• Resources Recycling
• /
• v.19 no.1
• /
• pp.40-48
• /
• 2010

It was investigated that effects of NaOH concentration on synthesis of mesoporous materials using municipal solid waste incinerator ash slag (MSWI-ash slag). In order to increase the purity and maximize the amount of extracted Si content the raw MSWI-ash slag was mechanically activated. Extraction of Si from the MSWI-ash slag was carried out by alkali treatment using concentrated NaOH solution, which varied from 1M to 4M. Physical properties (i.e., pore size, specific surface area and total pore volume) of the synthesized mesoporous silica were also evaluated as a function of NaOH concentration via BET, SEM, TEM and small-angle X-ray scattering analyses. Over the entire range of NaOH concentration investigated (i.e., 1-4M), the synthesized mesoporous materials were determined to be SBA-15, which exhibited a hexagonal structure with the pore size of approximately 7 nm. On the other hand, specific surface area and total pore volume increased with NaOH concentration up to 3M while the values decreased at 4M, indicating that the optimal NaOH concentration for the synthesized mesoporous silica was approximately 3M. Further comparison analysis between two conditions (3M versus 4M) showed that the decrease in two physical properties at 4M NaOH concentration was likely due to the potential inhibition by excess Na ions on the formation of mesophase and the consequent increase of pore wall thickness by remaining Si ions.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.1
• /
• pp.103-111
• /
• 2000

Ozonation and advanced oxidation($H_2O_2/O_3$) process were investigated under various experimental conditions to improve the efficiency of biological filter used for the treatment of recycled wastewater from aquaculture. Ammonia removal followed the first-order reaction whose reaction rate constant(k) was $2.0{\times}10^{-2}min^{-1}$ in ozonation. The ammonia removal rate increased according as the bicarbonate alkalinity is increased. About 46% $NH_3$ was oxidized by ozone at 200 mg/L as $CaCO_3$. When alkalinity existed in wastewater, ammonia removal rate by advanced oxidation was very low due to the inhibition effect of bicarbonate. However, when initial pH was adjusted to about 8.2 by 0.1 N KOH, ammonia removal rate was improved higher than that by ozonation. Especially. ammonia removal rate was the highest at $H_2O_2/O_3$ of 0.25 and about 90% of ammonia was removed in 30 min at this ratio as pH was maintained over 9. In the case of wastewater containing ammonia and organic constituents, ammonia removal efficiency by both ozonation and advanced oxidation decreased seriously because organic constituents consumed the oxidant faster than ammonia. In addition the optimal $H_2O_2/O_3$ ratio was changed. Like ammonia removal, DOC(dissolved organic carbon) increased for first 10 min and then decreased slowly because the particulate organic constituents were oxidized rapidly and then produce DOC. Even when the ammonia concentration by twice, oxidation of DOC was not retarded.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.10
• /
• pp.957-964
• /
• 2010

The deactivated catalyzed diesel particulate filter-trap (DPF) was remanufactured by ultrasonic wave treatment with various prepared solutions, followed by active component re-impregnation, and the emission control performance and surface properties of remanufactured DPF were studied at various remanufacturing conditions. The proper ultrasonic wave cleaning time at various prepared solutions and optimal re-impregnation amounts of active component for the best emission control performance of DPF were investigated and its performance tests were also carried out with various temperatures for the conversions of CO, THC (total hydrocarbon) and PM (particulate matter) by catalytic reaction test unit using bypass gas from the diesel engine dynamo system. It was found that the emission control performance of DPF remanufactured with the high-temperature air washing, ultrasonic wave cleaning at acid/base solutions and active component re-impregnation method was recovered to 95% level of its activity compared to that of the fresh DPF, which was caused by removing the deactivating materials from the surface of the DPF, through the analyses of performance test and their surface characterization by Optical microscope, EDX, ICP, TGA, and porosimeter.

• Resources Recycling
• /
• v.7 no.3
• /
• pp.11-16
• /
• 1998

Simulated waste liquid containing 50 ppm cobalt ion was t$\xi$sted by precipitate flotation using a sodium lauryl sulfate as a c collector. The effects of initial cobalt ion concentration, pH, surfactant concentration, flotation time, gas flow rate and foreign i ions on removal efficiency of cobalt ion were studied. Pretreatment of the waste liquid with 35% $H_2O_2$, prior to precipitate f flotation made shin of optimal flotation pH from the strong alkalinity to weak alkaline range and made a favorable flotation of c cobalt ion in wide range of pH. For the result of this experiment, 99.8% removal efficiency was obtained on the conditions of initial coball ion concentration 50 ppm, pH 9.5 gas flow rate 70 mllmin, flotation time 30 min. The simulate ion was fanned t to be the most harmful ion against removal of cobalt by precipitate flotation of the species which were tested The presence of 0.1 M of $SO_4^{2-}$ ion decreased remo,때 $\xi$폐iciency of cobalt to 90% while the cobalt were almost entirely removed in the a absence of sulfate ion.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.2
• /
• pp.61-67
• /
• 2001

Using mature seed-derived callus, optimal conditions for efficient callus growth and plant regeneration, and regeneration efficiency by callus type were investigated in zoysiagrass (Zoysia japonica steud.). Callus induction was highest when the seeds were cultured on MS medium containing 2 mg/L 2,4-D, 0.2 mg/L BAP, 4 mg/L thiamine-HCl and 100 mg/L $\alpha$-ketoglutaric acid. Callus growth was highest when callus were cultured on MS medium containing 0.5 mg/L 2,4-D, 0.05 mg/L BAP, 4 mg/L thiamine-HCl and 100 mg/L $\alpha$-ketoglutaric acid. Plant regeneration was highest when callus was transferred on MS medium containing 3% maltose and 1 mg/L BAP, or 1 mg/L thidiazuron (TDZ). The combinations and concentrations of 2,4-D and BAP were shown to be critical factors for both the frequency and the type of callus. And four morphologically distinct types of callus were induced from the 2,4-D and BAP treatment. Type I,II and III calli produced shoots upon subculture, while the watery callus, type IV produced roots without shoots. Of four types of callus, type I exhibited the maximum frequency (82%) of shoot regeneration and the minimum frequency (4%) of albinism.

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.4
• /
• pp.475-483
• /
• 2019

The use of stem cells in cell-based therapy has attracted extensive interest in the field of regenerative medicine, and it has been applied to numerous incurable diseases due to the inherent abilities of self-renewal and differentiation. However, there still exist some severe obstacles, such as requirement of cell expansion before the treatment, and low survival at the treated site. To overcome these disadvantages of stem cells, we used the carcinoembryonic antigen-related cell adhesion molecule 6 (CEACAM 6) gene, which functions to increase cell-cell interaction as well as anti-apoptosis. We first confirmed whether CEACAM 6 is expressed in various cell lines at the protein level (including in stem cells), followed by evaluating and selecting the optimal transfection conditions into stem cells. The CEACAM 6 gene was transfected into stem cells to prolong cell survival and preserve from damage by oxidative stress. After confirming the CEACAM 6 expression in transfected stem cells, the cell survival was assessed under oxidative condition by exposing to hydrogen peroxide (H₂O₂) to mimic the chronic environment-induced cellular damage. CEACAM 6 expressing stem cells show increased cell viability compared to the non-CEACAM 6 expressing cells. We propose that the application of the CEACAM 6 gene is a potential option, capable of expanding and enhancing the therapeutic effects of stem cells.

• Korean Journal of Food Science and Technology
• /
• v.34 no.4
• /
• pp.661-665
• /
• 2002

In order to develop ginseng tea powder with spore forming lactic acid bacteria Lactobacillus sporogenes was used. In the jar fermentor experiment under optimal culture conditions, the number of spore of L. sporogenes reached about $20{\times}10^8\;CFU/mL$ and sporulation rate was 97%. Granulated ginseng tea was made from glucose 7 kg, lactose 2 kg, ginseng extract 1 kg and spores 5 g $(5200{\times}10^8\;CFU/g)$. In the treatment of artificial gastric juice (pH 3.0) for 4 h and artificial bile for 8 h, the survival rate of spores in the granulated ginseng tea was 55.4% and 90.0% respectively. The spores survived 77.6% after incubation for 20 min in boiled water. Its storage stability was about 75% for 12 months at room temperature.

• Journal of Life Science
• /
• v.31 no.1
• /
• pp.47-51
• /
• 2021

In today's society, functional whitening cosmetics are important to beauty. Fungi are known to produce a variety of whitening-related metabolites. In this study, we searched for tyrosinase inhibitors with metabolic products derived from Trichoderma atroviride supernatant in order to apply a material for whitening functional cosmetics. In addition, the inhibitory effect was compared to arbutin, which has already been approved as a whitening raw material by the Korea Ministry of Food and Drug Safety (KMFDS). The metabolites from the T. atroviride supernatant showed higher tyrosinase inhibitory activity than that of arbutin. Some of the tyrosinase inhibitors were stable to heat, whereas some were unstable. The heat unstable material was exhibited in the case of samples treated with little amounts, such as 0.02~0.2%. They were very unstable in acidic and alkali pHs, especially under acidic conditions. However, it was found that a weakly-acidic to neutral pH range was the optimal working pH, especially neutral pH. Since the activity of the inhibitory substances in the T. atroviride supernatant was maintained regardless of proteinase K treatment, it was assumed that the metabolites, but not the bioactive peptides, were involved in the activity. In summary, we propose that the metabolites derived from T. atroviride supernatant have strong potential as whitening raw material.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.4
• /
• pp.19-32
• /
• 2021

In this study, evaluation and consideration of domestic/overseas design, construction, and quality control performed by the authors on the deep cement mixing method were performed, and improvements for the development of the DCM method were suggested in the future. As a result of this study, it was found that the cross-sectional area correction for strength is required during the laboratory test of mix proportion, and caution is required because the extrapolation method may lead to different results from the actual one. Applicable design methods should be selected in consideration of both the improvement ratio and the type of improvement during design, and it was confirmed that the allowable compressive strength to which the safety factor was applied refers to the standard value for stability review and not the design parameters. In the case of the stress concentration ratio, rather than applying a conventional value, it was possible to perform economical design by calculating the experimental and theoretical stress concentration ratio reflecting the design conditions. In the case where pre-boring is expected during construction, if the increased water content is not large compared to the original, there were cases where a major problem did not occur even if the result that did not consider the increase in water content was used. In addition, it was confirmed that when the ratio of the top treatment length to the improved length is high, a small amount of design cement contents per unit length can be injected during construction. In the case of quality control, it was evaluated that D/4~2D/4 for single-axis and D/4 point for multi-axis were optimal for coring of grouting mixtures. As an item for quality control, it is judged that the standard that considers the TCR along with the unconfined compressive strength of grouting mixtures is more suitable for the domestic situation.

• Journal of Internet Computing and Services
• /
• v.23 no.3
• /
• pp.35-45
• /
• 2022

Even in recent years, treatment of first-aid patients is still often delayed due to a shortage of medical resources in marginalized areas. Research on automating the analysis of medical data to solve the problems of inaccessibility for medical services and shortage of medical personnel is ongoing. Computer vision-based medical inspection automation requires a lot of cost in data collection and labeling for training purposes. These problems stand out in the works of classifying lesion that are rare, or pathological features and pathogenesis that are difficult to clearly define visually. Anomaly detection is attracting as a method that can significantly reduce the cost of data collection by adopting an unsupervised learning strategy. In this paper, we propose methods for detecting abnormal images on chest X-RAY images as follows based on existing anomaly detection techniques. (1) Normalize the brightness range of medical images resampled as optimal resolution. (2) Some feature vectors with high representative power are selected in set of patch features extracted as intermediate-level from lesion-free images. (3) Measure the difference from the feature vectors of lesion-free data selected based on the nearest neighbor search algorithm. The proposed system can simultaneously perform anomaly classification and localization for each image. In this paper, the anomaly detection performance of the proposed system for chest X-RAY images of PA projection is measured and presented by detailed conditions. We demonstrate effect of anomaly detection for medical images by showing 0.705 classification AUROC for random subset extracted from the PadChest dataset. The proposed system can be usefully used to improve the clinical diagnosis workflow of medical institutions, and can effectively support early diagnosis in medically poor area.