• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2046-2052
• /
• 2008

For the lighting of vehicles structural casting components of aluminum casting alloys are substituted for those of steel or iron. For the manufacturing of large-scale premium quality aluminum castings the developments of a new casting process and a heat treatment process are necessary. The optimum casting design and heat treatment condition for large-scale castings are drawn with the help of Z-Cast software for the casting process analysis in this study. Low pressure sand casting method is applied successfully to produce air bag support components of D357 aluminum casting alloy.

• Archives of Metallurgy and Materials
• /
• 제66권4호
• /
• pp.1023-1027
• /
• 2021

This study investigated the effect of flux type and amounts on recovery behavior of aluminum alloy during the melting process of Al can scrap. The heat treatment was conducted to remove the coating layer on the surface of can scrap at 500℃ for 30 min. The molten metal treatment of the scrap was performed at 750℃ in a high-frequency induction furnace with different flux types and amounts. It was observed that the optimum condition for recovery of Al alloy was to add about 3 wt.% flux with a salt and MgCl₂ mixing ratio of 70:30 during melting process. The mechanical properties of recovered Al alloy were about 254.8 MPa, which is similar to that of the virgin Al5083 alloy.

• 한국환경과학회지
• /
• 제23권5호
• /
• pp.771-780
• /
• 2014

Tetragonia tetragonides is a medicinal plant native to ocean sand soil of southern provinces and has significant effects on the prevention and curing of gastroenteric disorders. Despite of its popularity, supply of the plant has never met the level of demand because of the absence of an adequate culturing method. The present study, thereby, was conducted for classifying the plants with geographically different characteristics, studying growth habits, developing a new culturing method and establishing a large scale propagation system of selected superior individual plants. The study was also aimed for revealing optimum conditions for seed treatment, fertilization, and efficient culturing system and thereby, for utilizing the plant as a new income source for rural communities. The seed was elongated with size of 2.6 mm (width) ${\times}$ 1.8 mm (length). No difference in seed size was observed depending on different inhabitate. Each flower produced about 4.5~4.8 seeds. Germination rate was high for seeds matured for 40 days after fertilization, but deceased to 50% for seeds matured only for 20 or 30 days. Seed dormancy lasted 6 months and seed storage at humid $5^{\circ}C$ facilitated germination. Mechanical obstruct of seed germination was due to seed coat and removal of seed coat enhanced the germination rate. Optimum temp. for seed storage was $5^{\circ}C$, and high germination rate was maintained for 350 days. However, for stratification condition or at room temperature, germination was significantly reduced as storage time increased Optimum treatment of plant growth regulators was soaking in $GA_3$ 250 mg/L for 1 hr. The priming treatment with 50 mM $Ca(NO_3)_2$ at $20^{\circ}C$ for two days improved the seed germination with 10% compared to non-treated control. The treatment of 20% NaOCl for 3 hr. improved the seed germination rate up to 10% and 1 day ahead.

• 대한환경공학회지
• /
• 제30권8호
• /
• pp.781-788
• /
• 2008

본 연구는 실험계획법과 통계학적 분석을 이용하여 세가지 유기성 폐기물(축산폐수, 하수슬러지, 음식물쓰레기)의 혼합 산발효를 위한 최적 운전 조건을 구하였다. 먼저, 세가지 기질의 최적 혼합비 도출을 위해 15회의 회분식 실험을 진행하였고, 획득한 실험 값의 통계학적 분석 결과 도출된 최적 혼합비는 chemical oxygen demand(COD) 기준으로 축산폐수, 하수슬러지, 음식물쓰레기 순으로 0.4 : 1.0 : 1.1로 나타났다. 도출된 최적 혼합비율로 준비된 기질을 대상으로 산발효 연속 운전 최적화를 수행하였다. 중요 운전 인자로서 hydraulic retention time(HRT)과 기질 농도를 설정하고, 실험계획법의 일종인 반응표면법(Response surface methodology, RSM)을 적용하였다. 3단계의 실험 계획에 의거한 연속 운전 결과, total volatile fatty acids(TVFA) 생성을 극대화 할 수 있는 최적 운전 조건은 HRT 2일, 기질 농도 29,237 mg COD/L로 밝혀졌고, 제시된 2차 경험적 모델식을 통해 최적 운전 조건에서 73%의 TVFA 증가율을 예상할 수 있었다. 도출된 모델식의 정확도 검증을 위한 실험 결과, 약 4%의 상대오차를 나타내 반응표면법을 비롯한 실험계획법과 통계학적 분석 방안이 성상 변화가 큰 실 폐기물의 최적화에도 효과적으로 적용될 수 있는 것으로 나타났다.

• 한국물환경학회지
• /
• 제20권1호
• /
• pp.86-92
• /
• 2004

Lab-scale experiments have been carried out to investigate ammonia stripping with a modified spray tower for removing ammonia nitrogen from swine wastewater. The operating conditions such as initial pH, temperature, air flow, hole size of distributor determining the diameter of water drops, and influent solids concentration were closely examined focusing on removal efficiency of ammonia. As a result of the experiment, in order to achieve high rate of ammonia removal by the air stripping system, the air flow rate must be supplied at high rate with sufficiently high initial pH, temperature. The optimum operating condition to meet the residual ammonia concentration of 300 mg/L was the initial pH of 11.0 at $35^{\circ}C$ with the air flow rate of 20 L/min. It also showed that the smaller hole size is, the higher removal rate of ammonia is expected. However, when used a small sized distributor (2 mm), the flooding problem at the upper column occurred due to clogging of the hole. With regard to the influent solids concentration, it was showed that the lower concentration of solids, the higher removal rate of ammonia. The removal of particulate materials in influent led to improve the removal efficiency of ammonia, rather than to control the operating condition including initial pH, temperature, and air flow. The empirical correlation between KLa and operating parameters would be driven as, $K_{La}=(0.0003T-0.0047){\cdot}G^{0.3926}{\cdot}L^{-0.5169}{\cdot}C^{-0. 1849}$. The calculated $K_{La}$ from proposed formula can be used effectively to estimate the optimum reaction time and to calculate the volume of modified spray tower system.

• 자원리싸이클링
• /
• 제30권4호
• /
• pp.3-10
• /
• 2021

도시광산의 대표적인 사례인 폐 전자부품 재활용 분야는 유용한 선별기술의 개발이 필요하다. 본 연구에서는 전자부품들을 4개의 그룹으로 선별하기 위해 딥러닝에 의한 이미지 식별을 기반으로 한 선별기를 개발하였다. 전자부품들은 폐 인쇄회로기판으로부터 회수되었으며, 처리 후 차이점에 따라 분리되어야 한다. 선별기는 GPU, 카메라, 컨베이어벨트, 공기 압축기로 이루어진 워크스테이션으로 구성되어있다. 컨베이어벨트(벨트 속도: 6cm/s) 위에 있는 작은 크기(3.5cm 이하)의 전자부품들을 데이터로 가져와 학습했다. 이미지 식별의 정확도는 종류에 따라 96%, 그리고 그룹에 따라 99%였다. 벨트속도와 압축공기의 블로다운 시간과 같은 작동조건에 변화를 주었을 때, 이미지 식별의 정확도 그리고 블로다운에 의한 회수율을 측정하여 선별의 최적 조건을 결정했다. 최적조건에서 이미지 분류의 정확도는 그룹별로 98.7%였다. 선별 효율은 70% 이상이었다.

• 한국자원식물학회지
• /
• 제22권2호
• /
• pp.136-144
• /
• 2009

기생초, 각시취 및 저먼케모마일의 종자를 $15{\sim}30^{\circ}C$에서 각각 명조건과 암조건으로 20일 동안 발아시킨 결과 기생초는 $15^{\circ}C$, 암조건에서 4일 후에 83.0%, 각시취는 $25^{\circ}C$, 명조건 20일 후에 51.7%, 저먼케모마일은 $25^{\circ}C$, 암조건에서 4일 후에 90.3%의 발아율을 보였다. 발아된 종자를 암조건에서 길이생장을 시킨 결과 기생초는 $30^{\circ}C$에서 5일, 각시취는 $25^{\circ}C$에서 6일, 저먼캐모마일은 $20^{\circ}C$에서 6일 재배하는 것이 좋을 것으로 생각되었다. 3종 모두 녹화처리시 길이생장이 감소하는 특징을 보였으나, 기생초와 각시취 새싹채소는 길이생장이 억제되는 대신 부피생장 이 왕성한 특징을 보였다. 녹화처리에 대한 생육반응은 각기 다르게 나타나 기생초는 녹화 3일, 각시취는 2일이 적합하였으며, 저먼케모마일은 녹화처리를 하지 않고 출하하는 것이 좋은 것으로 나타났다. 3종 모두 수확 후 밀봉되는 용기에 포장하는 것이 수분 감소량을 억제시키면서 오래 저장할 수 있는 것으로 나타났다. 그러나 종에 따라 온도와 통기구의 유무에 따른 수분 감소량 및 갈변 억제 등 품질 유지에 다양한 반응을 보이므로, 판매 형태 및 주기에 따라 저장환경을 달리하는 것이 좋을 것으로 생각된다.

• 농업과학연구
• /
• 제10권2호
• /
• pp.242-248
• /
• 1983

상치종자(種子)에 광질(光質), 생장조절물질(生長調節物質), soduim hypochlorite침지처리하여 발아시험(發芽試驗)한 결과(結果)는 다음과 같다. 1. 자연광(自然光) 및 적색광하(赤色光下)에서 GA 및 BA는 발아(發芽)를 촉진(促進)시켰으며, 청색광(靑色光)이나 ABA는 발아(發芽)를 억제(抑制)시켰다. 2. 생장조절물질(生長調節物質)의 복합처리시(複合處理時) GA 농도(濃度)가 높아질수록 발아율(發芽率)은 상승(上乘)하며 암흑하(暗黑下)에서는 BA농도(濃度) 10ppm에서 발아율상승효과(發芽率上乘效果)가 컸다. 3. Sodium hypochlorite 20분(分) 이상(以上) 침지처리로 암흑하(暗黑下)에서도 85%이상(以上)의 발아율(發芽率)을 보였다. 4. ABA하(下)에서도 sodium hypochlorite 침지처리로 발아율상승효과(發芽率上乘效果)를 볼 수 있었다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제33권2호
• /
• pp.78-84
• /
• 2016

The antioxidant activity of silkworm powder treated by proteolytic enzyme was investigated. Total protein content of silkworm power was assayed using BCA, Bradford assays and SDS-polyacrylamide gel electrophoresis (PAGE) with alkaline protease treatment conditions including temperature and pH. The optimum condition of alkaline protease treatment for silkworm powder was found to be $60^{\circ}C$ and pH 7. The alkaline protease treatment resulted in increased contents of free amino acids, total polyphenol and total flavonoid compared to control group. The silkworm hydrolysates showed excellent antioxidant activities in various in vitro models such as 2,2 diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity, 2,2 - azino-bis(3-ethylbenzthiazoline-6)-sulfonic acid (ABTS) radical scavenging activity. These results provide useful information for using silkworm powder as an ingredient in functional foods and for exploiting alkaline protease treatment to improve the extractability and bioactivity of a raw material.

• 신재생에너지
• /
• 제1권2호
• /
• pp.60-72
• /
• 2005

The effect of alkaline pre-treatment on the solubilization of waste activated sludge(WAS) was investigated, and the biodegradability of WAS, pretreated WAS, [PWAS], food waste and two types of mixture were estimated by biochemical methane potential [BMP] test at $35^{\circ}C$. The biodegradability of PWAS and mixture waste were significantly improved due to the effect of alkaline hydrolysis of WAS. An alkaline pre-treatment was identified to be one of the useful pre-treatment for improving biodegradability of WAS and mixture waste. In high-rate anaerobic co-digestion system coordinate with an alkaline pre-treatment in process, the digesters were operated at the HRT of 5, 7, 10 and 13 days with a mixture of FW $50\%\;and\;PWAS\;50\%,\;$In term of $CH_4$ content, VS removal and specific methane production [SMP] which are the parameters in the performance of digester, the optimum operating condition was found to be a HRT of 7 days and a OLR of 4.20g/L-day with the highest SMP of 0.340 L $CH_4/g$ VS.