• The korean journal of orthodontics
• /
• v.9 no.1
• /
• pp.85-98
• /
• 1979

This investigation was designed to compare the craniofacial and dental morphology of class III malocclusion with that of normal occlusin in children, and to determine the incidence of various class III craniofacial skeletal patterns. The material selected for this study consisted in standard lateral cephalograms of eighty two Korean children, forty one boys and forty one girls, aged 10 through 12 years, having class III malocclusion, and forty two Korean children, twenty boys and twenty two girls, with normal occlusion in the same age. Using the tracings of the standard lateral cephalograms, various angular and linear measurements were recorded, tabulated and statistically analyzed, and then the class III craniofacial skeletal morphology was divided into various patterns by the degree of SNA and SNB, which respectively were below, within or beyond the normal range of those of normal occlusion. The following characteristics of the craniofacial and dental morphology of class III malocclusion were observed. 1. The cranial base length of class III malocclusion was smaller than that of normal occlusion, and the small saddle angle was a characteristic figure of class III malocclucion. 2. Maxillary length of class III malocclusion was smaller than that of normal occlusion, and point A was retropositioned relative to cranial base but not PNS in class III malocclusion. Maxillary base inclination was not significantly different between the two, but occlusal plane to palatal plane was small in class III malocciusion. 3. The mandibular body length shown no difference between the two, but the mandibular body positioned anteriorly relative to cranial base in class III malocclusion. Ramus height, gonial angle, and mandibular effective length were large in class III malocclusion. Mandibular plane angle and joint angle had no difference between the two, and occlusal plane to mandibular plane angle was large in class III malocclusion. 4. Maxillary incisor inclination was not significantly different between class III malocclusion and normal occlusion, but mandibular incisors positioned and inclined lingually and consequently interincisal angle was large in class III malocclusion. 5. Class III malocclusion was divided into six categories of craniofacial skeletal pattern. The most common class III pattern was found to be one in which the maxilla was within the normal range of prognathism while the mandible extended beyond this range. The pattern in which the maxilla was below the normal range of prognathism while the mandible was within this range was approximately one fifth of the class III sample.

• The korean journal of orthodontics
• /
• v.48 no.1
• /
• pp.11-22
• /
• 2018

Objective: The aim of this study was to determine cephalometric factors that help predict favorable soft-tissue profile outcomes following treatment with the Class II Twin-block appliance. Methods: Pre- and post-treatment lateral cephalograms of 45 patients treated with the Class II Twin-block appliance were retrospectively analyzed. Profile silhouettes were drawn from the cephalograms and evaluated by three orthodontists in order to determine the extent of improvement. Samples were divided into a favorable group (upper 30% of visual analogue scale [VAS] scores, n = 14) and an unfavorable group (lower 30% of VAS scores, n = 14). Skeletal and soft-tissue measurements were performed on the cephalograms and an intergroup comparison was conducted. Results: An independent t-test revealed that the following pre-treatment values were lower in the favorable group compared to the unfavorable group: lower incisor to mandibular plane angle, lower incisor to pogonion distance, point A-nasion-point B angle, sella-nasion line (SN) to maxillary plane angle, SN to mandibular plane angle, gonial angle, and symphysis inclination. The favorable group had a larger incisor inclination to occlusal plane. Moreover, the favorable group showed larger post-treatment changes in gonial angle, B point projection, and pogonion projection than did the unfavorable group. Conclusions: Class II malocclusion patients with a low divergent skeletal pattern and reduced lower incisor protrusions are likely to show more improvement in soft-tissue profile outcomes following Class II Twin-block treatment.

• The korean journal of orthodontics
• /
• v.25 no.3 s.50
• /
• pp.299-310
• /
• 1995

The purpose of this study is to know about the positional change of second molar when orthodontic treatment is performed. To know about it, we andlysed cephalogram pre. and post treatment for 54 adult patients who werefinished orthodontic treatment by banding to the first molar and classify them into 4 groups Class I extraction group 15, Class I nonextraction group 12, Class II group 13, class Class III group 14. The following conclusions were obtained : 1. In the extraction group of Class I , mandibular second molar showed less extrusion and mon distal inclination than first moarl. But maxillary second molar showed more or less extrusive and mesial inclination to much the same degree of first molar. 2. Inthe non-extractio group of Class I, mandibular second molar in intrusive to first molar, it showed smilar distal inclination to first molar. But maxillary second molar is extrusive similarly to first molar. 3. In the group of Class II , mandibular second molar is less extrusive than first molar and maxillary second molar is more extrusive than first molar. 4. In the group of Class III, mandibular second molar showed similar extrusion to first molar and more distal inclination than first molar. But maxillary second molar showed less extrusion than first molar. 5. A comparision of the positional change of second molar among groups : The change of distance from FH plane to funcation point of maxillary second molar is the difference between Class I extraction group and Class II group, Class I extraction group and Class III group. The change of maxillary second molar to palatal plane and occlusal plane is the difference between Class I extraction group and Class III group. And the change of distance from mandibular plan to furcation point of mandibular second molar is difference between Class I extraction group and non-extraction group, Class I non-extraction group and Class II group, Class I non-extraction group and Class III group. But the change of angle of mandibular second molar to mandibular plane and occlusal plane is make no difference in among groups.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.855-864
• /
• 1998

The purposes of this study were to evaluate the cephalometric characteristics of Korean female patients with Class II division 2 malocclusion and to compare Korean females with Caucasian females who had same type of malocclusion. All of the samples had Class II division 2 malocclusion with deep overbite (more than 4mm) and full permanent dentition. These samples were divided into two groups according to the races: Group 1(N=16; Korean females; average age=18Y 2M) and Group 2 (N:20; Caucasian females; average age=14Y 2M). The pretreatment lateral cephalograms were measured, analyzed and compared by using 38 variables and independent t-test. And the results were as follows: 1. Although there were no differences in Overbite, SN to mandibular plane angle, Palatomandibular plane angle, and FMA between Group 1 and 2, the other vertical relation variables of maxilla and mandible (SN to palatal plane angle, SN to occlusal plane angle, ODI) of Group 1 showed more clockwise rotation tendency of occlusal plane and less hypodivergency tendency than those of Group 2. 2. There were no differences in mandibular body length and ramus height between Group 1 and 2 except small upper genial angle of Group 1. There was less counterclockwise rotation tendency of mandible in Group 1. 3. There were no statistical significant differences in UAFH/LAFH and PFH/AFH between Group 1 and 2. 4. Although there were no differences of overjet and anteroposterior position of mandible between Group 1 and 2, the position of maxilla of Group 1 was more retropositioned than that of Group 2. 5. Except the more protrusion of lower incisor to A-Pog of Group 1, there were no differences of inclination and distance of upper and lower incisors to basal plane between Group 1 and 2. 6. The distance from upper- first molar to palatal plane showed no difference between Group 1 and 2. But the distance from lower first molar to mandibular plane of Group 1 was greater than that of Group 2. So it may be partially related to the clockwise rotation of occlusal plane and the less counterclockwise rotation tendency of mandible of Group 1. 7. Group 1 had more protrusive upper and lower lips than Group 2.

• The korean journal of orthodontics
• /
• v.16 no.2
• /
• pp.107-114
• /
• 1986

This study was undertaken to determine the adequate bracket position in Korean. The subjects were consisted of casts and photographs of 30 males & 30 famales. They had acceptable profile, normal occlusion, no loss of teeth and no experience of dental treatment. The following conclusions were obtained. 1. In case of no necessity of the posterior teeth movement, bracket angulation was made automatically by paralleling the bracket slot with occlusal plane. 2. Axial inclination of all teeth were measured, and those of canine & premolar were much variable. 3. Adequate bracket position of Korean occlusion were obtained.

• Journal of Oral Medicine and Pain
• /
• v.24 no.2
• /
• pp.189-206
• /
• 1999

This study was performed to investigate the factors affecting muscle activity and cephalometric variables according to change of head postures. For this study, 150 patients with temporomandibular disorders and 80 dental students without any signs and symptoms of temporomandibular disorders were selected as the patients group and as the normal group, respectively. Head position to body-midline in frontal plane and upper quarter posture to body plumb line in sagittal plane were observed clinically and electromyographic(EMG) activity of anterior temporalis, masseter, sternocleidomastoideus, and trapezius on clenching were recorded with $BioEMG^{(R)}$ in four head postures, which were natural head posture(NHP), forward head posture(FHP), $20^{\circ}$ upward head posture(UHP), and $20^{\circ}$ downward head posture(DHP). Cephaloradiographs were also taken in the same head postures as in EMG taking, but that was taken only in NHP for the patient group. Cephalometric variables measured were SN angle, CVT angle, atlas inclination angle, occlusal plane angle, Me-C2 angle, pharyngeal width, occiput~axis distance, area of pharyngeal space, and cervical curvature. The data were analyzed by SAS statistical program. The results of this study were as follows : 1. Between the patient and the normal group, there were significant difference in distance from plumb line to acromion, eye-tragus angle, electromyographic activity of the four muscles, and cephalometric variables of linear measurement. 2. There was no consistent pattern of correlation between upper quarter posture, EMG activity and cephalometric variables in any case without relation to cervical curvature and head position in frontal plane. 3. Sternocleidomastoid muscle only showed variation of electromyographic activty with changes of head postures, but all the muscles did show correlation with head postures. 4. All the cephalometric variables measured in this study showed difference of mean value by head posture, and CVT angle, pharyngeal width, occiput-atlas distance, and area of pharyngeal space showed correlation between these variables with change from NHP to FHP, and from NHP to UHP.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.3
• /
• pp.637-649
• /
• 1997

Early orthodontic treatment in growing children requires the removable orthodontic appliances. The removable orthodontic appliance can be used in the primary dentition and mixed dentition. The purposes of use of removable orthodontic appliance in prmary dentition or mixed dentition are the interception of skeletal or dental malocclusion, guiding the normal dentition, and retention after comprehensive orthodontic treatment. Therefore, it is needed to use the removable orthodontic appliance in children with malocclusion. This report presents cases of growing children with skeletal class II and III malocclusion treated with removable orthodontic appliance during mixed dentition and Multiloop Edgewise Arch Wire(MEAW) during permanent dentition. The results obtained through these cases were summarized as follows : 1. Removable orthodontic appliances guide normal dentition and skeletal growth in growing children. 2. Removable orthodontic appliances play an important role in intercepting malocclusion in mixed dentition before use of fixed orthodontic appliance. 3. MEAW can be applied to finishing stage of all cases and is effective in correction of occlusal plane, achievement of interdigitation, and control of dental inclination. 4. It is needed that removable appliances are used during mixed dentition through correct diagnosis and fixed appliance are used in permanent dentition.

• The korean journal of orthodontics
• /
• v.35 no.3 s.110
• /
• pp.163-173
• /
• 2005

The purpose of this study was to compare the asymmetric degree between maxillofacial hard and soft tissues in individuals with facial asymmetry. Computerized tomographies (CT) of 34 adults (17 male, 17 female) who had facial asymmetry were taken. The CT images were transmitted to personal computers and then reconstructed into three-dimensional (3D) images through the use of computer software. In order to evaluate the degree of facial asymmetry, 6 measurements were constructed as the hard tissue measurements while 6 counterpart measurements were taken as the soft tissue measurements. The means and standard deviations were obtained for each measurement using 3D measure, then t-test was used to investigate the differences between each hard tissue measurement and the corresponding soft tissue measurement All measurements used in the present study showed statistically significant differences between the hard and soft tissues. The degree of soft tissue asymmetry was smaller than that of corresponding hard tissue asymmetry in case of chin deviation, frontal ramal inclination difference, and frontal corpus inclination difference. On the other hand, the degree of soft tissue asymmetry was greater than that of underlying hard tissue asymmetry in the measurement of lip canting and lip cheilion height difference The present study suggests that asymmetric differences of hard and soft tissue is observed nu facial asymmetric subjects and thus soft tissue analysis is needed in addition to hard tissue analysis when making an evaluation of facial asymmetry.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.3
• /
• pp.153-159
• /
• 2013

Purpose: Nowadays, checkbite methods and a digital sensor are used to analyze the movement of mandible. However, there are no study comparing two methods. Therefore, this study has compared measuring the condylar inclination methods by using the new ARCUSdigma 2 system and the checkbite method. Materials and methods: Young 20 adults without any orthodontic treatment experiences, missing teeth, and restorations with the change of occlusal plane were tested. Angles of condylar path were measured 3 times each, based on Camper's line, by using two methods. KaVo PROTAR Evo 7 semi-adjustable articulator was used and the data were statistically analyzed. Results: 1. The anterior sagittal condylar inclination by ARCUSdigma 2 system were measured as $26.97^{\circ}({\pm}7.38^{\circ})$ on the left side and $29.80^{\circ}({\pm}8.19^{\circ})$ on the right side. The lateral condylar inclination were measured as $5.75^{\circ}({\pm}3.47^{\circ})$ on the left side and $8.10^{\circ}({\pm}4.98^{\circ})$ on the right side. 2. The anterior sagittal condylar inclination by checkbite method were measured as $25.20^{\circ}({\pm}6.53^{\circ})$ on the left side and $28.18^{\circ}({\pm}7.38^{\circ})$ on the right side. The lateral condylar inclination were measured as $10.97^{\circ}({\pm}5.63^{\circ})$ on the left side and $12.03^{\circ}({\pm}5.22^{\circ})$ on the right side. There was no statistically significant difference between male and female (P>.05). 3. The lateral condylar inclinations of ARCUSdigma 2 were statistically significantly smaller than that of checkbite method (P<.05). Conclusion: In Both of 2 methods, there was no statistically significant difference between male and female (P>.05). However, the lateral condylar inclinations of ARCUSdigma 2 were statistically significantly smaller than that of checkbite method (P<.05).

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.4
• /
• pp.264-271
• /
• 2011

Purpose: This study evaluated retrospectively the postsurgical facial hard tissue profile of a Le Fort I osteotomy with/without posterior impaction and rigid internal fixation to correct mandibular prognathism. After observing a difference between the two groups, this measurement was used to prepare a treatment plan for 2-jaw surgery. Patients and Methods: Thirty patients who had undergone orthognathic surgery in Pusan National University Dental Hospital were enrolled in this study. Fifteen patients were treated using a Le Fort I osteotomy with posterior impaction and mandibular setback bilateral sagittal split ramus osteotomy, and the other fifteen patients were treated without posterior impaction. The preoperative (T0), immediate postoperative (T1) and six-month follow-up period (T2) cephalograms were taken and difference between T1-T0 and T2-T2 was analyzed. Results: Both groups was FH-ABp, SNB and ANB showed significant changes in the measurement, whereas only the posterior impaction group showed a change in the SN-U1, occlusal plane, posterior facial height, surgical movement difference from the L1 and B-point. There was no significant statistical change between the immediate postoperative (T1) and six-month follow-up (T2) hard tissue analysis in the two groups. Conclusion: A Le Fort I osteotomy with posterior impaction is considerable for patients with a flat occlusal plane angle, large posterior facial height, prominent B-point, pogonion and labioversed incisal inclination if the indications are well chosen.