• 생명과학회지
• /
• 제20권11호
• /
• pp.1729-1737
• /
• 2010

본 연구는 양파즙을 이용하여 가축 사료첨가제용 Lactobacillus plantarum의 배양 최적화를 위하여 수행되었다. 양파즙의 첨가수준이 균체성장과 항산화 활성에 미치는 영향을 평가하였을 때, 그 첨가수준이 증가할수록 모두 높아졌다. 양파즙, 설탕 그리고 yeast extract를 배지성분요인으로 선택하였고, 배지 내 성분요인들의 혼합비율에 의한 효과를 평가하였다. 24 개의 실험들로 구성된 완전 요인 배치법을 이용하여 요인들의 주효과와 상호작용을 조사하였다. 균체성장과 항산화 활성에 대한 유의성 있는 긍정적 주효과는 각각 yeast extract와 양파즙에서 나타났다. 유의적인 상호작용으로는 항산화 활성에 대하여 설탕와 yeast extract 사이에서 나타났다. 최종적으로 양파 600 g/l, 설탕 15 g/l 및 효모추출물 5 g/l의 최적 배지조성을 선발하였다. 얻어진 최적배지의 효율을 분석하기 위하여 5 l 발효기를 이용하여 평가한 결과 최대 균체 성장량은 배양 12시간째에 $9.7\;{\log}_{10}$ (CFU/ml)로 나타났다. 배양 마지막인 20시간 때에는 $8.9\;{\log}_{10}$ (CFU/ml)의 균체 성장량을 보였으며 이는 예측된 $9.01\;{\log}_{10}$ (CFU/ml)과 매우 유사한 결과였다. 배양액의 항산화 활성은 모든 배양 시간대에서 약 60~65%로 유지되었으며, 이것은 예측된 값(47.1%)보다 훨씬 우수하였다.

• 한국환경과학회지
• /
• 제30권8호
• /
• pp.659-671
• /
• 2021

The physicochemical properties of soil and the yield and quality of rice (Oryza sativa L. cv. Sailmi) were assessed using Italian ryegrass (Lolium multiflorum Lam. cv. Kowinearly)-rice double cropping systems in the paddy fields at Goseong and Miryang in southern Korea. The average temperatures during the ripening period were approximately 1 ℃ higher than the optimal temperature for rice ripening and the sunshine duration was reduced by frequent rainfall. Consequently, it was slightly below the optimal conditions required for rice ripening. In the soil at Goseong, winter Italian ryegrass cropping increased the pH, electrical conductivity, and the contents of organic matter, total nitrogen (T-N), available P₂O₅, K, Ca, and Mg than winter fallowing. Particularly, the contents of T-N and available P₂O₅increased significantly. In the soil at Miryang, Italian ryegrass slightly increased the electrical conductivity and the T-N, Mg, and Na contents. Therefore, winter Italian ryegrass cropping improved the physicochemical properties of paddy soils; however, Italian ryegrass-rice double cropping slightly reduced the culm length at both Goseong and Miryang, without markedly changing the panicle length or number compared to fallow-rice cropping. Furthermore, at Goseong, Italian ryegrass-rice double cropping slightly decreased the spikelet number and milled rice yield, and increased the ripened grain rate; however, at Miryang, contrasting results were observed. In addition, fallow-rice cropping revealed no differences in the head rice or opaque rice rates. The protein content was slightly increased in Italian ryegrass-rice double cropping, without significant changes in the amylose content or Toyo value, compared to that in fallow-rice cropping. The peak and breakdown viscosities were slightly decreased. These results indicate that winter Italian ryegrass cropping might alter rice taste but may not exhibit remarkable negative effects on rice cultivation. Therefore, Italian ryegrass-rice double cropping system is recommended for paddy fields in southern Korea. Nevertheless, to increase the rice yield and quality, fertilization standards for rice cropping that consider the changes in the T-N and organic matter contents in paddy fields caused by winter Italian ryegrass cropping need to be established.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2023년도 임시총회 및 춘계학술대회
• /
• pp.25-25
• /
• 2023

As the demand for processing potatoes increases, imports of raw potatoes and potato products are increasing, so it is necessary to expand potato production as raw materials for processing in Korea. Potato varieties for processing that can be grown in fall have been developed, but research on cultivation technology and processing quality management technology to improve chip processing quality is very insufficient. Therefore, this study was conducted to investigate the optimal harvest time by investigating the quantity and chipping characteristics of potato chips during autumn cultivation. As the test varieties, the chip processing varieties "Saebong", "Eunsun", and "Geumnaru" were used, and the potato cultivation site was the Seocheon-gun Test field (214 Gaeya-ri) of the Chungcheongnam-do. The test treatment was at harvest time after spring cultivation, and the potatoes were harvested at 70, 80, 90, and 100 days after sowing based on the sowing time. The investigation items were potato productivity (total yield, yield of standard processing, and number of tubers) and chip-processing characteristics (chip color, dry matter content, glucose content, etc.). As a result of examining the yield characteristics according to the harvest time, statistical significance was not found according to the treatment. The total yield (ton/ha) was 27.5 to 30.5, and there was no significant difference depending on the time of 70 to 100 days after harvest. The standard quantity for processing (yield of 81-250g potatoes per unit) also showed a similar trend. In chipping characteristics according to harvest time, statistical significance was high in specific gravity and glucose content. The specific gravity was highest at 1.077 at 70 days after harvest, and the glucose (mg/dL) content was the lowest at 37.5 at 80 days after harvest. Statistical significance was not recognized, but chip color (L value) was the highest at 64.4 at 70 days after harvest. Therefore, it is judged that the optimal harvesting time for chip processing is 70 to 80 days after sowing.

• Water Engineering Research
• /
• 제1권1호
• /
• pp.63-74
• /
• 2000

This paper presents a two- phase search scheme for optimal pipe expansion of expansion of existing water distribution systems. In pipe network problems, link flows affect the total cost of the system because the link flows are not uniquely determined for various pipe diameters. The two-phase search scheme based on stochastic optimization scheme is suggested to determine the optimal link flows which make the optimal design of existing pipe network. A sample pipe network is employed to test the proposed method. Once the best tree network is obtained, the link flows are perturbed to find a near global optimum over the whole feasible region. It should be noted that in the perturbation stage the loop flows obtained form the sample existing network are employed as the initial loop flows of the proposed method. It has been also found that the relationship of cost-hydraulic gradient for pipe expansion of existing network affects the total cost of the sample network. The results show that the proposed method can yield a lower cost design than the conventional design method and that the proposed method can be efficiently used to design the pipe expansion of existing water distribution systems.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.348-352
• /
• 2002

a basis such as IT(Information Technology), NT(Nano Technology) and BT(Bio Technology). Recently, NT is applied to various fields that are composed of science, industry, media and semiconductor-micro technology. It has need of IT that is ultra-precision positioning technology with strokes of many hundreds mm and maintenance of nm precision in fields of ultra micro process, ultra precision measurement, photo communication part and photo magnetic memory. This thesis represents optimal design on ultra-precision positioning with single plane X-Y stage and development of artificial control system for adequacy of industrial demand. Also, dynamic simulation on global stage is performed by using ADAMS (Automated Dynamic Analysis of Mechanical System) for the purpose of grasping dynamic characteristic on user designed X-Y global stage. The error between displacements from micro stage and from FEM(Finite Element Method) is 3.53% by verifications of stability on micro stage and control performance. As maximum Von-mises stress on hinge of micro stage is 5.981kg/mm$^2$ that is 1.5% of yield stress, stability on hinge is secured. Preparing previous results, optimal design of micro stage can be possible, and reliance of results with FEM can be secured.

• 한국농공학회지
• /
• 제39권2호
• /
• pp.9-18
• /
• 1997

Abstract This paper presents a heuristic method for optimal design of water distribution system with multiple sources and potential links. In multiple source pipe network, supply rate at each source node affects the total cost of the system because supply rates are not uniquely determined. The Linear Minimum Cost Flow (LMCF) model may be used to a large scale pipe network with multiple sources to determine supply rate at each source node. In this study the heuristic method based on the LMCF is suggested to determine supply rate at each source node and then to optimize the given layout. The heuristic method in turn perturbs links in the longest path of the network to obtain the supply rates which make the optimal design of the pipe network. Once the best tree network is obtained, the frequency count of reconnecting links by considering link failure is in turn applied to form loop to enhance the reliability of the best tree network. A sample pipe network is employed to test the proposed method. The results show that the proposed method can yield a lower cost design than the LMCF alone and that the proposed method can be efficiently used to design irrigation systems or rural water distribution systems.

• Steel and Composite Structures
• /
• 제15권5호
• /
• pp.519-538
• /
• 2013

The design optimization of a cold-formed steel portal frame building is considered in this paper. The proposed genetic algorithm (GA) optimizer considers both topology (i.e., frame spacing and pitch) and cross-sectional sizes of the main structural members as the decision variables. Previous GAs in the literature were characterized by poor convergence, including slow progress, that usually results in excessive computation times and/or frequent failure to achieve an optimal or near-optimal solution. This is the main issue addressed in this paper. In an effort to improve the performance of the conventional GA, a niching strategy is presented that is shown to be an effective means of enhancing the dissimilarity of the solutions in each generation of the GA. Thus, population diversity is maintained and premature convergence is reduced significantly. Through benchmark examples, it is shown that the efficient GA proposed generates optimal solutions more consistently. A parametric study was carried out, and the results included. They show significant variation in the optimal topology in terms of pitch and frame spacing for a range of typical column heights. They also show that the optimized design achieved large savings based on the cost of the main structural elements; the inclusion of knee braces at the eaves yield further savings in cost, that are significant.

• 한국식품영양학회지
• /
• 제10권2호
• /
• pp.241-245
• /
• 1997

천연식용색소를 제조하기 위하여 치자를 이용하여 색소추출의 최적조건과 황색 4호와의 내열성 및 내광성을 조사하였다. 에탄올을 추출용매로 사용한 경우 색소추출 최적조건은 추출온도 4$0^{\circ}C$, 추출시간 42시간, 추출 pH 7.0 및 기질농도 10%였다. 물추출의 경우 추출온도는 7$0^{\circ}C$, 추출시간 48시간, 추출 pH 7.0 및 기질농도 10%였다. 최적조건에서의 추출수율은 에탄올의 경우 75%였고, 물추출의 경우는 63%로 나타났다. 황색 4호와 치자 황색소의 내열성 및 내광성을 비교 검토한 결과, 황색 4호는 내열성과 내광성이 모두 98% 이상으로 나타났으나, 치자 황색소의 경우는 내열성은 62%, 내광성은 90%로 나타났다.

• 소성∙가공
• /
• 제8권5호
• /
• pp.471-481
• /
• 1999

The properties of deformed products are generally dependent upon the distribution of microstureture. It is, therefore, necessary to make the distribution of microstureture uniform in order to achieve the best balance of properties in the final product. This is often a demanding task, even for conventional materials. It is become essential to achieving mechanical integrity and a desired combination of microstructure and properties. The objective mechanical integrity and a desired combination of microsttucture and properties. The objective of this study is to design the optimal die profile which can yield more uniform microstructure in hot extruded product. The microstructure evolution, such as dynamic and static recrystallization as well as grain growth, is investigated using the program com-bined with yada and Senuma's empirical equations and rigid-thermoviscoplastic finite element method. The die profile of hot extrusion is represented by Bezier-curve to define all available profile. In order to obtain the optimal die profile which yields uniform microstructure in the product the FPS(Flexible Polyhedron Search) method is applied to the present study. To validate the result of present study the experimental hot extrusion is performed and the result is compared with that of simulation.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권5호
• /
• pp.125-132
• /
• 2008

구조최적화는 최근 CAD와 컴퓨터 기술이 발전하면서 구조설계부분에 널리 이용되고 있다. 본 연구에서는 30층의 강구조물을 대상으로 유한요소해석 및 어댑티브 시뮬레이티드 어닐링 알고리즘을 이용하여 최적중량설계를 구현하였다. 최적설계는 모든 설계상수와 설계하중들이 주어졌을 때, 목적함수가 최소로 됨과 동시에 모든 설계제약조건을 만족시키는 설계변수를 결정하는 설계법이라고 정의할 수 있다. 최적설계 구현을 통해 건설 측면에 있어 성능 향상과 신뢰도 향상 효과를 가져 올 수 있을 것이다.