• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.4
• /
• pp.72-79
• /
• 1997

A study is a experiment which is figure out to optimum discharge cutting condition of the surface roughness, electronic discharging speed and electrode wear ration with Ton , Toff and V(voltage) as an input condition according to the current(Ip) in an electric spark machine : 1) Electrode is utilized Cu and Graphite. 2) Work piece is used the material of carbon steel. The condition of experiment is : 1) Current is varied 0.7(A) to 50(A) and the time of electric discharging to work piece in each time is 30(min) to 60(min). 2) After the upper side of work piece was measured in radius(5$\mu$m) of stylus analyzed the surface roughness to ade the table and graph of Rmax by yielding data. 3) Electro wear ratio is : \circled1Cooper was measured ex-machining and post-machining by the electronic balance. \circled2The ex-machining of graphite measured by it, the post-machining was found the data from volume $\times$specific gravity and analyzed to made its table and graph on ground the data. 4) In order to keep the accuracy of voltage affected to the work piece was equipped with the A.V. R and the memory scope was sticked to the electric spark machine. 5) In order to preserve the precision of current, to get rid of the noise occured by internal resistance of electric spark machine and to force injecting for the discharge fluid , it made the fixed table for a work piece to minimize the work error by means of one's failure during the electric discharging.

• Horticultural Science & Technology
• /
• v.29 no.5
• /
• pp.488-493
• /
• 2011

Callus culture initiation of strawberry (Fragaria${\times}$ananassa Duch.) was investigated at different Murashige and Skoog (MS) medium strengths, types and concentrations of plant growth regulators, and incorporating a cold pretreatment period to determine the optimal nutritional and environmental conditions. No high quality callus was induced on MS media without auxin regardless of medium strength. When 6-benzylaminopurine (BA) was combined with indole acetic acid (IAA), naphthalene acetic acid (NAA), and 2,4-dichlorophenoxyacetic acid (2,4-D), high quality callus were highly induced compared to medium supplemented with auxin alone. When $0.5mg{\cdot}L^{-1}$ BA was combined with IAA, NAA, and 2,4-D, high quality callus induction was more effective than the medium supplemented with the other BA concentrations. The best combination of auxin and cytokinin for high quality callus induction was $1.0mg{\cdot}L^{-1}$ NAA and $0.5mg{\cdot}L^{-1}$ BA. Although the differences in callus induction were not significant, high quality callus induction at half strength MS medium was more effective than at full strength medium. When $30g{\cdot}L^{-1}$ sucrose was added to the half strength MS medium, the rate of high quality callus induction increased. The optimum cold pretreatment temperature and period for high quality callus induction were $4^{\circ}C$ and 72 h, respectively. Regeneration rate of high quality callus increased in MS medium supplemented with thidiazuron.

• Resources Recycling
• /
• v.10 no.5
• /
• pp.16-21
• /
• 2001

Ultrafine $Mg(OH)l_2$and MgO powders were recovered from the waste solution containing $Mg^{++}$ which was a by-product of SHS (Self-propagating High temperature Synthesis)process. The optimum experimental conditions to prepare $Mg(OH)_2$were 13.0 of pH and 0.7M of $Mg^{++}$ content with addition of 9M of KOH as a pH regulator in acid leaching solution. Complete pre-cipitation of Mg(OH)$_2$from $Mg^{++}$ was realized at that condition. The dehydration reaction of the prepared Mg(OH)$_2$was studied by DSC, and the result was used for calcination process. In order to obtain MgO powder, dried Mg(OH)2 powder was calcined at $400~450^{\circ}C$. Particle size and shape of the prepared $Mg(OH)_2$and MgO powder was similar to those of the commercial powders.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.3
• /
• pp.283-287
• /
• 1992

This experiment was carried in order to compare some propagation methods and the effective components in the root of Paeonia albiflora pallas, Paeonia moutan Sims and Paeonia albiflora pallas root grafted with Paeonia mouton sims The optimum seeding time of August 20 to september 10 for increasing germination ratio. The growing and developing of Paeonia albiflora Pall. for root dividing methods was advantageous to practice at Autum than at spring season. The shoot cutting method during the flowering time was proper to increase the rooting ratio with the aid of Ruton, the plant growth regulator but not emerged of apical bud. The grafting stages between the Paeonia albiflora pall. and Paeonia moutan Sims was available to practice during the September for increasing the thickness growth of root. Among the effective components of the paeony the paeoniflorin was shown high, while paeonol in paeony moutan. The paeoniflorin of herbaceous paeony / paeony moutan was increased about 75.9% than herbaceous paeony alone, and the other compoents are similar to those of herbaceous paeony root.

• The Journal of the Korea Contents Association
• /
• v.17 no.11
• /
• pp.588-599
• /
• 2017

This paper analyzes internet access model between ISP, CP and end users where CP uses various technologies to provide direct access to ISP owning subscribers to consume its own contents in low cost and high quality. The level of access charge depends on the competitiveness of CP market. When CP market is perfect competitive, the level of access charge is identical to that of social optimum while when CP market is monopoly, the level of access charge is influenced by the sensitivity of the contents price to access charge for CP. The dead weight loss due to monopoly market in CP can be removed by the regulation of access charge. Socially optimal access charge in monopoly market of CP is lower than that in competitive market. This is because the regulator wants to set access price to lower level to reduce welfare loss from monopoly in CP market where CP determines the price to over marginal cost.

• Korean Journal of Microbiology
• /
• v.48 no.2
• /
• pp.57-65
• /
• 2012

Phosphorous is an essential element for the synthesis of various biomolecules including phospholipids, carbohydrates and nucleic acids. Bacterial cells can uptake it as forms of phosphate and phosphate-containing nutrients from extracellular environments, and reserve extra phosphate to polyphosphate inside the cell. Among five phosphate transport systems, Pst plays central roles in phosphate transport, and its expression is coordinated by the regulation of PhoB-PhoR two component signal transduction system in response to extracellular levels of phosphate. Genomic studies on the response regulator PhoB reveal many genes independent of phosphate metabolism. Based on recent findings on phenotypes of bacteria lacking proper function of each phosphate transport system, this review discusses roles of phosphate transporters in maintaining optimum intracellular phosphate levels, and presents diverse phenotypes of phosphate transporters related with other environmental signals as well as phosphate, then finally points out functional redundancy among phosphate transport systems or their regulators, which emphasize importance of phosphate homeostasis in governing metabolism, adaptation, and virulence of bacteria.

• The korean journal of orthodontics
• /
• v.33 no.4 s.99
• /
• pp.247-257
• /
• 2003

Various methods have been used on patients with skeletal Class II division 1 malocclusion. The activator, Frankel appliance, headgear, Herbst appliance, and Twin-block appliance are some examples. The ideal treatment effect using these appliances would be to inhibit horizontal and vertical growth of the maxilla while promoting mandibular growth and obtaining optimum dentition. The Teuscher appliance has a simultaneous combined headgear effect with maxillary growth inhibition and an activator effect with mandibular growth promotion. The purpose of this study was to examine how well these effects were clinically obtained and the results are as follows. 1. The forward growth of the maxilla was effectively inhibited. 2. The downward-forward growth of the maxillary dentoalveolar complex was inhibited. 3. Growth promotion of the mandible was not observed. 4. The overjet, overbite, molar key were effectively improved. 5. The protruded upper lip and facial profile were unproved.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.139-145
• /
• 1973

Effects of Choline Chloride on growth and yields of sweet-potato cultivated with the single crop and after-barley crop were summarized as follows. 1. The greatest effect was obtained when the sprout-bases of sweet potato were soaked in the solution of Choline Chloride for 24 hours, while the optimum concentration of Choline Chloride was 32.3ppm in case of single crop and 31.1ppm in after barley crop respectively. 2. Choline Chloride restrained the growth of stem; the length shortened and the dry weight decreased. 3. The number of tubers and yields were increased by treating choline chloride. It may be thought that the translocations of assimilation substance from leaves and stem to tubers, was stimulated by treating choline chloride. The tendancy of higher yielding was shown in the early harvesting than in the usual harvesting 4. Sugar and starch content were higher, crude fiber and crude protein content were lower as compared with the control.

• Journal of Microbiology and Biotechnology
• /
• v.1 no.2
• /
• pp.142-149
• /
• 1991

Gardenia callus was induced in MS medium containing $10{\;}{\mu}M$ of 2,4 diphenoxy acetic acid (2,4-D), $1{\;}{\mu}M$ kinetin, and 3% sucrose in the dark. $B_5$ medium was identified to be the most adequate medium for cell growth. Indole-3-acetic acid (IAA) was better growth regulator than 2,4-D not only for cell growth but slso for carotenoid production. Ligt also played a critical role on synthesis of carotenoid. Gardenia cells grown in $B_5$ medium could utilize a polysaccharide, soluble starch, as a carbon source. The cell growth was stimulated in $B_5$ medium fortified with 0.2% yeast extract. The optimum pH for cell growth was 5.7. High density cultures can be maintained by increasing inoculum size and medium concentration accordingly. Specific growth rate and mass doubling time were 0.095 $day^{-1}$ and 7.3 days, respectively. The cell immobilized in alginate tends to formulate more enlarged vacuoles containing yellow pigment compared with those of suspended cell. Carotenoid content of immobilized cell was about $264.4{\;}{\mu}g/g$ fresh weight (F.W.) corresponding twice of the content of suspended cell ($112.08{\;}{\mu}g/g$ F.W.). The color of gardenia cell was shifted from yellow to red when carbohydrase-secreting fungus, Trichoderma reesei, was co-cultivated with gardenia cells.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.6_1
• /
• pp.545-555
• /
• 2007

3D buildings are the most prominent feature comprising urban scene. A few of mega-cities in the globe are virtually reconstructed in photo-realistic 3D models, which becomes accessible by the public through the state-of-the-art online mapping services. A lot of research efforts have been made to develop automatic reconstruction technique of large-scale 3D building models from remotely sensed data. However, existing methods still produce irregular building polygons due to errors induced partly by uncalibrated sensor system, scene complexity and partly inappropriate sensor resolution to observed object scales. Thus, a geometric regularization technique is urgently required to rectify such irregular building polygons that are quickly captured from low sensory data. This paper aims to develop a new method for regularizing noise building outlines extracted from airborne LiDAR data, and to evaluate its performance in comparison with existing methods. These include Douglas-Peucker's polyline simplication, total least-squared adjustment, model hypothesis-verification, and rule-based rectification. Based on Minimum Description Length (MDL) principal, a new objective function, Geometric Minimum Description Length (GMDL), to regularize geometric noises is introduced to enhance the repetition of identical line directionality, regular angle transition and to minimize the number of vertices used. After generating hypothetical regularized models, a global optimum of the geometric regularity is achieved by verifying the entire solution space. A comparative evaluation of the proposed geometric regulator is conducted using both simulated and real building vectors with various levels of noise. The results show that the GMDL outperforms the selected existing algorithms at the most of noise levels.