• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.4
• /
• pp.537-542
• /
• 2008

The protection against transient instability and consequent out-of-step condition is a major concern for the utility industry. Unstable system may cause serious damage to system elements such as generators and transmission lines. Therefore, out-of-step detection is essential to operate a system safely. Also, a multi-agent system is one that consists of a number of agents, which interact with one another. Multi-agent systems(MAS) can offer the flexibility and the adaptability to the previous algorithm. In this paper, the detection algorithm of out-of-step is designed by multi-agent system and implemented by EMTP-MODELS. To verify performance of the proposed algorithm based on multi-agent system, simulations by EMTP have been carried out.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.26 no.4
• /
• pp.343-352
• /
• 2022

We present the user-friendly graphical user interface design and implementation of Monte Carlo simulation (MCS) for computing option price of the four-underlying asset step-down equity linked securities (ELS) using the Android platform. The ELS has been one of the most important and influential financial products in South Korea. Most ELS products are based on one-, two-, and three-underlying assets. However, currently there is a demand for higher coupon payment from ELS products because of the increased interest rate in financial market. In order to allow the investors to have higher coupon payment, it is necessary to design a multi-asset ELS such as four-asset step-down ELS. We conduct the computational experiments to demonstrate the performance of the Android platform for pricing four-asset step-down ELS. Furthermore, we perform a comparison test with a three-asset step-down ELS.

• Journal of Life Science
• /
• v.28 no.5
• /
• pp.555-562
• /
• 2018

Swine influenza virus (SIV) causes one of the most common diseases of the pig population, and its subtypes are determined by hemagglutinin (HA) and neuraminidase (NA). Recently, the SIV subtype diagnosis has been developed. The method using antigen-antibody reaction rather than PCR was mainly used because of the large change in the ribonucleotide sequences of SIV. Here, we have developed 10 diagnostic primer sets through multi-nucleotide sequences alignment of spreaded SIV since 2008 in Korea and then optimized the reaction of the one-step RT-PCR for rapid determination of SIV subtype. In addition, specific primers were designed to early determine the pandemic SIV by detecting unique M sequences proven in highly infectious and virulent subtypes of the influenza H1N1 (pH1N1). Here, some of the SIVs spread in Korea from 2008 to 2014 have been tested to determine the subtypes and pandemic potential of SIV. All diagnostic primer sets were found to be able to accurately determine the SIV subtype and to detect the pandemic SIV. In conclusion, it was confirmed that the optimized one-step RT-PCR analysis using these primer sets is useful for rapid diagnosis of SIV subtypes. These results can be used for development of SIV subtype diagnostic kit to early detect before virulent SIV spreads do.

• Restorative Dentistry and Endodontics
• /
• v.21 no.2
• /
• pp.569-584
• /
• 1996

The purpose of this study was to elucidate the effect of benzalkonium chloride on tensile bond strength of BPDM/HEMA dentin bonding. One hundred sixty dentin specimens from freshly extracted bovine mandibular incisors were used, and 0, 0.02, 0.1 or 0.5% benzalkonium chloride solution was applied to the dentin specimen with/after phosphoric acid. 32% phosphoric acid was used when the specimens were bonded with One-Step$^{TM}$, a BPDM/HEMA system and 10% was used when bonded with All-Bond$^{(R)}$ 2, a NTG-GMA/BPDM system. Aelitefil$^{TM}$ composite resin was bonded to the pretreated dentin specimen with the use of All-Bond$^{(R)}$ 2 or One-Step$^{TM}$ dentin bonding agent. After the bonded specimens were stored in $37^{\circ}C$ distilled water for 24 hours, tensile bond strength was measured. The fractured dentin specimens were examined under the scanning electron microscope. The results were as follows : Benzalkonium chloride application after acid-treatment resulted in decrease of dentin bond strength of One-Step$^{TM}$, a BPDM/HEMA system (p>0.05). Benzalkonium chloride application did not exert any influence on dentin bond strength of All-Bond$^{(R)}$ 2, a NTG-GMA/BPDM system (p>0.05). There was no relationship between the concentration or application method of benzalkonium chloride and the dentin bond strength of One-Step$^{TM}$ or All-Bon$^{(R)}$ 2 (p<0.05). On SEM examination of the fractured dentin-resin interface, while mixed failure was prominent in dentin bonding with One-Step$^{TM}$, adhesive and mixed failures were seen together in dentin bonding with All-Bond$^{(R)}$ 2 regardless of the concentration and application method of benzalkonium chloride.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.5
• /
• pp.475-485
• /
• 2009

In this paper a two-step algorithm is proposed to efficiently generate rebar elements from 3D CAD data in the context of CAD/CAE data transfer. The first step is an algorithm to identify various type rebar objects and their attributes by analyzing 3D CAD data in STEP format, which is one of the international data standards. The second algorithmic step is a procedure to generate one-dimensional rebar elements from the object data made through the first step for finite element analysis or other CAE tasks. Successful rebar element data generation from real 3D CAD data for a reinforced concrete structure shows the efficacy of the proposed algorithm.

• Archives of Pharmacal Research
• /
• v.12 no.4
• /
• pp.254-256
• /
• 1989

Synthesis of spiro 1, 4-dihydropyridines by a novel and facile one step method is reported. Structures and reaction are also reported with a support by another synthetic routes.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.254-255
• /
• 2004

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.318-321
• /
• 1997

This paper is about improving characteristic of plant by using micro-step driver method in 5 phase step motor for satisfying the condition of low oscillation and high accuracy in soldering machine. We choose open loop control method for minimizing hardware system and use one chip microprocessor, power MOSFET nd some device to realize accurate micro-step driver system.

• East Asian mathematical journal
• /
• v.26 no.5
• /
• pp.607-614
• /
• 2010

In this paper, we obtain geodesic formula of a certain class of Pseudoriemmanian 2-step nilpotent groups and show a constancy of represenation matrix of Jacobi oprerators along geodesics in Pseudoriemmanian 2-step nilpotent groups with one dimensional center.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.6
• /
• pp.91-95
• /
• 1982

One significant problem which arises during the fabrication of LSI and/or VLSI is how to make a good step coverage for aluminum. One way developed in this study is to flow PSG containing 8.0 wt.% - 8.6 wt.% of phosphorus at 95$0^{\circ}C$ for 30 minutes in steam and to depo3it aluminum of 1 urn thickness at $250^{\circ}C$.