• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2212-2214
• /
• 2003

We design a sliding mode cascade observer to estimate state of the output. In the 1st step of the observer, the output will be estimated, and the 1st order state of the output will be estimated via the 2nd step of the observer. Also, nth order state of the output will be estimated in the n+1th step of the observer. Therefore, this paper will be presented to design the slide mode observer of cascade based cascading convergence concept of state observer error.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• v.5 no.1
• /
• pp.46-52
• /
• 2002

A robust nonlinear observer, utilizing the sliding mode concept, is developed for the dynamic positioning of ships. The observer provides the estimates of linear velocities of the ship and bias from slowly varying environmental loads. It also filters out wave frequency motion to avoid wear of actuators and excessive fuel consumption. The main advantage of the proposed observer is in its robustness. Especially, the observer structure with a saturation function makes the proposed observer robust against neglected nonlinearties, disturbances and uncertainties. Since the mathematical model of DP ships is difficult to obtain and includes uncertainties and disturbances, it is very important for the observer to be robust. A nonlinear output feedback controller is derives based on the developed observer using the observer backstepping technique, and the global stability of the observer and control law is shown by Lyapunov stability theory.. A set of simulation was carried out to investigate the performance of the proposed observer for dynamic positioning of ships.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.7
• /
• pp.613-616
• /
• 2012

This paper proposes the state observer design for nonlinear systems with delayed output. It is shown that by considering a nonlinear term of error dynamics as an additional state variable, the nonlinear error dynamics with time delay can be transformed into the linear one with time delay. Sufficient conditions for existence of a state observer are characterized by linear matrix inequalities. Finally, an illustrative example is given in order to show the effectiveness of our design method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.8
• /
• pp.818-822
• /
• 2009

In this paper, we consider a decentralized observer design problem for fault detection in large-scaled linear time-invariant systems. Since the fault detection residual is desired to be sensitive on the fault, we use the H_ index performance criterion. Sufficient conditions for the existence of such an observer is presented in terms of linear matrix inequalities. Simulation results show the effectiveness of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.26.4-26
• /
• 2001

This paper proposes a dynamic observer that is applicable to linear time-invariant systems subject to unknown inputs. The proposed method utilizes the output feedback control structure to design an unknown input observer. We name it as the dynamic unknown input observer(UIO). The dynamic UIO can be designed easily compared to the usual static UIO, and the system response could be improved.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.6
• /
• pp.487-493
• /
• 2001

In this paper, a new reduced-order dynamic observer method is presented. Two types of observers are pronounced, namely, the model based reduced-order dynamic observer and the Luenburger type reduced-order dynamic observer. Useful design algorithms are also provided for each structure. The essential features of the proposed observed design methods are addressed to be qualified ad effective observers. The proposed method clarifies the duality between the controller and observer designs.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.284-284
• /
• 2000

In adaptive fuzzy control systems. fuzzy systems are used to approximate the unknown plant nonlinearities. Until now. most of the papers in the field of controller design for nonlinear system using fuzzy systems considers the affine system with fixed grid-rule structure based on system state availability. This paper considers observer-based nonlinear controller and dynamic fuzzy rule structure. Adaptive laws for fuzzy parameters for state observer and fuzzy rule structure are established so that the whole system is stable in the sense of Lyapunov.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1128-1130
• /
• 1996

A canonical form observer design method for nonlinear systems is studied. Through this method, an observer of single link robot system with flexible joint is proposed. It is shown through simulation that the system can be stabilized when using the nonlinear feedback linearizing controller and the supposed observer.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2489-2492
• /
• 2003

In this paper, observer-based H$\sub$$\infty$/ controller design method for singular systems with time-varying delay by Just one LMI condition is presented. The sufficient condition for the existence of controller and the controller design method are presented by one perfect LMI approach. The design procedure involves solving an LMI. Since the obtained condition can be expressed as an LMI form, all variables including feedback gain and observer gain can be calculated simultaneously by Schur complement and changes of variables.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.11
• /
• pp.883-890
• /
• 2003

Two GOS (Generalized Observer Scheme) type Fault Detection Isolation Schemes (FDIS), employing the bank of unknown input functional observers (UIFO) as a residual generator, are proposed to make the practical use of the multiple observer based FDIS. The one is IFD (Instrument Fault Detection) scheme and the other is PFD (Process Fault Detection) scheme. A design method of UIFO is suggested for robust residual generation and reducing the size of the observer bank. Several design objectives that can be achieved by the FDI schemes and the design methods to meet the objectives are described. An IFD system is constructed for the Boeing 929 Jetfoil boat system to show the effectiveness of the propositions. Major contributions of this paper are two folds. Firstly, the proposed UIFO approaches considerably reduce the size of residual generator in the GOS type FDI systems. Secondly, the FDI schemes, in addition to the basic functions of the conventional observer-based FDI schemes, can reconstruct the failed signal or give the estimates of fault magnitude that can be used for compensating fault effects. The schemes are directly applicable to the design of a fault tolerant control systems.