (3.14 m) and the maximum thickness 9 Chon (27.4 cm). The Bell was erected in 754 in Shilla Dynasty and was assumed to be lost during the war time by the 3rd invasion of Mongolians (1235~8). However, the author found out that the huge Bell was recast into a new small Bell (8.1 ton) in 1103 by the people of Koryu Dynasty and then the new small Bell was hung in the same position as in the original huge Bell. 135 years later, the new small Bell was carried out by Mongolian forces as a spoil of war from Kyungjoo to the Bay Tonghaegoo, through the saddle point of Mountain Toham, Yangbuk and Riber Great Bell. At the bay, Mongolian forces wished to bring back the Bell to Mongolia by a ship, but they dropped the Bell into the sea by accident. So, if this was the case, the bell at the seabed may be the new small bell (7.4 ton) but not the original huge Bell (41.0 ton) For the evaluation of missing data of the two bells, the author sets up two equations relating all the dimensions and their weights, which seems to be a useful guide to the design of bells. The results of the evaluation of the Bells are as follows. The huge Bell The new small Bell Weight 41.0 ton 7.4 ton Shoulder ht. 3.14 m 2.07 m Mouth diameter 2.468 m 1.546 m Max. thickness 27.4 cm (9 Chon) 11.9 cm (3.9 Chon)

  • PDF

Physico-chemical Properties of Disturbed Plastic Film House Soils under Cucumber and Grape Cultivation as Affected by Artificial Accumulation History

  • Han, Kyung-Hwa;Ibrahim, Muhammad;Zhang, Yong-Seon;Jung, Kang-Ho;Cho, Hee-Rae;Hur, Seung-Oh;Sonn, Yeon-Kyu
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.48 no.2
    • /
    • pp.105-118
    • /
    • 2015
  • This study was carried out to investigate the effects of profile disturbance with different artificial accumulation history on physico-chemical properties of soil under plastic film house. The investigations included soil profile description using soil column cylinder auger F10cm x h110cm, in situ and laboratory measurements of soil properties at five sites each at the cucumber (Site Ic ~ Vc) and grape (Site Ig ~ Vg) plastic film houses with artificial soil accumulation. The sites except sites Ic, IVc, IVg and Vg, belong to ex-paddy area. The types of accumulates around root zone included sandy loam soil for 3 sites, loam soil for 1 site, saprolite for 2 sites, and multi-layer with different accumulates for 3 sites. Especially, Site IIg has mixed plow zone (Ap horizon) with original soil and saprolite, whereas disturbed soil layers of the other sites are composed of only external accumulates. The soil depth disturbed by artificial accumulation ranged from 20 cm, for Site IIg, to whole measured depth of 110 cm, for Site IVc, Vc, and Site IVg. Elapsed time from artificially accumulation to investigation time ranged from 3 months, Site IIc, to more than 20 years, Site Vg, paddy-soil covering over well-drained upland soil during land leveling in 1980s. Disturbed top layer in all sites except Site Vg had no structure, indicating low structural stability. In situ infiltration rate had no correlation with texture or organic matter content, but highest value with highest variability in Site IIIc, the shortest elapsed time since sandy loam soil accumulation. Relatively low infiltration rate was observed in sites accumulated by saprolite with coarse texture, presumably because its low structural stability in the way of weathering process could result in relatively high compaction in agro-machine work or irrigation. In all cucumber sites, there were water-transport limited zone with very low permeable or impermeability within 50 cm under soil surface, but Site IIg, IIIg, and Vg, with relatively weak disturbance or structured soil, were the reverse. We observed the big change in texture and re-increase of organic matter content, available phosphate, and exchangeable cations between disturbed layer and original soil layer. This study, therefore, suggest that the accumulation of coarse material such as saprolite for cultivating cash crop under plastic film house might not improve soil drainage and structural stability, inversely showing weaker disturbance of original soil profile with higher drainage.

Recent Trends of the Scientific Publication Patterns of Korean Thoracic and Cardiovascular Surgeons (대한민국 흉부외과 의사들의 논문저술경향의 변화)

  • Lim, Cheong
    • Journal of Chest Surgery
    • /
    • v.42 no.5
    • /
    • pp.561-565
    • /
    • 2009
  • Background: There haven't been any papers that have analyzed the recent trends in the changing attitudes and results of Korean thoracic and cardiovascular surgeons who submit scientific papers to the major cardiothoracic journals. Material and Method: I analyzed the original articles that were published in the major cardiothoracic surgery journals from 1995 to 2008 by Korean thoracic and cardiovascular surgeons. The data was retrieved from the internet websites of Pubmed, three major international SCI (Science Citation Index) journals and the Korean Journal of Thoracic and Cardiovascular Surgery. I then analyzed the data according to the chronological year, the subjects and the subspecialties. Result: The total number of original articles in the three international journals was 14,629. Among them, the number of articles written by Korean scientists was 157 (1.07%). A sharp increase was identified from 28 articles out of 7,674 articles (0.36%) prior to 2002, to 129 articles out of 6,955 articles (1.83%) after 2003. On the other hand, the annual number of articles in the Korean Journal was markedly decreased from 126.8 articles by 1999 to 80.0 articles after 2000. The annual number of articles in the Korean Journal was also decreased from 58.8% by 1999 to 48.3% after 2000. Conclusion: There was an observed increase in submitting articles to the international SCI journals after 2000 rather than to the Korean journal. The proportion of original articles in the Korean journal is also decreasing. I think we need to pay special attention to improve the quality and quantity of articles published in the Korean journal.

Bibliometric Analysis of the Journal of the Korean Society of Clinical Toxicology (대한임상독성학회지에 발표된 연구 문헌의 통계적 분석)

  • Lee, Jin Hyuck;Lim, Tae Ho;Kim, Won Hee;Kim, Chang Sun;Oh, Jae Hoon;Kang, Hyung Goo;Choi, Hyuk Joong;Kang, Bo Seung
    • Journal of The Korean Society of Clinical Toxicology
    • /
    • v.11 no.2
    • /
    • pp.96-100
    • /
    • 2013
  • Purpose: The purpose of this study was to examine the research characteristics and the trend of the Journal of the Korean Society of Clinical Toxicology by bibliometric analysis. Methods: This study was a retrospective quantitative literature review of the publications. We collected data from the internet homepage of the Korean Society of Clinical Toxicology. Among 228 publications, a total of 225 articles were included in this analysis. The data were analyzed from different perspectives, including article types, study design, number of authors, type of toxic material, and the top five ranking prolific authors and the affiliated organization were identified. Results: A total of 225 articles were analyzed; 98(43.6%) were original articles, 115(51.1%) were case reports, and 12(5.3%) were reviews. Among the original articles, nine were prospective studies and 89 were retrospective studies, which were assorted according to study design; there were two(2.0%) cross sectional studies, 93(94.9%) cohort studies, and three(3.1%) etc. The median number of authors per article was five and the top five ranking authors and affiliated organizations published 31.1% and 32.8% of total articles, respectively. The most abundant topic was pesticides, followed by natural poisons and poisons encountered in the work place. Conclusion: Since its foundation, the Journal of the Korean Society of Clinical Toxicology has published 19 issues and 228 articles and has played a key role in development of toxicology research in Korea. However, low ratio of original articles and a decrease in the number of recent articles indicates that greater effort is needed in clinical research. In addition, further interest of many experts and various institutions is necessary.

  • PDF

Dislodgement resistance of modified resin-bonded fixed partial dentures utilizing tooth undercuts: an in vitro study

  • Doh, Re-Mee;Lee, Keun-Woo
    • The Journal of Advanced Prosthodontics
    • /
    • v.1 no.2
    • /
    • pp.85-90
    • /
    • 2009
  • STATEMENT OF PROBLEM. Over the years, resin-bonded fixed partial dentures (RBFPDs) have gone through substantial development and refinement. Several studies examined the biomechanics of tooth preparation and framework design in relation to the success rate of RBFPDs and considered retention and resistance form essential for increase of clinical retention. However, these criteria required preparations to be more invasive, which violates not only the original intentions of the RBFPD, but may also have an adverse effect on retention due to loss of enamel, an important factor in bonding. PURPOSE. The object of this in vitro study was to compare the dislodgement resistance of the new types of RBFPDs, the conventional three-unit fixed partial denture, and conventional design of RBFPD (Maryland bridge). MATERIAL AND METHODS. Fifty resin mandibular left second premolars and second molars were prepared on dentiforms, according to the RBFPD design. After model fabrication (five group, n = 10), prostheses were fabricated and cemented with zinc phosphate cement. After cementation, the specimens were subjected to tensile loading at a cross head speed of 4 mm/min in a universal testing machine. The separation load was recorded and analyzed statistically using one-way analysis of variance followed by Duncan's multiple range test. RESULTS. Group V, the pin-retained RBFPDs, had the highest mean dislodgement resistance, whereas specimens of group II, the conventional RBFPDs, exhibited a significantly lower mean dislodgement resistance compared to the other 4 groups (P <.05). There were no significant differences between group I, III, and IV in terms of dislodgement resistance (P>.05). Group V had the highest mean MPa (N/$mm^2$) (P <.05). There was no significant difference between groups I, II, III and IV (P > .05). CONCLUSION. Within the limits of the design of this in vitro study, it was concluded that: 1. The modified RBFPDs which utilizes the original tooth undercuts and requires no tooth preparation, compared with the conventional design of RBFPDs, has significantly high dislodgement resistance (P < .05). 2. The modified RBFPDs which utilizes the original tooth undercuts and requires minimal tooth preparation, compared with the conventional FPDs, has significantly no difference in retention and dislodgement resistance)(P>.05). 3. The pin-retained FPDs showed a high dislodgement resistance compared to the conventional three-unit FPDs (P<.05).