• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.2
• /
• pp.367-418
• /
• 2018

Just as safety is the most important thing in aviation, safety is the most important in the operation of unmanned aircraft (RPA), and safety operation is the most important in the legal responsibility of the operator of the unmanned aircraft. In this thesis, the legal responsibility of the operator of the unmanned aircraft, focusing on the responsibility of the operator of the unmanned aircraft, was discussed in depth with the issue of insurance, which compensates for damages in the event of an accident First of all, the legal responsibility of the operator of the unmanned aircraft was reviewed for the most basic : definition, scope and qualification of the operator of the unmanned aircraft, and the liability of the operator of the Convention On International Civil Aviation, the ICAO Annex, the RPAS Manual, the Rome Convention, other major international treaties and Domestic law such as the Aviation Safety Act. The ICAO requires that unmanned aircraft be operated in such a manner as to minimize hazards to persons, property or other aircraft as a major principle of the operation of unmanned aircraft, which is ultimately equivalent to manned aircraft Considering that most accidents involving unmanned aircrafts fall to the ground, causing damage to third parties' lives or property, this thesis focused on the responsibility of operators under the international treaty, and the responsibility of third parties for air transport by Domestic Commercial Act, as well as the liability for compensation. In relation to the Rome Convention, the Rome Convention 1952 detailed the responsibilities of the operator. Although it has yet to come into effect regarding liability, some EU countries are following the limit of responsibility under the Rome Convention 2009. Korea has yet to sign any Rome Convention, but Commercial Act Part VI Carriage by Air is modeled on the Rome Convention 1978 in terms of compensation. This thesis also looked at security-related responsibilities and the responsibility for privacy infringement. which are most problematic due to the legal responsibilities of operating unmanned aircraft. Concerning insurance, this thesis looked at the trends of mandatory aviation insurance coverage around the world and the corresponding regulatory status of major countries to see the applicability of unmanned aircraft. It also looked at the current clauses of the Domestic Aviation Business Act that make insurance mandatory, and the ultra-light flight equipment insurance policy and problems. In sum, the operator of an unmanned aircraft will be legally responsible for operating the unmanned aircraft safely so that it does not pose a risk to people, property or other aircraft, and there will be adequate compensation in the event of an accident, and legal systems such as insurance systems should be prepared to do so.

• Korean Journal of Ecology and Environment
• /
• v.56 no.4
• /
• pp.348-362
• /
• 2023

This study analyzed the monitoring results of fishways at 16 weirs constructed on four large Rivers to provide data helpful for the operation and management of fishways. The average utilization rate of the fishways at the weirs was confirmed to be 64.9%. When comparing the dominant species in the mainstream and fishway monitoring results, differences were observed in 9 weirs (56.3%). This indicated that the species prevalent in the mainstream were not necessarily the ones most frequently using the fishways. The average number of individuals using the fishways per day was 336. When classifying the fish species using the fishway by life type, 92.3% were primary freshwater fish, and migratory species accounted for only 5.6%. Analysis based on the season of fishway usage revealed that an average or higher number of fish species used the fishways from May to October, with the highest number of individual users occurring from June to August. Between May and July, 80% of the fish species using the fishways were in their spawning period, while during other season, less than 40% were species that move during the spawning period. The fishways that showed a significant alignment between the spawning period and the fishway passage period were Rhinogobius brunneus, Leiocassis nitidus, Squalidus chankaensis tsuchigae, Pseudogobio esocinus, Acheilognathus rhombeus, and Pungtungia herzi, in that order. When comparing the fishway monitoring results of the Gangjeong-Goryeong Weir and the Dalseong Weir with the upper part water level of the weir, both the number of fish species and individuals using the fishway showed positive correlations with the upper part water level of the weir. This suggests that a higher water level of the weir increases the inflow discharge within the fishway, leading to increased use by fish (number of individuals in Gangjeong-Goryeong Weir, P<0.001; number of species in Dalseong Weir, P<0.05). This study summarized and analyzed the results of fishway monitoring at 16 weirs built on four large Rivers, considering fishway efficiency, operation and management, monitoring period, and regulation of water level in the upper part of the weir. It is thought that this will help understand the status of fish use in fishways on large River and aid the construction, operation, and management of fishways in the future.

• Journal of Biosystems Engineering
• /
• v.33 no.6
• /
• pp.453-461
• /
• 2008

This study was conducted to develop a root-removed splice grafting system for cucurbitaceous vegetables, mainly watermelon and cucumber seedlings, for the seedlings factories where currently most of seedlings grafting works are carried out by manual works. The major results of the study are as follows. The dimensions of rootstocks and scions, except cotyledon width, of root- removed splice grafting of watermelon and cucumber were shown to be varied within the 2.5-fold range. The growth status of seedlings were not consistent in terms of cotyledon sprouting direction and angle which were considered as one of the important factors for in root-removed splice grafting. The grafting work of root-removed splice for grafted watermelon and cucumber could be divided by four sub-operations: seedling supplying, cutting, clipping and potting, while a part or all root of the rootstock was removed in the seedlings supplying operation. The cutting angles of the rootstock and scion were $34-45^{\circ}$ and $20-45^{\circ}$, respectively, while the stem length of the scion varied from 6 mm to 12 mm. The splices of rootstock and scion were heaped up in parallel and then fixed by a clip. It indicated that the ideal grafting system, adopting conventional grafting processes of seedlings specifications as well as conventionally manual root-removed splice grafting method, performed very well for seedlings gripping and transporting, supplying clip, clipping and discharging grafted seedlings while workers supplied seedlings to the semi-automatical system.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.6
• /
• pp.743-752
• /
• 2009

One of the major problems associated with operation of domestic sewer lines involves hydraulic problems such as insufficient conveyance capacity, exceeding maximum velocity, and deficiency of minimum velocity. It has also been pointed out that influent concentration lower than design concentration of pollutants, which is mainly caused by unidentified inflow and infiltration, degrades the operational efficiency of many sewage treatment plants (STPs). A computer-added analysis method supporting a coupled simulation of sewage quality and quantity is essentially required to evaluate the status of existing STPs and to improve their efficiency by a proper sewer rehabilitation work. In this study, dynamic water quality simulations were conducted using MOUSE TRAP to investigate the principal parameters that governs the changes of BOD, ${NH_4}^+$, and ${PO_4}^{3-}$3- concentrations within the sewer networks based on data acquired through on-site and laboratory measurements. The BOD, ${NH_4}^+$ and ${PO_4}^{3-}$3- concentrations estimated by MOUSE TRAP was lower than theoretical pollution loads because of sedimentation and decomposition in the sewer. The results revealed that sedimentation is a most important factor than other biological reactions in decreasing pollutant load in the sewers of C-city. The sensitivity analysis of parameters pertaining to water quality changes indicated that the effect of the BOD decay rate, the initial DO concentration, the half-saturation coefficient of dissolved BOD, and the initial sediment depth is marginal. However, the influence of settling rate and temperature is relatively high because sedimentation and precipitation, rather than biological degradation, are dominant processes that affect water quality in the study sewer systems.

• Journal of Korean Neurosurgical Society
• /
• v.46 no.1
• /
• pp.23-30
• /
• 2009

Objective : Clinical features of pituitary hemorrhage vary from asymptomatic to catastrophic. The purpose of this study was to evaluate the factors related to severity of hemorrhage of pituitary adenoma. Methods : Pituitary hemorrhage was noted in 32 of 88 patients who underwent operations between January 2000 and December 2007. Clinical status was classified into group I (no hemorrhage symptoms), II (mild to moderate symptoms without neurological deficit), and III (with neurological deficit), and was compared to radiological, pathological, and operative findings. All patients were operated by transsphenoidal approach, and hemorrhage-related symptoms were relieved. Results : Groups I, II,and III comprised 15, 10 and 7 patients, respectively. In group I, hemorrhage volume was under 1 mL in 11 (73.3%), but, it was above 1 mL in 7 (70%) of group II and in all cases of group III. Hemorrhage stage based on MRI findings was chronic or subacute in 11 (73.3%) of group I, acute in 6 (60%) of group II, and acute or hyperacute in 6 (85.7%) of group III. Pathological examination revealed chronic-stage hematomas in 5 (50%) group II patients. Functioning adenomas were found in 5 (33.3%) group I patients but none in group II or III patients. Silent adenomas were found in 4 (26.7%), 8 (80%), and 3 (42.9%) in groups I, II,and III, respectively. Conclusion : Clinical features of pituitary hemorrhage may differ with the radiological and immunohistopathlogical findings. Persistent symptoms are related to the chronic stage of hematoma requiring surgery for symptom relief. Neurological deficits are caused by large amount of acute hemorrhage requiring emergency operation. Silent adenoma is related to the severity of pituitary hemorrhage.

• Korea Journal of Hospital Management
• /
• v.17 no.2
• /
• pp.21-33
• /
• 2012

Purpose : This study aims to suggest application of patients DB to hospital marketing by performing market segmentation and selecting target market. Consequently help to establish suited strategy of marketing. Method : 14,072 patients hospitalized in a University Medical Center were recruited into this study. In order to classify the customer groups, cluster analysis was used with RFM(Recency, Frequency, Monetary) model, and 1-way ANOVA verified the differences among groups. And then, sociodemographical status, healthcare utilization and diagnosis(ICD-10) of each group were compared to draw a marketing strategy. Results : Four groups were classified through clustering analysis, and'high use and high profit' and'low use and high profit' groups were selected as a target market. The features of target market were as follows, the female proportion was high; used a private room; hospitalized through the emergency room; had operation; length of stay was long; had many comorbidity and cooperative treatment. There was difference in each feature of target market: as for the'high use and high profit' group, many patients were diagnosed with 'certain infectious and parasitic diseases'; and as for the'low use and high profit'group, the proportion of patients who purchased'industrial accident compensation insurance'and'auto insurance'was relatively high; many patients were diagnosed with'Injury, poisoning and certain other consequences of external causes'. Conclusion : It is needed to establish'positioning' strategy by monitoring and communicating with'high use and high profit' group. And for the case of'low use and high profit' group, it is necessary to make a follow-up management and lead them to have a medical check-up.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1966-1972
• /
• 2011

Optical flow estimation based on multi constraint approaches is frequently used for recognition of moving objects. This paper proposed the method to monitor passenger boarding using image processing when a train is operated based on Automatic Train Operation(ATO). The movement of passenger can be detected to compare two images, one is a basic image and another is immediately captured by CCTV. Optical Flow helps to find the movement of passenger when two images are compared. The movement of passenger is one of important informations for ATO system because it needs to decide door status.

• Proceedings of the Safety Management and Science Conference
• /
• 2010.11a
• /
• pp.63-80
• /
• 2010

This paper describes the development of various lighting equipment adapting Ultra Constant Discharge Lamp that has newly been on commercial supply in the market. Meeting the required conditions of lighting equipment, various types of UCD Lamp equipment with excellent performances could be successfully developed. In order to provide a guideline for the economical lighting product selection, the analyzed data comparison between Hi-pressure Sodium Lamp which has been the most popular lamp for street lighting and UCD Lamp is provided. The conclusions of the study are made as follows; (1) The performance measurement result of UCD Lamp shows excellent Luminous Efficacy as 108Lm/W, daylight-like Color Rendering Index as 90Ra, and the best operating temperature range as $-50^{\circ}C{\sim}+85^{\circ}C$. Comparing to the Hi-pressure Sodium Lamp, UCD could be evaluated as much superior products. (2) In an assembled status with the lighting fixture (Type STB형-60W), UCD Lamp was tested OK for one hour duration at the temperature range form $-50^{\circ}C$ to $+85^{\circ}C$ and the humidity of 98%. The operation at the extremely low temperature can be an excellent feature to enable the export to the cold temperature regions such as Northern Europe and Russia and the specific applications for defense systems and special industry. (3) As UCD Lamp is a genuine Korea made product following Energy-saving and Eco-friendly policy, it should be appreciated as one of the best $CO^2$ reduction Green product.

• Aerospace Engineering and Technology
• /
• v.13 no.1
• /
• pp.27-36
• /
• 2014

Generally, satellites continuously monitor that its major functions are working properly and their hardware are in a good status using several SOH data. In case a fault that is not recognized as a temporal problem or a failure that can be considered to propagate its damage to the other parts are detected, fault management logic is performed automatically without any contact of ground station. In this paper, attitude error detection using sun sensors on a rotating solar array is proposed. Attitude error can be detected by comparing the offset angle between the actual data computed from the sun sensor and the data predicted from the orbit and ephemeris information for the two types of solar array operation method. During the eclipse, the output of attitude error detection method becomes zero because the sun sensor output cannot be provided. Finally, the proposed method is analyzed through the data processing using on-orbit data.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.2
• /
• pp.38-43
• /
• 2015

Tungsten inert gas (TIG) welding is commonly used in industries that require airtightness, watertightness, oiltightness, and precision. It is a non-consumable welding method that is commonly used for the welding of non-ferrous metals, but it can be used to weld most metals. The methods of TIG welding can be divided into three types. The first, manual welding is done directly on the metal by a welder with a torch. The second, semi-automatic welding, gets help from a material supplying machine, but it is conducted by a welder. Lastly, automated welding is conducted fully by a machine during its process and operation. Depending on the selection of electrode, the amount of heat that is applied to the base material and the electrode rod changes and makes the shape of welded parts different. A direct-current positive electrode was used for this study. Through the change of shielding gas type on a structural steel (SS-400) that is commonly used in industry, the composition and shape changes in welded parts were detected after welding. The heat-affected area, hardness value, and tensile strength were also identified through hardness testing and tensile testing. In this study, it was found that the higher hardness value of the heat-affected is, the weaker the tensile strength becomes.