• Proceedings of the KSMRM Conference
• /
• 2002.11a
• /
• pp.133-133
• /
• 2002

Purpose： The purpose of paper is to implement software to visualize brain fiber tract using a 24-bit color coding scheme and to test its feasibility. Materials and Methods： MR imaging was performed on GE 1.5 T Signa scanner. For diffusion tensor image, we used a single shot spin-echo EPI sequence with 7 non-colinear pulsed-field gradient directions： (x, y, z)：(1,1,0),(-1,1,0),(1,0,1),(-1,0,1),(0,1,1),(0,1,-1) and without diffusion gradient. B-factor was 500 sec/$\textrm{mm}^2$. Acquisition parameters are as follows： TUTE=10000ms/99ms, FOV=240mm, matrix=128${\times}$128, slice thickness/gap=6mm/0mm, total slice number=30. Subjects consisted of 10 normal young volunteers (age：21∼26 yrs, 5 men, 5 women). All DTI images were smoothed with Gaussian kernel with the FWHM of 2 pixels. Color coding schemes for visualization of directional information was as follows. HSV(Hue, Saturation, Value) color system is appropriate for assigning RGB(Red, Green, and Blue) value for every different directions because of its volumetric directional expression. Each of HSV are assigned due to (r,$\theta$,${\Phi}$) in spherical coordinate. HSV calculated by this way can be transformed into RGB color system by general HSV to RGB conversion formula. Symmetry schemes： It is natural to code the antipodal direction to be same color(antipodal symmetry). So even with no symmetry scheme, the antipodal symmetry must be included. With no symmetry scheme, we can assign every different colors for every different orientation.(H =${\Phi}$, S=2$\theta$/$\pi$, V=λw, where λw is anisotropy). But that may assign very discontinuous color even between adjacent yokels. On the other hand, Full symmetry or absolute value scheme includes symmetry for 180$^{\circ}$ rotation about xy-plane of color coordinate (rotational symmetry) and for both hemisphere (mirror symmetry). In absolute value scheme, each of RGB value can be expressed as follows. R=λw｜Vx｜, G=λw｜Vy｜, B=λw｜Vz｜, where (Vx, Vy, Vz) is eigenvector corresponding to the largest eigenvalue of diffusion tensor. With applying full symmetry or absolute value scheme, we can get more continuous color coding at the expense of coding same color for symmetric direction. For better visualization of fiber tract directions, Gamma and brightness correction had done. All of these implementations were done on the IDL 5.4 platform.

• International Commerce and Information Review
• /
• v.13 no.4
• /
• pp.435-462
• /
• 2011

Increased attention has worldwide been given to exporting SMEs pursuing the rapid internationalization from their inception. In spite of the limited resources, exporting SMEs have entered in global markets successfully and then improve their internationalization performance. Nevertheless, there is little empirical research regarding internationalization in exporting SMEs, Using a survey of 317 exporting SMEs, this study designated organizational, entrepreneurial, environmental, and technological characteristics as determinants of internationalization performance as well as investigates empirically the relationships among the determinants of internationalization performance, export Support programs of the government, and internationalization performance. According to the results of the study, firstly, R&D capacity, globalization-orientation, international market environment, and technological characteristics (e.g. technological capacity and imitation) have significant effects on international performances. Finally, it is found that export support programs moderated the relationships between market information management, R&D capacity, management capacity, international market information, and technological capacity, and internationalization performance. Above results indicate that if exporting SMEs would not use export support programs effectively, they could not improve internationalization performance. As well, several implications for researchers and practitioners, limitation of this study and future direction were suggested.

• Journal of Digital Convergence
• /
• v.15 no.7
• /
• pp.319-328
• /
• 2017

This study was done to identify the relationship among smartphone addiction, emotional intelligence, critical thinking disposition and communication skill for nursing students. Subjects were 301 associate nursing students in Korea. The data were collected using self -report questionnaire from november 1 to november 30, 2016. Data were analyzed by frequencies, t-test, ANOVA, Pearson's correlation using SPSS Win 18.0. The score for Smartphone addiction was 2.84. Tolerance was the highest and Virtual world orientation was the lowest in the subdimension. 88.7% of the general user group, 9.6% of the potential risk user group and 1.7% of the high risk user group were in the order of the smartphone addiction. Smartphone addiction were significantly negative correlation with emotional intelligence and critical thinking disposition in nursing students. And the higher smartphone addiction was showed the lower emotional intelligence, critical thinking disposition. Smartphone addiction were no significantly correlation with communication skill in nursing students. Emotional intelligence were significantly positive correlation with critical thinking disposition and communication skill in nursing students. Therefore, To increase emotional intelligence and critical thinking disposition of nursing students, it is necessary to develop and test the program for decrease smartphone addiction of nursing students.

• Journal of The Korean Association For Science Education
• /
• v.30 no.6
• /
• pp.836-849
• /
• 2010

The purpose of this study is to analyze changes of competency observed in teaching of pre-service science teachers through the teaching evaluation and reflective journal writings on science class during the period of student-teaching at high school. To do this, we videotaped all the science classes of six pre-service teachers participating in this study, evaluated their class teachings, and collected moving video clips recorded in their classes, reflective journals, interviews, instructional materials, and teaching evaluation they have provided. From the "Standards for teaching evaluation of science instruction" developed by Korea Education Curriculum and Assessment, sixteen evaluation elements were selected and used for the analysis. According to our results, all preservice teachers show improvement of teaching performance in most of the class evaluation elements as the number of science classes increases. They presented the lowest improvement in the 'to design meaningful learning program,' which was one of the sixteen elements. However, there are substantial individual differences in the pre-service teachers' teaching competence on each evaluation element. Although they thought that 'understanding of scientific concepts' is the most important part of a science class in the beginning of student-teaching training, they showed changes in recognition that 'interaction and respect' and 'managing student behaviors' are also important in the end. They have recognized that writing a reflective journal, based on the video clips recorded in class and teaching evaluation, helps improve their teaching competency. In addition, improvement in teaching competency has influence upon career-orientation towards the school teacher in the future.

• Journal of Biosystems Engineering
• /
• v.26 no.5
• /
• pp.461-468
• /
• 2001

Impact between fruits and other materials is a major cause of product damage in harvesting and handling systems. The oriental pears are more susceptible to bruising than other fruits such as European pears and apples, and are required more careful handling. The interest in the handling of the pears for the processing systems has raised the question of the allowable drop height to which pears can be dropped without causing objectionable damage. Drop tests on pears were conducted using an impact device developed by authors to estimate the allowable drop height without bruising. The impact device was constructed to hold in a selected orientation and to release a fruit by vacuum for dropping on to a force transducer. The drop height was adjustable for zero to 60 cm to achieve the desired distance between the bottom of the fruits and the top of the impact force transducer. The transducer was secured to 150 kg$\sub$f/ concrete block. The transducer signal was sampled every 0.17 ms with a strain gage measurement board in the micro computer where it was digitaly stored for later analysis. The selected sample fruit was Niitaka cultivar of pears which is one of the most promising fruit for export in Korea. The pears were harvested during the 1998 harvest season from an orchard in Daejeon. The sample fruit was selected from two groups which were stored for 3 months and 5 months respectively by the method of current commercial practice. The pears were allowed to stabilize at environmental condition(18$^{\circ}C$, 65% rh) of the experimental room. One hundred fifty six pears were tested from the heights of 5, 7.5. 10 and 12.5 cm while measurement were made of impact peak force, contact time, time to peak force, dwell time, pear diameter and mass. The bioyield strength and modulus of elasticity were measured using UTM immediately after each drop test. The allowable drop height was estimated on the base of bioyield strength of the pears in two ways. One was assumed the peak force during impact test increasing linearly with time, and the other was based on the actual drop test results. The computer program was developed for measuring the impact characteristics of the pears and analyzing the data obtained in the study. The peak force increased while contact times decreased with increasing drop height and contact times of the sample from the hard tissue group. The allowable drop height increased with increasing bioyield strength and contact times, and also varied with Poisson\`s ratio, mass and equilibrium radius of the pears. The allowable drop height calculated by a theoretical method was in the range from 1 to 4 cm, meanwhile, the estimated drop height considering the result of the impact test was in the range from 1 to 6 cm. Since the physical properties of fruits affected significantly the allowable drop height, the physical properties of the fruits should be considered when estimating the allowable drop height.

• Tunnel and Underground Space
• /
• v.17 no.2 s.67
• /
• pp.139-151
• /
• 2007

Stereophotogrammetry is a method to extract information of an interested area by constructing a stereo-image from two or more photos. In this study, the stereophotogrammetry was adopted to obtain the joint orientation and trace length from a sampling window and its measurements were compared with the result by a clinocompass and measuring tape to evaluate the applicability of the stereophotogrammetry to rock joint survey. A commercial stereophotogrammetry program, ShapeMetriX 3D, was used for this purpose. Firstly, the accuracy of the measuring method using ShpaeMetrix 3D was evaluated by a model test. Secondly, joint orientations on a rock slope and tunnel were obtained by using ShapeMetriX 3D and compared with the measurement by a clinocompass. Finally. the effect of base-depth ratio in photographing was evaluated by comparing images with various base-depth ratios, and the usefulness of closed-up photographing on a rock exposure to increase the measurement accuracy was tested. The dip and dip direction of each model plane obtained by ShapeMetriX 3D showed an error ranged between $-5^{\circ}\;and\; 5^{\circ}$ on the basis of the results by the measuring tape. Base-depth ratio proved not to influence the analysis result by ShapeMetriX 3D if all the images were taken without any hidden area. The close-up photographing turned out useful to obtain the detailed images and therefore precise result when ShapeMetriX 3D was adopted.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.139-148
• /
• 2019

Fostering science-gifted individuals are very important for the future of the nation, and it is especially important to cultivate information-gifted individuals in the age of the fourth industry. There is no standardized curriculum for each gifted education center of the University. Therefore, in this study, we analyzed how effective the curriculum developed on the basis of computing thinking is to affect the characteristics of the information-gifted individuals. The curriculum developed on the components of computing thinking was applied to the information-gifted students of K University. In order to verify the effectiveness of the curriculum, we developed a creative personality test and an intrinsic motivation test, and conducted tests before and after the training. We compared pre-post test results by t-test with R program. The creative personality test consisted of 36 items with 6 factors: risk-taking, self - acceptance, curiosity, humor, dominance, and autonomy. The intrinsic motivation test consisted of 20 items with 5 items: curiosity and interest oriented tendency, challenging learning task preference orientation, independent judgment dependency propensity, independent mastery propensity, and internal criterion propensity. The effect of the curriculum on the creative personality of the experimental group was significant (0.009, 0.05). The significance level of the intrinsic motivation was 0.056 and was not significant at the 0.05 level of significance.

• Journal of Korean Dental Science
• /
• v.12 no.1
• /
• pp.13-19
• /
• 2019

Purpose: The aim of this study was to compare the flexural strength of provisional fixed dental prostheses which was three-dimensional (3D) printed by several build directions. Materials and Methods: A metal jig with two abutment teeth and pontic space in the middle was fabricated. This jig was scanned with a desktop scanner and provisional restoration was designed on dental computer-aided design program. On the preprocessing software, the build angles of the restorations were arranged at $0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, and $90^{\circ}$ and support was added and resultant structure was sliced to a thickness of $100{\mu}m$. Processed restorations were printed with digital light processing type 3D printer using poly methyl meta acrylate-based resin. After washing and post-curing, compressive loading was applied at a speed of 1 mm/min on a metal jig fixed to a universal testing machine. The maximum pressure at which fracture occurred was measured. For the statistical analysis, build direction was set as the independent variable and fracture strength as the dependent variable. One-way analysis of variance and Tukey's post hoc analysis was conducted to compare fracture strength among groups (${\alpha}=0.05$). Result: The mean flexural strength of provisional restoration 3D printed with the build direction of $0^{\circ}$ was $1,053{\pm}168N$; it was $1,183{\pm}188N$ at $30^{\circ}$, $1,178{\pm}81N$ at $45^{\circ}$, $1,166{\pm}133N$ at $60^{\circ}$, and $949{\pm}170N$ at $90^{\circ}$. The group with a build direction of $90^{\circ}$ showed significantly lower flexural strength than other groups (P<0.05). The flexural strength was significantly higher when the build direction was $30^{\circ}$ than when it was $90^{\circ}$ (P<0.01). Conclusion: Among the build directions $0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, and $90^{\circ}$ set for 3D printing of fixed dental prosthesis, an orientation of $30^{\circ}$ is recommended as an effective build direction for 3D printing.

• Journal of Science and Technology Studies
• /
• v.19 no.2
• /
• pp.41-83
• /
• 2019

Recently, the establishment of the Special Act on National Research and Development(tentatively named) has been discussed with the aim of providing a legal basis for the comprehensive management of national research and development programs, which have thus far been independently implemented by government ministries. This paper analyzes the legislative process of the Framework Act on Science and Technology(hereafter, the "Framework Act") introduced for a similar purpose in 2001. By examining who had proposed various versions of the legislation prior to the enactment of the Framework Act, and which draft bill was derived ultimately through controversies, this paper will present the following two arguments: First, the obsession with a single regulation that can be applicable to all national research and development programs may lead to unintended consequences, given that the history of national research and development programs, each of which has been implemented by different government ministries, is quite long. Second, the Framework Act has an impact to date while it consistently internalizes the very unique orientations, as the concepts of "national competitiveness" and "national innovation system" postulate, even though it failed to establish an integrated rule. The case of the Framework Act will be a window through which one can glimpse how the present debate on the enactment of the Special Act on National Research and Development shall proceed, and further, reflect on the issues that were overlooked.

• Journal of the Korean Society of Radiology
• /
• v.14 no.7
• /
• pp.915-922
• /
• 2020

This study analyzed the content of use Tendency and addiction according to smartphone use of targeting radiological Technologist working in Gyeongnam area. The tool used as the data for the study is a survey. From April 21 to May 31, 2019, a total of 330 questionnaires were distributed to radiological Technologist working at medical institutions in Gyeongnam, and 300 copies suitable for the study were SPSS/PC Ver 18.0 program for Analysis was performed using. The factors of the study subject's tendency to use smartphone were communication, information, leisure, and convenience. As for the addiction factors, a total of 37 questions were analyzed, including daily living disorder, virtual world orientation, tolerance, and withdrawal. Smartphone-related characteristics were set as monthly average fee, usage time, and SNS usage time, and technical statistics, t-test, ANOVA, correlation and regression analysis were performed. The radiological Technologist tendency to use smartphones was 3.10±.55 points, which was average, and smartphone addiction was 2.34±.62 points, which was lower than the average. It was found that there was a significant correlation between the radiological Technologist Tendency to use smartphone and addiction. The effect of radiological Technologist tendency to use smartphone on addiction it was found to account for 10.8%. Through this study, it can be said that it is important to analyze the addiction factors according to the tendency use smartphone of radiological Technologist and to prepare a desirable plan for smartphone use.