• Progress in Medical Physics
• /
• v.13 no.3
• /
• pp.163-168
• /
• 2002

As for planning the radiation therapy for the tumor in the lung, inferring the motion of the organ or target due to the respiration from the motion of the skin was performed as the feasibility study with the animal. The dog weighed 20 kg was chosen for the experiment. The system, which can use the fluoroscopy and the CCD camera synchronously, was designed. With a radio-opaque marker on the skin of the dog, which indicates the lower lobe of the lung, the images of the motions for the lung were recorded in the A/P (anterior-to-posterior) and lateral view. At the same time, the images of the skin motions from CCD camera were also recorded. Skin moves periodically with the amplitude of 6 mm and the target in the lung made almost the same frequencies during its motion's amplitude of 15 mm and its direction change with the respiration. Therefore analyzed results showed strong correlation between the skin motion and the organ motion on the average of 0.85. This study indicated that the prediction of a target position in the lung, which is moving organ, is possible. For the animal study, predicting the exact target motion from the skin motion was possible and it can have the feasibility to apply to the patient clinically.

• Korean Journal of Ichthyology
• /
• v.25 no.1
• /
• pp.9-16
• /
• 2013

Egg development and early life history of the endangered species, Gobiobotia naktongensis were investigated to provide basic information regarding biological characteristics and restoration. Eggs were obtained from the females with Ovaprim (0.5 mL/kg) injecting and then fertilized using the dry method in the laboratory. Number of spawned eggs were $1,015{\pm}199$. Spawned eggs were strongly adhesive, opaque and grayish and measured $0.74{\pm}0.08mm$ (mean${\pm}$SD) in diameter. Fertilized egg size continuously increase until $2.94{\pm}0.10mm$ for 9 h 30 min at $23^{\circ}C$. Fertilized eggs hatched 26 h after fertilization, and newly hatched larvae an average were $3.4{\pm}0.07mm$(TL). The yolk sacs of the larvae were of most absorbed of 3 days after hatching and $4.4{\pm}0.1mm$ (TL). About at 13 days after hatching, they became to juvenile stage and reached $16.8{\pm}0.50mm$ (TL). At 80 days after hatching, the band patterns and external form of juveniles were similar to those of adults, and they averaged $27.7{\pm}2.32mm$(TL).

• The Journal of the Petrological Society of Korea
• /
• v.16 no.2 s.48
• /
• pp.59-72
• /
• 2007

Kilauea volcano located in the southern part of Hawaii island chains has been formed by continuous and sporadic eruption activities from 16 century to September of 1982. Kilauea volcano was investigated from collecting the samples of basalt to identify the geochemical characteristics of the lavas. Olivine, clinopyroxene, plagioclase, and opaque minerals with glass groundmass are observed. Clinopyroxene formed glomerophopyritic texture with plagioclase and zoning texture was observed in some of plagioclase phenocrysts. Major elements such as $K_2O$, $P_2O_5$, $TiO_2$ increased with respect to MgO. $Al_2O_3$ and CaO show the kink on Marker diagram due to the crystal fractionation of plagioclase and clinopyroxene with plagioclase respectively. Olivine has a wide range of Fo% ranging from 60 to 90, and MnO and FeO in the olivine are decreased with increasing Fo% oppositely increased $SiO_2$, MgO, and NiO. Ni in the whole rock is controlled not only by the mode of olivine but also by the Ni abondance in the olivine.

• Elastomers and Composites
• /
• v.47 no.4
• /
• pp.336-340
• /
• 2012

Residual stress in the injection molded part is originated from thermal shrinkage and shear stress during injection molding process. There are many measurement methods of residual stress in the plastic part. Residual stress in opaque products can be measured by chemical cracking test. This method enables the solvent and specimen to react and to cause cracks. Cracks developed according to the level of residual stress. Thus the stresses in plastic part can be quantitatively measured by counting the number of cracks or measuring the size of cracks. Relationship between stress and number of cracks in a plastic specimen has been investigated in this study. Bergen jig was used to give a strain in the specimens those were molded using PC/PBT and PC/ABS. Solvent for the chemical cracking test was prepared using tetrahydrofuran and methyl alcol with the ratio of 1 to 3. Stresses in the specimen can be calculated by strains those were imposed by Bergen jig. Cracks were developed for stress higher than certain level. The number of cracks increased by second order function for stress.

• Restorative Dentistry and Endodontics
• /
• v.36 no.4
• /
• pp.313-323
• /
• 2011

Objectives: This study investigated the optimal combination of 3-component photoinitiation system, consisting of CQ, p-octyloxy-phenyl-phenyl iodonium hexafluoroantimonate (OPPI), and 2-dimethylaminoethyl methacrylate (DMAEMA) to increase the degree of conversion of resin monomers, and analyze the effect of the ratio of the photoinitiator to the co-initiator. Materials and Methods: Each photoinitiators (CQ and OPP) and co-initiator (DMAEMA) were mixed in three levels with 0.2 wt.% (low concentration, L), 1.0 wt.% (medium concentration, M), and 2.0 wt.% (high concentration, H). A total of nine groups using the Taguchi method were tested according to the following proportion of components in the photoinitiator system: LLL, LMM, LHH, MLM, MMH, MHL, HLH, HML, HHM. Each monomer was polymerized using a quartz-tungsten-halogen curing unit (Demetron 400, USA) for 5, 20, 40, 60, 300 sec and the degree of conversion (DC) was determined at each exposure time using FTIR. Results: Significant differences were found for DC values in groups. MMH group and HHM group exhibited greater initial DC than the others. No significant difference was found with the ratio of the photoinitiators (CQ, OPPI) to the co-initiator (DMAEMA). The concentrations of CQ didn't affect the DC values, but those of OPPI did strongly. Conclusions: MMH and HHM groups seem to be best ones to get increased DC. MMH group is indicated for bright, translucent color and HHM group is good for dark, opaque colored-resin.

• Journal of radiological science and technology
• /
• v.28 no.1
• /
• pp.13-17
• /
• 2005

In domestic nondestructive testing(NDT) field, there have recently been radiation exposure accidents due to a disregard for confirmation of the position of radioisotope during the test. In order to prevent these kinds of accidents, a scintillating film has been developed. The scintillating film that can convert gamma-ray to visible light has a function of the position detection of radioisotope in a opaque guide tube of an NDT apparatus. The aim of this study is to enhance the visibility performance of the scintillating film and find out the best configuration of the scintillating film. In order to find appropriate materials for the scintillating film, various inorganic scintillating materials were evaluated in this work. An absolute luminance of the scintillating films was measured by luminance meter for evaluation of visibility performance. Ir-192 gamma projector was used for NDT apparatus. The experiment shows that the scintillating film with reflective layer was the more effective performance for visibility. The higher mixing ratio of scintillating material to binding material, the higher luminance was measured. $Gd_2O_2S(Tb)$ inorganic powder as the scintillating materials had the best performance for visibility of the scintillating film. The developed scintillating film helps to ensure safer environment to the operators.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.4
• /
• pp.179-186
• /
• 2017

This study investigated the mineralogical characteristics of lime mortars used in pointing of Namhansanseon Yeojang from Joseon dynasty. Polarization microscopy revealed quartz, feldspar, mica, pyroxene and opaque minerals in the lime mortars. XRD analysis also confirmed clay minerals chlorite and kaolin. As a result of particle size analysis of lime mortars, the particle size distribution was wide and size was not uniform. 60% of samples were corresponded to the sand area. The chemical components detected from XRF analysis, 8.71-11.18 % of Ca as the main component of lime and $SiO_2$, $Al_2O_3$, and $Fe_2O_3$ in soil minerals were main components. The lime mortars showed an endothermic peak due to decarbonization reaction of $CaCO_3$ at $750^{\circ}C$ and weight reduction rate of 10%. The microstructures were agglomerated amorphous and observed rhombohedral calcite crystals by scanning electron microscope. It is considered that the pointing of Yeojang is a mortar mixed with lime and soil. In addition the Hanbongseong Yeojang was constructed using the same materials and construction technique because the minerals composition is not different according to the Yeojang location and use.

• The Journal of Internal Korean Medicine
• /
• v.30 no.1
• /
• pp.144-152
• /
• 2009

Background : Ephedra (Ephedra sinica) has been widely used to treat respiratory disease in traditional medicine of East Asia for over a hundred years. Despite safety concerns raised by some, the use of ephedra in traditional medicine is documented over more than 1,800 years. It is well established that ephedra is one of the central medicines in Korean 'Seseng constitution' medicine. In Sasang constitution medicine, all humans can be divided into one of four types: Soeumin, Soyangin, Taeumin or Taeyangin, and each constitution type has their own typical characteristics. Accordingly, it is hypothesized that the adverse effects of ephedra differ depending on the Sasang constitution classification. Objectives : The aim of this study was to determine adverse effects of ephedra which is classified as a Taeumin herb, and to observe whether the response differs or not. according to Sasang constitution classification. Methods : The study design was a double-blind randomized controlled trial. The subjects were healthy adults 20 - 50 years old who agreed to participate in this study. They were allocated through randomization to either ephedra group (N=55) or placebo group (N=24). where ephedra extract (6 g of dried ephedra) and placebo with similar opaque capsules were given twice for one day. To compare the adverse events of ephedra according to Sasang constitution classification, we analyzed blood pressure (systolic and diastolic), pulse rate, the morning questionnaire, and patient's global assessment scale score for well known adverse events: palpitation, headache, sweating, tiredness, dyspepsia, and dry mouth. Results : After ingestion of ephedra, the pulse rate had a significant increase in all constitution types. The changes of diastolic pressure in Soeumin and the changes of pulse rate in Soeumin, Soyangin and Taeumin had a significant increase in the ephedra over the control group. In the ephedra group, the palpitation and dyspepsia score of the patients' global assessment scale had a significant increase in Soeumin, with palpitation and sweating score increasing in Soyangin. Others observations were insignificant results. Conclusion : The results of this study may confirm that the physical responses or adverse effects of herbs differ for each type of Sasang constitution. Future studies using other herbs will be required to ascertain the herbal drug reaction of Sasang constitutions.

• Korean Journal of Food Science and Technology
• /
• v.30 no.4
• /
• pp.823-826
• /
• 1998

It has been reported that alginic acid hydrolysate retains antimicrobial activity but the enzyme which hydrolyze alginic acid is not developed for industrial use. The authors developed chemical method for hydrolyzing alginic acid. For preparing alginic acid hydrolysate, equal quantity of alginic acid and ascorbic acid were added to water. Then the solution was heated at $121^{\circ}C$ for $20{\sim}30{\;}minutes$. The 4% solution of alginic acid hydrolysate was revealed relative viscosity 1.05, pH 3.2 and opaque whitish-yellow color. By addition of this hydrolysate to nutrient broth with the concentration of 0.1%, the growth of Bacillus sp. isolated from fish meat paste products was inhibited. The fish meat paste products containing 0.3% alginic acid hydrolysate prepared were prolonged their shelf life by 1 day stored at $30^{\circ}C$, 2 days at $20^{\circ}C$ and 4 days at $15^{\circ}C$.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.749-757
• /
• 2019

Methyltrimethoxysilane (MTMS) and trimethylethoxysilane (TMES) as starting materials were dissolved in various types of solvents, and hydrolysis with water and polycondensation reaction were carried out using various types of catalysts to prepare non-fluorinated water-repellent coating solutions. The coating solutions were spin-coated on cold-rolled steel sheets, and thermally cured to prepare water-repellent coating films. The effect of types of catalysts and solvents on the water repellency of the resulting coating films was investigated during this process. When hydrochloric acid and nitric acid, which are strong acids, were used as catalysts, the solutions showed a white opaque state due to the aggregation of siloxane polymers. On the other hand, when acetic acid, phosphoric acid, and oxalic acid, which are weak acids, were used, they were in a stable and transparent state without precipitation. As a result, the contact angles of the coated films, prepared from hydrochloric acid and nitric acid, were $58^{\circ}$ and $92^{\circ}$, respectively, showing low water repellency. On the other hand, when acetic acid, phosphoric acid, and oxalic acid were used, the contact angles of the coated films were $101^{\circ}$, $103^{\circ}$ and $116^{\circ}$, respectively, showing high water repellency. In addition, when isopropanol and ethanol were used as solvents, phase separation occurred in the solutions due to the aggregation of siloxane polymers. On the other hand, when methanol, ethyl acetate, and methyl ethyl ketone were used as solvents, the solutions were transparent and showed a stable state without sedimentation.