• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.1
• /
• pp.34-39
• /
• 1999

Removal of spilled oil over the sea and the river has become one of the urgent problems in these days. Removing oil using mechanical devices by adhesion method is known to be closely related with the problem of estimating the thickness of film remaining on the surface of solid withdrawn from a quiescent liquid. In the present study a series of experimental results are compared with the analytic estimation for the thickness of film remaining on the solid surface using non-dimensional analysis. For the case of pure water both results show the remarkable agreement. However, discrepancy has been found for the case of Bunker C oil and diesel oil. The analytic estimation over-predicts the experimental value for the case of Bunker C oil and under-predicts it for the case of diesel oil. Further study is required to investigate the real situation including a contact angle and the property difference between oil and water.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.665-668
• /
• 2000

This paper presents development of a different substance monitoring system base reliable detection between the conveyer belt and hopper used lot materials transport line of steel company. Conventional detection method of a piece of iron separation system is losed the confidence, because of the place with bad surroundings of measurement so much that materials Production line are completely exposed to dust, moisture and vibration. For the solution of this problem, we developed a different substance detection system using the acoustic emittion sensor and one chip microprocessor which is available for bad surroundings and inexpensive. The reliability of the system was estimated by experiment.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.3
• /
• pp.205-215
• /
• 2001

Continuously variable transmission(CVT) mechanisms considered here combine the functions of a 2K-H I type differential gear unit and a V-belt continuously variable unit(CVU). One shaft of the V-belt CVU is connected directly to the differential gear unit and remaining shaft of it is linked to the output shaft. These mechanisms have many advantage which are the decrease of CVT size, the increase of overall efficiency, the extension of speed ratio range, and the generation of geared neutral. In this paper six different mechanisms of output coupled type CVT are proposed. Some useful theoretical formula related to speed ratio, power flow and efficiency are derived and analyzed, and theoretical analysis are proven by various experiments.

• Textile Coloration and Finishing
• /
• v.13 no.1
• /
• pp.68-75
• /
• 2001

Tensile and shrinkage characteristics of DTY, EDY and Macel were investigated experimentally. The drawn textured yarn(DTY) made by an existing belt type false twist and the elastic drawn textured yarn(EDY) made by non-torque false twist method modified from the belt type one. Macel was the yarn which had drawn and un-drawn arrangements. The tenacity of EDY had lower value than that of DTY. EDY had higher strethch than that of DTY. Especially Macel yarn had higher stretch than that of DTY compared with the same diameter of yarn. With time course behavior the tenacity and elongation of DTY and EDY had stabled tendency without variation. Before scouring Process, the wet and dry shrinkage patio of EDY load higher value than that of DTY. However, they decreased artier the process. At the same time, the stretch characteristic of EDY was significant as the diameter of yarn became higher.

• Journal of Power Electronics
• /
• v.11 no.3
• /
• pp.319-326
• /
• 2011

Nowadays numerous research projects are being conducted in the field of electric motors. Non-modeling of flexible connections such as couplings and the belt-pulley do not show some real behaviors. With an increase in the number of connections and drive factors, these Non-modeled modes become more important. The coupling of two electric motors, instead of one motor, in submarine propeller force is an obvious example which shows that Non-modeled vibration modes caused by flexible connections can disturb controller operation and make undesirable vibrations in the submarine body. In this paper a dynamic model of flexible connections and a completed dynamic model of two different coupled electric models is presented. A robust controller for the completed model is also amended so that the two controlling targets of a desired speed adjustment and an appropriate load division between the two motors with sufficient accuracy are achieved.

• Journal of Korean Society for Quality Management
• /
• v.35 no.1
• /
• pp.113-123
• /
• 2007

This paper considers the development of e-learning training program for the six sigma green belt. Comparative studies of existing e-learning programs are performed and a new one is proposed. A catapult simulator is developed and the automatic grading function which immediately computes the result of the catapult simulation and gives feedback to the trainees is presented. An illustrative example is also given.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.295-300
• /
• 2020

Since China opened its door to the world in 1978, its economic development had been concentrated in the Eastern and Western area compared with the middle area. From 2000s, the Chinese government started to develop the middle area in terms of balanced development. With this goal, "Plan on Zhengzhou Airport Economy Zone", and "One Belt and One Road" has implemented in Zhengzhou, where is the an important traffic center in middle area. Meanwhile, the foreign trade of Zhengzhou has been increased about 10 times between 2009 and 2018. In particular, its growth is the fastest among six central cities in 2018 from the lowest in 2009. This study investigates whether the Chinese government policy has an effect on the foreign trade of Zhengzhou. We find that based on the regression analysis of the Principal Component Analysis (PCA), the government policies has a positive impact on the development of Zhengzhou's foreign trade. It is meaningful that the government policy focused on the advantage of Zhengzhou contributes its development of foreign trade.

• Korea Trade Review
• /
• v.46 no.3
• /
• pp.119-133
• /
• 2021

After 'Zhou Chuchu (走出去, Go global)' in the early 2000s, and with the 'One-to-One Road' initiative in 2012, China's Overseas Foreign Direct Investment (OFDI) has increased significantly, resulting in high academic interest. The purpose of this study is to analyze the impact of national risks of home country on China's OFDI by using data from 49 countries along the 'One-to-One Road' between 2007 and 2018, and to compare the factors of national risks that attract investment from the world. As a result of the study, market economy companies' perceptions of national risks are mostly negative, so risk acts as a deterrent to investment. On the other hand, national risks of home countries have had positive effects on China's OFDI, which would mean that Chinese investors, mostly state-owned enterprises have a high tendency to invest in regions or countries with high national risks. Other economic factors, such as the size of the investment partner country's market, GNI per capita, and trade openness, had a positive (+) effect, and natural resources had a negative (-) effect on China's OFDI. As dummy variables, FTA, which is an economic and diplomatic factor, SCO, which is a political and diplomatic factor, and bordering which is a geographical factor, were also found to have a positive (+) effect. This study implies the investment pattern of China's OFDI is due to the characteristics of China's unique geopolitical and economic system, and it is judged to be influenced by political and strategic factors, especially the aspects led by state-owned enterprises.

• Journal of the Korea Safety Management & Science
• /
• v.23 no.1
• /
• pp.31-38
• /
• 2021

port is the intersection of highway, railway, waterway and other transportation modes, and is the key to realizing integrated transportation. There are many excellent ports around the Tumen River Region. With the obvious location advantages, Tumen River Region is an important part of Tumen River regional cooperation and development, and is the key to realizing the "borrow port to sea", which is raised in "China Tumen River regional cooperation and development planning outline -- regard Changjitu area as the development and opening leading area" (referred to as "planning outline"). This paper focus on the main ports in the Tumen River region, taking them as the research object. Furthermore, the paper makes the strategic plan for the port cluster in the Tumen River region as well as puts a collaboration scheme is proposed by analyzing the research reviews of the Tumen River region and the present situations of the main ports.

• Journal of Fashion Business
• /
• v.7 no.2
• /
• pp.15-25
• /
• 2003

In this study on the Persiandress called Persiandress or Mediandress, its names, styles, and structures that are still subject to a great deal of controversy were investigated. In addition, the reason why the Persiandress was wrongly named as Kandys by the early researchers was also examined. The documents of reliefs on the Apadanastairs in Persepolis and the European papers concerning this themes were subject of this analysis. Such investigation and examination results are summarized as follows. There is still no agreed name describing the Persiandress, which is called "Persiandress" or "Mediandress". Further, there is no definite conclusion on whether the Persiandress was made in one piece or two pieces. The first person who insisted that the Persiandress was made in one piece is a German archaeologist, Ernst Herzfeld. He said that the Persiandress was made in one long tetragonal piece, had a hole in the middle for head, and had lots of pleats when it was tied with a belt. On the contrary, researchers who insisted that the Persiandress was made in two pieces stressed the sleeve pleats in four folds, which is one of the representative characteristics, and said that such four-fold sleeve pleats would not be formed when the Persiandress was made in one piece and worn by a belt. Consequently, they have conducted studies according to their insistence and the resultant pattern. Kandys, the Median's typical dress, is a coat worn over the jacket and trousers. Although it had sleeves, the Median did not use them. Indeed, Kandys was used as a kind of cloak. However, the wrong term, Kandys is still used in Korea. So, it is necessary to correct use of such wrong term.