• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.4
• /
• pp.54-66
• /
• 2024

Various new ITS Services to support autonomous vehicles. Infra-guidance service is also one of the new ITS services that have emerged to harmonize the traffic flow in mixed traffic by assisting autonomous vehicles. As a verification procedure to introduce a new ITS service, use cases and scenarios will be established for various spatial and situational ranges that may occur on the road, and limited test operations and living lab pilot operations will be performed. On the other hand, numerous cases occur depending on environmental factors such as the traffic volume at the time of service operation, weather and road geometric characteristics. This study presents a test scenario design method for verifying new ITS services, focusing on the infra-guidance service that is being researched as an emerging autonomous driving-supported technology.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.5
• /
• pp.143-151
• /
• 2024

This study proposes a guide to activate regional resource-based start-up projects by analyzing program planning, consultation, promotion, recruitment, operation, support, and performance measurement. It provides insights into effective methods for engaging prospective entrepreneurs interested in local brands.The study categorized 100 local start-up communities on platforms like YouTube and Instagram, identified suitable message characteristics for each channel, and measured conversion rates after distributing seven types of messages. Over four weeks, the messages received over 57,000 views, achieved a 13% conversion rate, and attracted about 100 applicants. This evaluation identified the most effective message types, offering key policy implications and insights into early-stage entrepreneurs' awareness and the entrepreneurial ecosystem. The researchers also revealed that cooperation with local communities and regional innovation centers is an important success of a local startup.

• Nanomaterials
• /
• v.12 no.7
• /
• pp.1061-1074
• /
• 2022

In this work, a self-powered, solar-blind photodetector, based on InZnSnO (IZTO) as a Schottky contact, was deposited on the top of Si-doped β-Ga₂O₃ by the sputtering of two-faced targets with InSnO (ITO) as an ohmic contact. A detailed numerical simulation was performed by using the measured J-V characteristics of IZTO/β-Ga₂O₃ Schottky barrier diodes (SBDs) in the dark. Good agreement between the simulation and the measurement was achieved by studying the effect of the IZTO workfunction, β-Ga₂O₃ interfacial layer (IL) electron affinity, and the concentrations of interfacial traps. The IZTO/β-Ga₂O₃ (SBDs) was tested at a wavelength of 255 nm with the photo power density of 1 mW/cm². A high photo-to-dark current ratio of 3.70×10⁵ and a photoresponsivity of 0.64 mA/W were obtained at 0 V as self-powered operation. Finally, with increasing power density the photocurrent increased, and a 17.80 mA/W responsivity under 10 mW/cm² was obtained.

• Journal of Sinology and China Studies
• /
• v.76
• /
• pp.135-162
• /
• 2018

Dufu has left about 67 poems on thing in his lifetime, and not only has a large number of his works, but also achieved remarkable accomplishments in both thought and artistic skill. In this paper, I focused on the contents and characteristics contained in the Dufu's poem on thing made by staying in the Chengdu. The purpose of this analysis was to think that after the Qinzhou(秦州) period, the style of the duo changed, and that it was possible to see how this was reflected in the Chengdu(成都) period, and that it would later serve as a bridge to the creation of the Kuizhou(夔州) period it is. I also want to examine how the spirit of the patriotism of Dufu, which was directly revealed in the previous period, was expressed implicitly through the method of metaphor in this period. The change of material did not bring about a fundamental change in his feelings like reality awareness, rather, it can be said that the depth has been added by revealing his thoughts figuratively through these things. Another characteristic of poem on thing at this time is that it is made of materials such as cuckoo, stalagmite, and stone rhinoceros. Through his works based on these materials, he reveals the unreasonableness and disadvantages of the real society with a strong touch, showing the capacity of a poet who is excellent in the operation of metaphor.

• Nuclear Engineering and Technology
• /
• v.56 no.10
• /
• pp.4412-4422
• /
• 2024

The CFETR multipurpose overload robot (CMOR) is a critical component of the fusion reactor remote handling system. To accurately calculate and visualize the structural deformation and stress characteristics of the CMOR motion process, this paper first establishes a CMOR kinematic model to analyze the unfolding and working process in the vacuum chamber. Then, the dynamic model of CMOR is established using the Lagrangian method, and the rigid-flexible coupling modeling of CMOR links and joints is achieved using the finite element method and the linear spring damping equivalent model. The co-simulation results of the CMOR rigid-flexible coupled model show that when the end load is 2000 kg, the extreme value of the end-effector position error is more than 0.12 m, and the maximum stress value is 1.85 × 10⁸ Pa. To utilize the stress-strain data of CMOR, this paper designs a CMOR morphology prediction control system based on Unity software. Implanting CMOR finite element analysis data into the Unity environment, researchers can monitor the stress strain generated by different motion trajectories of the CMOR robotic arm in the control system. It provides a platform for subsequent research on CMOR error compensation and extreme operation warnings.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.99-107
• /
• 2017

This paper proposes a battery model coefficient correction method for improving the accuracy of existing lithium battery equivalent models. BMS(battery management system) has been researched and developed to minimize shortening of battery life by keeping SOC(state of charge) and state of charge of lithium battery used in various industrial fields such as EV. However, the cell balancing operation based on the battery cell voltage can not follow the SOC change due to the internal resistance and the capacitor. Various battery equivalent models have been studied for estimation of battery SOC according to the internal resistance of the battery and capacitors. However, it is difficult to apply the same to all the batteries, and it tis difficult to estimate the battery state in the transient state. The existing battery electrical equivalent model study simulates charging and discharging dynamic characteristics of one kind of battery with error rate of 5~10% and it is not suitable to apply to actual battery having different electric characteristics. Therefore, this paper proposes a battery model coefficient correction algorithm that is suitable for real battery operating environments with different models and capacities, and can simulate dynamic characteristics with an error rate of less than 5%. To verify proposed battery model coefficient calibration method, a lithium battery of 3.7V rated voltage, 280 mAh, 1600 mAh capacity used, and a two stage RC tank model was used as an electrical equivalent model of a lithium battery. The battery charge/discharge test and model verification were performed using four C-rate of 0.25C, 0.5C, 0.75C, and 1C. The proposed battery model coefficient correction algorithm was applied to two battery models, The error rate of the discharge characteristics and the transient state characteristics is 2.13% at the maximum.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.451-464
• /
• 2008

Three-phase inverse fluidized bed has been widely adopted with its increasing demand in the fields of bioreactor, fermentation process, wastewater treatment process, absorption and adsorption processes, where the fluidized or suspended particles are small or lower density comparing with that of continuous liquid phase, since the particles are frequently substrate, contacting medium or catalyst carrier. However, there has been little attention on the three-phase inverse fluidized beds even on the hydrodynamics. Needless to say, the information on the hydrodynamics and transport phenomena such as heat and mass transfer in the inverse fluidized beds has been essential for the operation, design and scale-up of various reactors and processes which are employing the three-phase inverse beds. In the present article, thus, the information on the three-phase inverse fluidized beds has been summarized and reorganized to suggest a pre-requisite knowledge for the field work in a sense of engineering point of view. The article is composed of three parts; hydrodynamics, heat and mass transfer characteristics of three-phase inverse fluidized beds. Effects of operating variables on the phase holdup, bubble properties and particle fluctuating frequency and dispersion were discussed in the section of hydrodynamics; effects of operating variables on the heat transfer coefficient and on the heat transfer model were discussed in the section of heat transfer characteristics ; and in the section of mass transfer characteristics, effects of operating variables on the liquid axial dispersion and volumetric liquid phase mass transfer coefficient were examined. In each section, correlations to predict the hydrodynamic characteristics such as minimum fluidization velocity, phase holdup, bubble properties and particle fluctuating frequency and dispersion and heat and mass transfer coefficients were suggested. And finally suggestions have been made for the future study for the application of three-phase inverse fluidized bed in several available fields to meet the increasing demands of this system.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.281-304
• /
• 2022

Heungdeokjeon was the first pavilion built on the site of Sueocheong during the expansion of Gyeongungung. In this study, we tried to clarify the specific construction process of Heungdeokjeon, which was used for various purposes such as the copy location for Portraits of ancestors, temporary enshrinement site, and the funeral building for the rest of the body, which is Binjeon. In addition, we tried to confirm the historical value based on the characteristics derived by the history of the building and the rituals performed. Heungdeokjeon began to be built in the second half of 1899, and is estimated to have been completed between mid-February and mid-March 1900. It was a ritual facility equipped with waiting rooms for the emperor and royal ladies as an annex. The relocation work was planned in April 1901 and began in earnest after June, and it was closely linked to the construction of attached buildings of Seonwonjeon. In addition, comparing the records on the construction and relocation cost of Heungdeokjeon with those related to the reconstruction of Seonwonjeon, it was confirmed that annex buildings of Heungdeokjeon were relocated and used as annex buildings of Seonwonjeon. The characteristics identified in the process of Heungdeokjeon used as a place to copy portraits are as follows. First, it was used as a place to copy portraits twice in a short period of time. Second, it was the place where the first unprecedented works were carried out in relation to the copying of portraits. Third, the pavilion, which was specially built for imperial rituals, was used as a place to copy portraits. Since then, it has been used as a funeral building for the rest of the body, and features different from those of the previous period are identified. It was the building dedicated to rituals for use as Binjeon, and was also a multipurpose building for copying portraits. In other words, Heungdeokjeon, along with Gyeongbokgung Taewonjeon, is the building that shows the changes in the operation of Binjeon in the late Joseon Dynasty. Characteristics are also confirmed in portrait-related rituals performed at Heungdeokjeon. The first is that Jakheonlye was practiced frequently in a short period of time. The second is that the ancestral rites of Sokjeolje and Bunhyang in Sakmangil, which are mainly held in the provincial Jinjeon, were identified. This is a very rare case in Jinjeon of the palace. The last is that Jeonbae, jeonal, and Bongsim were implemented mutiple times. In conclusion, Heungdeokjeon can be said to be a very symbolic building that shows the intention of Gojong, who valued imperial rituals, and the characteristics of the reconstruction process of Gyeongungung.

• The Korean Journal of Emergency Medical Services
• /
• v.15 no.3
• /
• pp.31-44
• /
• 2011

Purpose : The purpose of emergency medical services(EMS) is to save human lives and assure the completeness of the body in emergency situations. Those who have been qualified on medical practice to perform such treatment as there is the risk of human life and possibility of major physical and mental injuries that could result from the urgency of time and invasiveness inflicted upon the body. In the emergency medical activities, 119 emergency medical technicians mainly perform the task but they are not able to perform such task independently and they are mandatory to receive medical direction. The purpose of this study is to examine the recognition and request for medical direction by 119 emergency medical technicians in order to provide basic information on the development of medical direction program suitable to the characteristics of EMS as well as for the studies on EMS for the sake of efficient operation of pre-hospital EMS. Method : Questionnaire via e-mail was conducted during July 1-31, 2010 for 675 participants who are emergency medical technicians, nurses and other emergency crews in Gyeongbuk. The effective 171 responses were used for the final analysis. In regards to the emergency medical technicians' scope of responsibilities defined in Attached Form 14, Enforcement regulations of EMS, t-test analysis was conducted by using the means and standard deviation of the level of request for medical direction on the scope of responsibilities of Level 1 & Level 2 emergency medical technicians as the scale of medical direction request. The general characteristics, experience result, the reason for necessity, emergency medical technicians & medical director request level, medical direction method, the place of work of the medical director, feedback content and improvement plan request level were analyzed through frequency and percentage. The level of experience in medical direction and necessity were analyzed through ${\chi}^2$ test. Results : In regards to the medical direction experience per qualification, the experience was the highest with 53.3% for Level 1 emergency medical technicians and 80.3% responded that experience was helpful. As for the recognition on the necessity of medical direction, 71.3% responded as "necessary" and it turned out to be the highest of 76.9% in nurses. As for the reason for responding "necessary", the reason for reducing the risk and side-effects from EMS for patients was the largest(75.4%), and the reason of EMS delay due to the request of medical direction was the highest(71.4%) for the reason for responding "not necessary". In regards to the request level of the task scope of emergency medical technicians, injection of certain amount of solution during a state of shock was the highest($3.10{\pm}.96$) for Level 1 emergency rescuers, and the endotracheal intubation was the highest($3.12{\pm}1.03$) for nurses, and the sublingual administration of nitroglycerine(NTG) during chest pain was the highest($2.62{\pm}1.02$) for Level 2 emergency medical technicians, and regulation of heartbeat using AED was the highest($2.76{\pm}.99$) for other emergency crews. For the revitalization of medical direction, the improvement in the capability of EMS(78.9%) was requested from emergency crew, and the ability to evaluate the medical state of patient was the highest(80.1%) in the level of request for medical director. The prehospital and direct medical direction was the highest(60.8%) for medical direction method, and the emergency medical facility was the highest(52.0%) for the placement of medical director, and the evaluation of appropriateness of EMS was the highest(66.1%) for the feedback content, and the reinforcement of emergency crew(emergency medical technicians) personnel was the highest(69.0%) for the improvement plan. Conclusion : The medical direction is an important policy in the prehospital EMS activity because 119 emergency medical technicians agreed the necessity of medical direction and over 80% of those who experienced medical direction said it was helpful. In addition, the simulation training program using algorithm and case study through feedback are necessary in order to enhance the technical capability of ambulance teams on the item of professional EMS with high level of request in the task scope of emergency medical technicians, and recognition of medical direction is the essence of the EMS field. In regards to revitalizing medical direction, the improvement of the task performance capability of 119 emergency medical technicians and medical directors, reinforcement of emergency medical activity personnel, assurance of trust between emergency medical technicians and the emergency physician, and search for professional operation plan of medical direction center are needed to expand the direct medical direction method for possible treatment beforehand through the participation by medical director even at the step in which emergency situation report is received.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.8 no.1
• /
• pp.33-38
• /
• 2009

Purpose: We wanted to report the clinical characteristics and arthroscopic findings of radial tear in medial meniscus posterior horn insertion, commonly occurs in patient over middle age with documentary review. Materials and Methods: Retrograde study using hospital records was done to 40 cases in 40 patients who visited our hospital and had been performed knee arthroscopic surgery due to medial meniscus posterior horn insertion tear between January, 2005 to April, 2007. Seven cases were male and 33 cases were female with the mean age of 61 (range, 47-80). Trauma history, stage of arthritis, period between pain and operation, MRI findings, clinical symptoms and operation methods were evaluated. Results : Six cases had trauma history while 34 cases didn't. In simple x-ray, using Kellgren-Lawrence classification, 31 cases were between stage 0 and II while 9 cases were stage III. In arthroscopic exam, there were 17 cases of Outerbridge grade IV, 4 cases of grade III, 9 cases of grade II, 9 cases of grade I. The mean duration of pain was 5.3 months. In MRI, at least one finding of cleft in axial or coronal view or ghost sign in sagittal view was found in all cases. The shape of meniscus tears were blunt in 18 cases, transverse in 12 and degenerative tear in 10. Subtotal meniscectomy was performed in 16 cases, partial meniscectomy in 10 cases and meniscal repair in 14 cases. Conclusion : Medial meniscus posterior horn insertion tear occurs in patients over middle age is rarely related to trauma history but causes painful mechanical symptom and usually accompany arthritis. Meniscectomy can be done for the treatment but repair can be considered is some cases. Further study on the treatment result will be needed.