• Environmental Analysis Health and Toxicology
• /
• v.19 no.2
• /
• pp.177-182
• /
• 2004

Alcohol consumption and exposure to endocrine disruptors and industrial solvents have been implicated in impaired spermatogenesis, increase in the incidence of malformed sperm and decrease in the percentage of moving sperm. The aim of this study was to determine and compare the direct effects of some organic solvents(bisphenol A; BPA, dibutyl phthalate; DBP, formaldehyde; HCHO, dimethylsulphoxide; DMSO, ethanol) on mucus penetration distance, motility and survival rate of human sperm in vitro. Semen samples from 3 health subjects were prepared using swim-up method and 0.0005-0.5% organic solvents were added to the test medium. BPA, DBP, HCHO and DMSO produced significant decreases in the motility and survival rate with a different potency. The most potent inhibition of mucus penetration distance, motility and survival rate was observed after exposure to HCHO. A concentration of 0.0005% HCHO significantly inhibited sperm motility. When ethanol m.: added directly to sperm, at concentrations equivalent to that in serum after heavy drinking, these damaging effects were lowest compared with other solvents. Present study shows that each compound has different toxic potency to human sperm and we need special caution for the use of HCHO.

• Journal of the Korean Chemical Society
• /
• v.11 no.2
• /
• pp.51-55
• /
• 1967

A procedure, which is effective enough to label various compounds at low temperature by radioactive iodine, was investigated. The chloramine-T procedure was mostly effective for labelling various protein, amino acids, hormones, and organic compounds by iodine, and the procedure was able to afford both high specific activity and high radiochemical yield. However, the procedure was ineffective for labelling unsaturated compounds or other organic compounds which has not active aromatic nucleus of reactive character. The radiochemical yield of the procedure was generally averaged from 100% to 60%. The reactivity of the aromatic part of the organic compound towards this reagent was correspond to that of an electrophillic reagent. The procedures were described and the reaction path was considered.

• Textile Coloration and Finishing
• /
• v.19 no.2
• /
• pp.32-35
• /
• 2007

Cyclodextrin is a cyclic oligosaccharid material which shows an ability to incorporate organic guest molecules inside their cavity area. Thus, this ${\beta}-cyclodextrin$ treatment on fiber substrates may provide the changed surface characteristics of the substrates such as solubility, chemical reactivity and spectral property. In this context, the aim of this present work is to make a bridge connection using hetero-bi-functional reactive dye between fiber substrates and ${\beta}-cyclodextrin$. In addition, the corresponding Berberine inclusion behaviors into the inner cavity of ${\beta}-cyclodextrin$ was examined. The %exhaustion of Berberine inclusion as a guest molecule within the ${\beta}-cyclodextrin$ was measured using UV-Vis spectrophotometer. The findings showed that the %exhaustion of Berberine inclusion increased with increasing the prepared dye bridge compound and ${\beta}-cyclodextrin$ host material.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.1
• /
• pp.16-23
• /
• 1998

Effect of Fermentation temperature on the changes of chemical components in Kakudgi during fermentation was investigated by measuring free sugar, organic acid and volatile compounds up to 57 days at several temperatures. The mannitol was increased in palatable period in contrast with those of other free sugars. The higher the initial fermentation temperature was and the longer the initial fermentation time at 2$0^{\circ}C$ was, the faster the second increasing period was and the less the initial contents was. Lactic acid was increased 6~31 times from a little amount at the initial period. The higher the initial fermentation temperature was and the more the increasing content was. But malic acid which was abundant(55.1% of total nonvolatile organic acid) in the initial fermentation period was remarkably decreased in the palatable period. The change of the sulfides among the volatile compounds was remarkable. Methyl allyl sulfide which was a little in the initial fermentation period was remarkably increased in the final fermentation period, and the correlation coefficients between the content of methyl allyl sulfide and aroma in sensory evaluation were high. It could be suggested that the fermentation temperature should be set to 4$^{\circ}C$ after fermentating at 2$0^{\circ}C$ for 36 hours in the view point of keeping the Kakdugi taste and quality well because of high content of free sugar and nonvolatile organic acids.

• KSBB Journal
• /
• v.18 no.1
• /
• pp.51-54
• /
• 2003

The objective of this study was to optimize culture conditions and to produce hydrogen and organic compounds using microalga Chlamydomonas reinhardtii. First of all, C. reinhardtii UTEX 90 was chosen from the three kinds of strains in terms of their hydrogen and organic compound productivity. The optimum $\textrm{CO}_2$ concentration range of C. reinhardtii UTEX 90 was 1to 3%. We tested two medium, which are popular in this microalga culture; Brostol's medium and TAP medium (8). The cell growth in TAP medium was found to be higher than a Brostol's medium. Optimum culture with 3% of $\textrm{CO}_2$ in TAP medium produced the most hydrogen ($0.5\mu$ mol/ mg DCW), though Bristol's medium produced twice as much total organics.

• Journal of Korean Society of Water and Wastewater
• /
• v.13 no.1
• /
• pp.72-80
• /
• 1999

Separation of VOCs(Volatile Organic Compounds) in Water Using Activated Carbon is known to be effective. Activated Carbon has been and will be employed in many water treatment plants. Simplified plug flow homogeneous surface diffusion model(PFHSDM) has been used to predict adsorption of organic matter. Finite Element Method(FEM) was used to analyze the model. Out of water quality control substances, benzene, toluene and tetrachloroethylene were used in the small column test. Film diffusion coefficients and surface diffusion coefficients were obtained from the column test, and were compared with the modeling results. Mc Cune, Williamson, William and Kataoka model, were compared with film diffusion coefficients obtained in the test. McCune model was fitted best for those VOCs used in this experiment. Film diffusion coefficients of VOCs obtained were benzene 0.265 cm/min, toluene 0.348 cm/min and tetrachloroethylene 0.298 cm/min. Surface diffusion coefficients of VOCs obtained were benzene $6.36{\times}10^{-8}cm^2/min$, toluene $3.20{\times}10-8cm2/min$, and tetrachloruethylene $4.94{\times}10^{-8}cm^2/min$.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.3
• /
• pp.361-369
• /
• 2010

A study on the corrosion inhibition of metals is important in many industrial applications (carbon steel, copper, aluminum, SUS 304, nickel). In this study, we investigated the C-V diagrams related to the surface corrosion of metals. It was observed through the SEM that the surface corrosion state of the various metals had the corrosion potential by the scan rate and the organic inhibitor containing an amine group. We determined to measure cyclic voltammetry using the three-electrode system. The measurement of oxidation and reduction ranged from -1350mV to 1650mV. The scan rate was 50, 100, 150, and 200mV/s. It turned out that the C-V characterization of SUS 304 was irreversible process caused by the oxidation current from the cyclic voltammogram. After adding organic inhibitors, the adsorption film was constituted, and the passive phenomena happened. As a result, it was revealed that the inhibition effect of metal corrosion depends on the molecular interaction, and the interaction has influence on the adsorption complex.

• Membrane and Water Treatment
• /
• v.10 no.3
• /
• pp.223-229
• /
• 2019

Titania modified by 2-ethylimidazole (2-EI) (denoted as $2-EI-TiO_2$) demonstrated visible light photocatalytic activity for the degradation of organic compounds. $2-EI-TiO_2$ was a bright brown powder that exhibited similar crystallinity and morphology with the control $TiO_2$. A diffuse reflectance spectrum indicated that $2-EI-TiO_2$ absorbs visible light of all wavelengths. X-ray photoelectron spectroscopy (XPS) confirmed the cationic state of nitrogen species (e.g. Ti-O-N) on the surface of $2-EI-TiO_2$. Visible light-illuminated $2-EI-TiO_2$ degraded $10{\mu}M$ 4-chlorophenol (4-CP) by approximately 85% in 4 h. The photochemical activity of $2-EI-TiO_2$ was selective in targeting the organic compound. The repeated use of $2-EI-TiO_2$ decreased the photocatalytic activity for the 4-CP degradation. Experiments using radical scavengers and oxidant probes revealed that the oxidation by photogenerated holes is responsible for the degradation of organic compounds by illuminated $2-EI-TiO_2$ and the role of $^{\bullet}OH$ is negligible.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.4
• /
• pp.269-275
• /
• 2013

Antifungal and insecticidal activity of Korean traditional medicinal plants was carried out to develop natural material for the development of organic cultural heritage conservation. As a result, Phellodendron amurense fruit was finally selected as a candidate of antifungal and insecticidal natural material. An novel active compound was purified from the ethylacetate fraction of Phellodendron amurense fruits using silica gel and Sephadex LH-20 column chromatography and PTLC. The compound was obtained as yellow oil form; UV ${\lambda}_{max}$(MeOH): 260 nm. The chemical structure of novel compound was determined as (4'-ethyl-2'-methylfuranyl)-6-methoxy-7-methylnona-2E,4E,6Z,8E-tetraenoic acid on the basis of various NMR experiments including $^1H$- and $^{13}C$-NMR, HMQC, HMBC and ESI-mass spectrum.

• KIEAE Journal
• /
• v.1 no.1
• /
• pp.35-43
• /
• 2001

The VOC, which were detected from the newly built house, exist as a certain number of types according to the characteristics of the change of VOC concentration indoors. In this paper, we aim to divide the VOC into types so that those with similar characteristics of the transition of their concentration are in the same group and select the representative compound according to each classified type, and to verify these processes statistically in order to verify and propose new method creating the representing index of the VOC concentration in indoor which is used in evaluation of the degree of air pollution. As a result, the characteristic of the change of VOC concentration in the indoor can be divided into three types. Type1; the group in which the concentration is relatively high right after the completion of the house, and then decreases rapidly. Type2; the group in which the concentration is relatively low right after the completion of the house, and then although it shows the tendency of increasing and decreasing repeatedly, it decreases overall. Type3 is the group, which show only one peak at a certain time during the measuring period. As the method like this was verified to have the statistical significance, the Ethylbenzene was selected as the representative compound of type1, and Styrene was selected as that of type2. Moreover, if considering transition of the VOC from the point of similarity, the research method of making the classification and the selection of the representative compound in this study are said to be significant method.