• Journal of Korean Society for Atmospheric Environment
• /
• v.2 no.1
• /
• pp.91-101
• /
• 1986

Relations of each factor affected by emissions and the prediction of performance have been analyzed numerically by cycle simulation in the Spark Ignition Engine. Through theoretical analysis and experiments, the results are obtained as below. The calculated results and the experimental ones are almost highly agreeable on cycle simulation model, exhaust gas analysis and efficiency for processes in cylinder. Therefore this model is proved appropriate and can be useful for optimum design of Spark Ignition Engines on parametric studies. It is reaffirmed that the Wiebe's function is suitable for predicting Combustion Ration in Spark Ignition Engines. On parametric studies, it is found that optimum conditions whose density of emissions are lower and efficiency is maximum within propriety value are crankangle ATDC $15^\circ-20^\circ$, 2400 rpm. A/F=16 in this experiment.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.2
• /
• pp.218-221
• /
• 2010

This paper presents energy efficiency about an electrolyser which is related with the hybrid system of solar cell and fuel cell for using the system more fully. The water electrolyser is the exact reverse of a hydrogen fuel cell; it produces gaseous hydrogen and oxygen from water. Electrolyser technology may be implemented at a variety of scales wherever there is an electricity supply to provide hydrogen and/or oxygen for virtually any requirement. Also, this paper shows optimum operating point in the electrolyser for saving cost of the electrical energy with hybrid system.

• Journal of Plant Biotechnology
• /
• v.3 no.3
• /
• pp.141-144
• /
• 2001

To enhance the shoot induction efficiency from nodal stem of yooza, the culture conditions such as basal medium, carbohydrate source, solidifying agent and the optimum concentration of plant growth regulators for shoot induction were investigated. The nodal explants were cultured better on MS medium than on MT, SH, B5 or W media in considering of shoot induction rate and mean shoot length. Solidifying agent in medium was better with 0.8% agar than with 0.3% agar, 1.2% agarose or 0.2% gelrite. Carbohydrate source in shoot induction medium was efficient with 30 g/L sucrose. The optimum concentrations of plant growth regulators were determined that 0.1 mg/L NAA as auxin was effective on the shoot induction, and 1.0 mg/L BAP as cytokinin induced multiple shoots efficiently. Shoot induction was the most effective on MS medium supplemented with 4 mg/L $GA_3$ in yooza.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.280-283
• /
• 1995

In centrifugal barrel finishing, it is easy to establish the optimum working conditions for different workpieces. As they are adjusted in trial and error practically, production efficiency and quality are some- times low In the present paper, firstly, installation of the barrel finishing machine, finishing purpose and working conditions have been analyzed in order to eliminate the defects of the finished surface. Secondly, on the basis of this result, quantity of the water and selection of the media and the compound, etc. have been investigated. As a result, production efficiency and quality have been improved under the specified optimum working conditions. In addition, durability of the media and the compound has been tested experimentally. As a result, it was found that the expected life of the media is about 85 hrs and that of the compound is about 5 hrs. Besides high quality control has been achieved by newly proposed inspection at regular intervals.

• Microbiology and Biotechnology Letters
• /
• v.23 no.6
• /
• pp.747-754
• /
• 1995

E. coli growth is inhibited by organic acids produced in the broth. In order to reduce the inhibition, an electrodialysis unit was used. Model solutions (acetic acid plus distilled water or M-9 medium) were tested in the unit for investigating the optimum condition of current and voltage. Electrodialysis cultures were performed with the optimum condition where the highest current efficiency could be attained. The distilled water plus acetic acid gave us a higher current efficiency than the M-9 plus acetic acid. Electrodialysis efficiently removed acetic acid and so enhanced the specific growth rate of E. coli compared with the control experiment without clectrodialysis.

• KIEAE Journal
• /
• v.15 no.4
• /
• pp.5-11
• /
• 2015

Purpose: Recently, renewable energy system has been widely used to reduce the energy consumption and CO2 emission of building. A photovoltaic/thermal(PVT) system is a kind of efficient energy uses, which is combined with photovoltaic module and solar thermal collector. PVT system removes heat from PV module by through thermal fluid to raise the performance efficiency of the PV system. However, though PVT system has the merit of the improved efficiency in theoretical approach, there have been few performance analysis for PVT system using the dynamic energy simulation. In this study, in order to establish the optimum design method of this system, simulation was conducted by using individual system modules. Method: For the dynamic simulation, TRNSYS17 was used and local weather data was utilized. Furthermore, the system performance in various installation condition was calculated by case studies. Result: As a result, the amount of electric generation and heat production in each case was found by the simulation. The gap of system performance was also evident according to the installation condition.

• Journal of Aquaculture
• /
• v.12 no.2
• /
• pp.145-153
• /
• 1999

This study was conducted to determine the protein requirement of ayu (Plecoglossus altivelis). Two replicate groups of fish initially averaging 6.6 g were fed the five isocaloric diets containing different protein level from 29% to 57% in a flow-through freshwater system for 25 days. White fish meal was used as a sole protein source. Weight gain and feed efficiency of fish increased significantly with dietary protein level up to 43% (P＜0.05) with no additional response above this level. Protein and lipid retention, moisture, protein and lipid contents of body were not affected by dietary protein levels (P>0.05). Daily protein intake increased significantly with dietary protein level, whereas protein efficiency ratio of fish fed the 57% dietary protein decreased (P<0.05). The data obtained in this study indicate that a 43% dietary protein level could be recommended for the optimum growth of ayu.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.11
• /
• pp.817-823
• /
• 2008

A pin fin with variable fin base thickness is optimized based on the ratio of heat loss to the maximum heat loss using a two-dimensional analytic method. The temperature profile along the normalized radius position in the fin is presented. For fixed fin outer radius, the optimum heat loss, fin length and efficiency as a function of fin base thickness, outer radius, convection characteristic numbers ratio and ambient convection characteristic number are presented. One of the results shows that the effect of fin outer radius and ambient convection characteristic number on the optimum fin length is remarkable.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2013.12a
• /
• pp.60-65
• /
• 2013

Now days, the demands of new type hull lines and optimum design in relation with the EEDI (Energy Efficiency Design Index) regulation and eco-friendly high efficiency vessel design are mandatory clauses in Euro financial crises era. Therefore, in correlation with the above, we tried to find the optimum results and revealed the alterations of supporting structure for liftable car deck latch on PCTC. Generally, PCTC (Pure Car & Truck Carrier) design has been performed by 2 pillar space model F. E analysis without vehicle loads on liftable car deck to evaluate the structural adaptability. So, we applied mentioned vehicle loads on pillar and side transverse web on model to compare with not applied model and performed the ultimate strength analysis of improved design for the safety evaluation.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.1
• /
• pp.135-139
• /
• 2002

In this study, the experimental open-tube and close-tube thermoacoustic apparatuses were built. In order to determine the optimum length of resonant tube and the optimum length of stack, the resonant characteristics of thermoacoustic apparatuses were investigated, The length of resonant tube varies from 400mm to 850mm. The experimental frequency varies from 100Hz to 1000Hz. In case of the second and third harmonics, the maximum temperature difference of open-tube thermoacoustic apparatus is 53$^{\circ}C$ (resonator length: 400mm) and the maximum temperature difference of closed-tube thermoacoustic apparatus is 51$^{\circ}C$ (resonator length: 500mm). In the open-tube thermoacoustic apparatus, the peak efficiency point is about 2%, 55%, 69% in the resonant tube and in the closed-tube thermoacoustic apparatus, the peak efficiency point is about 2%, 41%, 50% in the resonant tube.