• YAKHAK HOEJI
• /
• v.54 no.2
• /
• pp.106-111
• /
• 2010

The chemical structures of eight compounds purified from two plants (Polygala tenuifolia Willdenow and Dioscorea batatas Decene) were determined and their anti-microbial activity against three microbial strains (Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans) was tested. The three micro organisms were cultured in 96-well plates or Petri dishes without (control) or with the eight compounds added at concentrations of 100 to 0.01 ${\mu}M$ (wt/vol). The growth of the microorganisms in the medium was examined after a 24-h incubation. The inhibitory effect of each compound on the growth of the microorganisms was calculated from the optical density measured at 595 nm, turbidity, and size of the inhibition zone around the treated paper disc. The minimum inhiitory concentration (MIC) of compounds 4 to 7 against S. aureus was 0.08, 0.05, 1.3 and 0.02 ${\mu}M$, respectively, and 0.09, 0.1, 0.2 and 100 ${\mu}M$ against C. albicans. The $IC_{50}$ (50% inhibition) values of compounds 5 and 6 were 3.1 and 6.4 ${\mu}M$ against S. aureus, respectively, and 10 and 2.4 ${\mu}M$ against C. albicans. Therefore, compounds 4 to 6 were the most potent anti-microbial agents among the eight compounds tested.

• Journal of the Korean Institute of Rural Architecture
• /
• v.21 no.3
• /
• pp.17-24
• /
• 2019

This study aimed to develop a mobile separating and sorting device for discharge sites to separate and sort mixed construction waste generated in small and medium scale in small provincial cities into inorganic materials and combustible materials. The study results can be summarized as follows: 1) As a result of analyzing the existing domestic technology for the separating and sorting mixed construction waste, a device sorting the waste by fusing the vibration screen, disc screen, air blowing methods and the separating and sorting the combustible waste is applied in Korea. 2) In foreign countries, the air blowing, screen, gravity sorters are used for separating and sorting combustible waste in the same way as in Korea. Especially German T Company suggests a construction waste separating and sorting system using an optical sorter. 3) As for the test device for separating and sorting mixed construction waste to be buried in landfill, the processing capacity was set as 16 tons per day. 4) For separating and sorting inorganic materials by granularity, this study set a trommel with two types of diameter as a basic. To operate the mobile all-in-one system, the device is designed to locate a conveyor, a combustible waste conveying device, inside of the trommel. 5) The device is designed in a mobile mode under the concept of primary separating and sorting device, and it can be transported using a 2.5-ton truck minimum. The diameter and length of the trommel are designed to be within 1500mm and 3000mm, respectively. In a further study, an optimized separating and sorting technology is planned to be presented through an experimental study for processing efficiency analysis at the mixed construction waste site by manufacturing the pilot experiment facility reflecting the design elements in the result of this study.

• Restorative Dentistry and Endodontics
• /
• v.47 no.4
• /
• pp.43.1-43.13
• /
• 2022

Objectives: This study compared the surface gloss (SG), gloss retention (GR), and color stability (CS) of 2 universal resin composites after chemical (CA) and mechanical (MA) aging. Materials and Methods: Twenty disc-shaped samples of G-ænial A'Chord (GC-Europe) and Filtek Universal (3M-ESPE) were polished with sequential abrasive papers. For CA, specimens were stored in 1 mL of 75% ethanol for 15 days at 37℃, and readings (SG, GR, and CS) were obtained at baseline and 5, 10, and 15 days. For MA, specimens were subjected to 10,750 simulated brushing cycles. SG and CS were evaluated after every 3,583 cycles. SG was measured with a glossmeter (geometrical configuration: 60°), and values were expressed in gloss units. Color was measured with a spectrophotometer using the CIE-L^*a^*b^* color system. The Student's t-test, 1-way analysis of variance, and Scheffé test were used for statistical analysis (α = 0.05). Results: G-ænial presented significantly higher SG values than Filtek (p = 0.02), with GR reductions of 5.2% (CA) and 5.3% (MA) for G-ænial and 7.6% (CA) and 7.2% (MA) for Filtek. The aging protocol had no statistically significant effect on SG or GR (p = 0.25) from baseline to the final readings. G-ænial-MA presented the lowest color difference (ΔE = 1.8), and G-ænial-CA and Filtek-CA had the largest changes (ΔE = 8.6 and ΔE = 11.8, respectively). Conclusion: G-ænial presented higher SG values and better CS. Both restorative materials demonstrated acceptable GR and CS. Aging protocols impacted these properties negatively.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.4
• /
• pp.485-493
• /
• 2013

PURPOSE. To evaluate the effects of surface treatments on shear bond strength (SBS) between microwave and conventionally sintered zirconia core/veneers. MATERIALS AND METHODS. 96 disc shaped Noritake Alliance zirconia specimens were fabricated using YenaDent CAM unit and were divided in 2 groups with respect to microwave or conventional methods (n=48/group). Surface roughness (Ra) evaluation was made with a profilometer on randomly selected microwave (n=10) and conventionally sintered (n=10) cores. Specimens were then assessed into 4 subgroups according to surface treatments applied (n=12/group). Groups for microwave (M) and conventionally (C) sintered core specimens were as follows; $M_C$,$C_C$: untreated (control group), $M_1,C_1:Al_2O_3$ sandblasting, $M_2,C_2$:liner, $M_3,C_3:Al_2O_3$ sandblasting followed by liner. Veneer ceramic was fired on zirconia cores and specimens were thermocycled (6000 cycles between $5^{\circ}-55^{\circ}C$). All specimens were subjected to SBS test using a universal testing machine at 0.5 mm/min, failure were evaluated under an optical microscope. Data were statistically analyzed using Shapiro Wilk, Levene, Post-hoc Tukey HSD and Student's t tests, Two-Way-Variance- Analysis and One-Way-Variance-Analysis (${\alpha}$=.05). RESULTS. Conventionally sintered specimens ($1.06{\pm}0.32{\mu}m$) showed rougher surfaces compared to microwave sintered ones ($0.76{\pm}0.32{\mu}m$)(P=.046), however, no correlation was found between SBS and surface roughness (r=-0.109, P=.658). The statistical comparison of the shear bond strengths of $C_3$ and $C_1$ group (P=.015); $C_C$ and $M_C$ group (P=.004) and $C_3$ and $M_3$ group presented statistically higher (P=.005) values. While adhesive failure was not seen in any of the groups, cohesive and combined patterns were seen in all groups. CONCLUSION. Based on the results of this in-vitro study, $Al_2O_{3-}$ sandblasting followed by liner application on conventionally sintered zirconia cores may be preferred to enhance bond strength.

• The Korean Journal of Community Living Science
• /
• v.18 no.2
• /
• pp.293-300
• /
• 2007

The antimicrobial activity of 10 different traditional medicinal herbs extracts against E. coli was determined using paper disc method. Caesalpinia sappan and Rhus javanica, extracts in 5 mg/ml, and Paeonia suffruticosa and Seutellaria baicalensis extracts in 10 mg/ml showed significant antimicrobial activity against E. coli. Minimum inhibitory concentrations of medicinal herbs extracts were in the range of $1.4{\sim}8mg/ml\;and\;1.2{\sim}12mg/ml$, for MeOH extracts and EtOH extracts, respectively. In addition, the antimicrobial activity of each solvent fraction was most significant with the EtOAc layer. Optical density at 620nm after 24 hours incubation of E. coli in the presence of 100, 300 or 500 ppm of Caesalpinia sappan extract ranged from 0.02 to 0.1 compared to 0.6 in the absence of Caesalpinia sappan extract, indicating that growth of E. coli was significantly inhibited within 24 hours by the addition of at least 300 ppm of Caesalpinia sappan extract. Optical density at 620 nm after 24 hours incubation of E. coli in the presence of 300 ppm of Rhus javanica extract ranged from 0.02 to 0.2 compared to 0.5 in the absence of Rhus javanica extract, indicating that growth of E. coli was also significantly inhibited within 24 hours by the addition of at least 500 ppm of Rhus javanica extract. In conclusion, these findings suggest that extracts from medicinal herbs may play important roles in antimicrobial activities against E. coli.

• Korean Journal of Plant Resources
• /
• v.19 no.4
• /
• pp.491-496
• /
• 2006

Antimicrobial activity of 18 different traditional medicinal herbs extracts against Staphylococcus aureus was determined by a paper disc method. The Prunella vulgaris, Caesalpinia sappan and Rhus javanica extracts in 5 mg/ml, Poncirus trifoliata, Lonicera japonica and Seutellaria baicalensis extracts in 10 mg/ml and Schizandra chinensis, Alpinia katsumadai, Siegesbeckia orientalis extracts in 30 mg/ml showed a significant antimicrobial activity against Staphylococcus aureus. Minimum inhibitory concentrations of medicinal herbs extracts were in the range of $1{\sim}34\;mg/ml$ and $1{\sim}46\;mg/ml$, in the case of MeOH extracts and EtOH extracts, respectively. In addition, the antimicrobial activity of each solvent fraction was most significant with EtOAc layer. Optical density at 620nm after 24 hours incubation of Staphylococcus aureus in the presence of 100, 300 or 500 ppm of Caesalpinia sappan extract ranged from 0.02 to 0.03 compared to 0.4 in the absence of Caesalpinia sappan extract, indicating that growth of Staphylococcus aureus was significantly inhibited within 24 hours by the addition of at least 100 ppm of Caesalpinia sappan extract. Optical density at 620 nm after 24 hours incubation of Staphylococcus aureus in the presence of 300 ppm of Rhus javanica extract ranged from 0.02 to 0.03 compared to 0.4 in the absence of Rhus javanica extract, indicating that growth of Staphylococcus aureus was also significantly inhibited within 24 hours by the addition of at least 300 ppm of Rhus javanica extract. Optical density at 620 nm after 24 hours incubation of Staphylococcus aureus in the presence of 300 ppm of Seutellaria baicalensis extract ranged from 0.02 to 0.07 compared to 0.4 in the absence of Seutellaria baicalensis extract, indicating that growth of Staphylococcus aureus was also significantly inhibited within 24 hours by the addition of at least 300 ppm of Seutellaria baicalensis extract. In conclusion, these findings suggest that extracts from medicinal herbs may play important roles for antimicrobial activities against Staphylococcus aureus.

• Journal of The Korean Ophthalmological Society
• /
• v.54 no.9
• /
• pp.1445-1451
• /
• 2013

Purpose: To report long-term changes in the average retinal nerve fiber layer (RNFL) thickness in 2 patients who had intravitreal bevacizumab (IVB) injection for diabetic papillopathy. Case summary: A 36-year-old patient with diabetes complained of decreased visual acuity (20/200) in the right eye. The fundus examination showed optic disc swelling in both eyes. The average RNFL thickness based on optical coherence tomography (OCT) increased to $278{\mu}m$ and Goldmann perimetry showed nasal visual field defect in the right eye. The IVB was injected into the right eye. Three weeks after the IVB injection, RNFL thickness decreased to $135{\mu}m$ and visual acuity improved to 20/25 in the right eye. However, RNFL thickness increased from 126 to $207{\mu}m$ and visual acuity decreased to 20/32 in the left eye. Thus, IVB was injected into the left eye. In week 3, RNFL thickness decreased to $147{\mu}m$ and visual acuity improved to 20/20 in the left eye. At 12 months after IVB injection, RNFL thickness was $87{\mu}m$ in the right eye and $109{\mu}m$ in the left eye. A 57-year-old patient with diabetes complained of decreased visual acuity (20/200) and showed optic disc swelling in the right eye. The average RNFL thickness increased to $252{\mu}m$ and Goldmann perimetry showed an enlarged blind spot in the right eye. IVB was injected into the right eye. After 3 weeks, RNFL thickness decreased to $136{\mu}m$ and visual acuity improved to 20/70 in the right eye. Six months after IVB injection, RNFL thickness was $83{\mu}m$ in the right eye. Conclusions: Visual acuity progressively improved within 3 weeks and RNFL thickness measured by spectral domain OCT showed progressive thickness reduction in 2 cases of diabetic papillopathy patients who had IVB injections.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.1
• /
• pp.7-13
• /
• 2011

This study was conducted to investigate the antimicrobial activity of Ginkgo biloba L. leaves, seed and outer seedcoat against bacteria. Antimicrobial effects of Ginkgo biloba L. leaves (GBL), seed (GBS) and outer seedcoat (GBO) were examined by paper disc method and optical density method to determine minimum inhibition concentration (MIC), and observed by scanning electron microscope (SEM) to figure out the morphological change on the surface when Ginkgo biloba leaves extract was treated. The extracts of GBL, GBS and GBO were extracted by solvents such as methanol, ethanol, water. The methanol extract of GBL and GBO showed the highest antimicrobial activity against Bacillus cereus, Bacillus subtilis, Klebsiella pneumoniae, Listeria monocytogenes, Salmonella Typhimurium, Staphylococcus aureus, Yersinia enterocolitica except Escherichia coli and thus was further fractionated. The MICs of the chloroform fraction of GBL methanol extract were $125{\mu}g$/mL against B. subtilis, and L. monocytogenes; GBO methanol extract were $62.5{\mu}g$/mL against B. cereus and $125{\mu}g$/mL against B. subtilis, and L. monocytogenes. The microorganisms were treated with chloroform extracts ($2000{\mu}g$/mL) of GBL and GBO methanol extracts. It was observed by scanning electron microscope (SEM). The cells were expanded and a part of cell wall was completely destructed by GBL and GBO. Thus Ginkgo biloba L. leaves and outer seedcoat could be further developed into a natural antimicrobial agent.

• Imaging Science in Dentistry
• /
• v.48 no.2
• /
• pp.97-101
• /
• 2018

Purpose: This study evaluated the radiopacity of contemporary luting cements using conventional and digital radiography. Materials and Methods: Disc specimens (N=24, n=6 per group, ø$7mm{\times}1mm$) were prepared using 4 resin-based luting cements (Duolink, Multilink N, Panavia F 2.0, and U-cem). The specimens were radiographed using films, a complementary metal oxide semiconductor (CMOS) sensor, and a photostimulable phosphor plate (PSP) with a 10-step aluminum step wedge (1 mm incremental steps) and a 1-mm-thick tooth cut. The settings were 70 kVp, 4 mA, and 30 cm, with an exposure time of 0.2 s for the films and 0.1 s for the CMOS sensor and PSP. The films were scanned using a scanner. The radiopacity of the luting cements and tooth was measured using a densitometer for the film and NIH ImageJ software for the images obtained from the CMOS sensor, PSP, and scanned films. The data were analyzed using the Kruskal-Wallis and Mann-Whitney U tests. Results: Multilink (3.44-4.33) showed the highest radiopacity, followed by U-cem (1.81-2.88), Panavia F 2.0 (1.51-2.69), and Duolink (1.48-2.59). The $R^2$ values of the optical density of the aluminum step wedge were 0.9923 for the films, 0.9989 for the PSP, 0.9986 for the scanned films, and 0.9266 for the CMOS sensor in the linear regression models. Conclusion: The radiopacities of the luting materials were greater than those of aluminum or dentin at the same thickness. PSP is recommended as a detector for radiopacity measurements because of its accuracy and convenience.

• Restorative Dentistry and Endodontics
• /
• v.35 no.5
• /
• pp.359-367
• /
• 2010

Objectives: The purpose of the present in vitro study was to evaluate the biocompatibility of mineral trioxide aggregate (MTA) mixed with glass ionomer cement (GIC), and to compare it with that of MTA, GIC, IRM and SuperEBA. Materials and Methods: Experimental groups were divided into 3 groups such as 1 : 1, 2 : 1, and 1 : 2 groups depending on the mixing ratios of MTA powder and GIC powder. Instead of distilled water, GIC liquid was mixed with the powder. This study was carried out using MG-63 cells derived from human osteosarcoma. They were incubated for 1 day on the surfaces of disc samples and examined by scanning electron microscopy. To evaluate the cytotoxicity of test materials quantitatively, XTT assay was used. The cells were exposed to the extracts and incubated. Cell viability was recorded by measuring the optical density of each test well in reference to controls. Results: The SEM revealed that elongated, dense, and almost confluent cells were observed in the cultures of MTA mixed with GIC, MTA and GIC. On the contrary, cells on the surface of IRM or SuperEBA were round in shape. In XTT assay, cell viability of MTA mixed with GIC group was similar to that of MTA or GIC at all time points. IRM and SuperEBA showed significantly lower cell viability than other groups at all time points (p < 0.05). Conclusions: In this research MTA mixed with GIC showed similar cellular responses as MTA and GIC. It suggests that MTA mixed with GIC has good biocompatibility like MTA and GIC.