• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.301-302
• /
• 2008

In this paper, we present an algorithm which decrease a frequency offset effect for 868MHz IEEE 802.15.4b LR - WPAN (Low Rate - Wireless Personal Area Network) receiver. The proposed method improve the robustness to frequency offset and receiver's stability using the multiple delay differential filter of receiver correlator.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.6
• /
• pp.477-481
• /
• 2014

Flexible electronics have been to the fore because it is believed that flexibility can add incredible value such as light weight and mobility into the existing electronic devices and create new markets of large-area and low-cost electronics such as wearable eletronics in near future. Offset printing processes are regarded as major candidates for manufacturing the flexible electronics because they can provide the patterning resolution of micron-size effectively in large-area. In view of mechanics, the most important viewpoint in offset printing is how to achieve the synchronized movement of two contact surfaces in order to prevent slip between two contact surfaces and distortion of the blanket surface during ink transfer so that the high-resolution and good-overlay patterns can be printed. In this paper, a novel low-cost measurement method of the synchronization error using the motor control output signals is proposed and the compensation method is presented to minimize the synchronization error.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.9
• /
• pp.47-54
• /
• 2004

The previous works for WLAN system based on OFDM is mainly individual study for independent frequency offset or symbol synchronization. In this paper, the performance of IEEE 802.11a WLAN(Wireless Local Area Network) system in the realistic indoor multipath channel models is analyzed with frequency offset compensation and channel estimation methods. For the performance analysis of the WLAN system indoor Rayleigh multipath channels are adopted, and the BER(Bit Error Rate) of WLAN system is calculated with y2 code-rate 16-QAM based on standard specification. From the simulation results, the difference of required Eb/No for BER of 10-3 is 1-2dB between the channel estimation and frequency offset compensation, and perfect channel estimation and no frequency offset.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.187-190
• /
• 2007

The Geostationary Ocean Color Imager (GOCI) is under development to provide a monitoring of ocean-color around the Korean Peninsula from geostationary platforms. It is planned to be loaded on Communication, Ocean, and Meteorological Satellite (COMS) of Korea. The GOCI has been designed to provide multi-spectral data to detect, monitor, quantify, and predict short term changes of coastal ocean environment for marine science research and application purpose. The target area of GOCI observation covers sea area around the Korean Peninsula. Based on the nonlinear radiometric model, the GOCI calibration method has been derived. The nonlinear radiometric model for GOCI will be validated through ground test. The GOCI radiometric calibration is based on on-board calibration devices; solar diffuser, DAMD (Diffuser Aging Monitoring Device). In this paper, the GOCI radiometric error propagation is analyzed. The radiometric model error due to the dark current nonlinearity is analyzed as a systematic error. Also the offset correction error due to gain/offset instability is considered. The radiometric accuracy depends mainly on the ground characterization accuracies of solar diffuser and DAMD.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.3-13
• /
• 2013

This paper contains two algorithms proposed for synchronization in OFDM system. The first is having 1 symbol offset while calculating the timing metric, and the second is introduced in new parameter such as Reduction Factor(${\rho}$), Break Constant(${\beta}_k$) and Implant Depth(${\delta}_I$) in order to control the power of CP(Cyclic Prefix) area. Two proposed method are evaluated performance with conventional methode, and than the result of simulation show proposed methods is better than conventional methode while it experience into multipath fading channel.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.3
• /
• pp.1-10
• /
• 2014

Offset paper printing is a promising roll-to-roll technique for color printed materials. Although it is no doubt that understanding ink transfer mechanism in offset printing process is necessary to achieve high printing quality, investing the relationship between inks and substrates at the nip is difficult experimentally due to high printing speed. In this paper, rheological behavior and splitting point of the ink at the nip is studied using package software Ployflow and Flow 3D based on Navier-Stokes equation. Polydimethylsiloxane (PDMS) ink and IGT printability tester were used for an model ink and experiment to compare with that of simulation data, respectively. As a result, higher viscosity at state flow and pressure increased ink transfer due to higher possibility of presence of cavitation at the nip and increase in covering area ratio. These results have shown good agreements with experimental data compared by measuring density of print through.

• Journal of Advanced Navigation Technology
• /
• v.8 no.2
• /
• pp.163-168
• /
• 2004

In this paper, we propose a frequency synchronization algorithm using characteristic of CAZAC sequence for HDR-WPAN and analyze the performance by signal constellation and EVM(error vector magnitude). The proposed frequency offset technique estimated each sample phase error of two sequences among 12 CAZAC sequences which have excellent autocorrelated characteristic. Estimated phase error is multiplied to each sample of next sequence for compensating the frequency offset. The remaining frequency offset after compensating it with two sequences has maximum 0.002 offsest ranges at each sample. The computer simulation proved that the permission of EVM value had satisfied in the case of DQPSK at 20[dB].

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.5
• /
• pp.371-381
• /
• 2021

A machine vision inspection system consists of a camera, optics, illumination, and image acquisition system. Especially a scanning system has to be made to measure a large inspection area. Therefore, a machine vision line scan camera needs a line scan light source. A line scan light source should have a high light intensity and a uniform intensity distribution. In this paper, an offset calibration and slope calibration methods are introduced to obtain a uniform light intensity profile. Offset calibration method is to remove the deviation of light intensity among channels through adding intensity difference. Slope calibration is to remove variation of light intensity slope according to the control step among channels through multiplying slope difference. We can obtain an improved light intensity profile through applying offset and slope calibration simultaneously. The proposed method can help to obtain clearer image with a high precision in a machine vision inspection system.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.1
• /
• pp.1-9
• /
• 2007

• Journal of Aerospace System Engineering
• /
• v.11 no.3
• /
• pp.16-21
• /
• 2017

In this paper, we propose a new folding method (the blossom method) to increase storage efficiency of drag-sail. To resolve the issue caused by increase in the thickness of the sail, we allowed margin space (offset) along the folding line and made holes at the intersection of offset lines to prevent distortion of film. In addition, to verify applicability of the blossom method, we fabricated quarter of the sail by using Mylar film and conducted a deployment experiment. If the blossom method is applied, storage ratio (storage volume: deployed area) is 1: 68.64, that is approximately 1.88 times more than the z-fold method of folding sailing.