DOI QR코드

DOI QR Code

On the Fault Detection and Isolation Systems using Functional Observers

함수 관측자를 이용한 고장검출식별기법에 관한 연구

  • 이기상 (단국대학교 전기전자컴퓨터공학부) ;
  • 류지수 (단국대학교 대학원 전기공학과)
  • Published : 2003.11.01

Abstract

Two GOS (Generalized Observer Scheme) type Fault Detection Isolation Schemes (FDIS), employing the bank of unknown input functional observers (UIFO) as a residual generator, are proposed to make the practical use of the multiple observer based FDIS. The one is IFD (Instrument Fault Detection) scheme and the other is PFD (Process Fault Detection) scheme. A design method of UIFO is suggested for robust residual generation and reducing the size of the observer bank. Several design objectives that can be achieved by the FDI schemes and the design methods to meet the objectives are described. An IFD system is constructed for the Boeing 929 Jetfoil boat system to show the effectiveness of the propositions. Major contributions of this paper are two folds. Firstly, the proposed UIFO approaches considerably reduce the size of residual generator in the GOS type FDI systems. Secondly, the FDI schemes, in addition to the basic functions of the conventional observer-based FDI schemes, can reconstruct the failed signal or give the estimates of fault magnitude that can be used for compensating fault effects. The schemes are directly applicable to the design of a fault tolerant control systems.

Keywords

References

  1. R. N. Clark, 'Instrument fault detection,' IEEE Trans. Aerospace and Electronic Systems, vol. 14, no. 3, pp. 456-465, 1978 https://doi.org/10.1109/TAES.1978.308607
  2. A. S. Willsky, 'A survey of design methods for failure detection in dynamic systems,' Automatica, vol. 12, no. 3, pp. 601-611, 1976 https://doi.org/10.1016/0005-1098(76)90041-8
  3. R. N. Clark, 'State estimation schemes for instrument fault detection,' in Fault Diagnosis in Dynamics Systems, edited by R. Patton, P. M. Frank and R. N. Clark, Prentice-Hall, 1989
  4. G. Betta and A. Peitrosanto, 'Instrument fault detection and isolation: State of art and new research trends,' IEEE Trans. Instrumentation and measurements, vol. 49, no. 1, pp. 100-107, 2000 https://doi.org/10.1109/19.836318
  5. A. D. Pouliezos and G. S. Stavrakakis, Real-time fault monitoring of industrial processes, Kluwer Academic Pub., 1994
  6. P. M. Frank, 'On-line fault detection in uncertain nonlinear systems using diagnostic observers: A survey,' International Journal of System Science, vol. 25, no. 12, pp. 2129-2154,1994 https://doi.org/10.1080/00207729408949341
  7. Z. Kowalczuk and J. Gertler, 'Generating analytical redundancy for fault detection systems using flow graphs,' Proc. of IFAC Low Cost Automation, Vienna, Austria, pp. 277-282, 1992
  8. M. Darouach, 'Existence and design of functional observers for linear systems,' IEEE Trans. Automatic Control, vol. 45, no. 5, pp. 940-943, 2000 https://doi.org/10.1109/9.855556
  9. M. Hou. A. C. Pugh and P. C. Muller, 'Disturbance decoupled functional observers,' IEEE Trans. Automatic Control, vol. 44, no. 2, pp. 382-386,1999 https://doi.org/10.1109/9.746272
  10. M. J. Er and B. D. O. Anderson, 'Design of reduced order multirate output linear function observer based compensators,' Automatica, vol. 31, no. 2, pp. 237-242,1995 https://doi.org/10.1016/0005-1098(94)00063-O
  11. K. S. Lee and T. G. Park, 'A fault diagnostic observer design by hybrid disturbance decoupling approach,' Trans. of KIEE, vol. 46, no. 11, pp. 1647-1652,1997
  12. C. Tsui, 'A new algorithm for the design of multi-functional observers,' IEEE Trans. Automatic Control, vol. 30, no. 3, pp. 89-93, 1985 https://doi.org/10.1109/TAC.1985.1103795
  13. R. Patton, P. M. Frank and R. N. Clark, Fault Diagnosis in Dynamic Systems, Theory and Application, Prentice-Hall, 1989
  14. J. Chen and R. Patton, 'Fault estimation in linear dynamic systems,' IFAC 12th Triennial World Congress, Sydney, Australia. pp. 503-506,1993
  15. E. Shoemig and R. N. Clark, 'Robust instrument fault detection in the Boeing commercial jetfoil using unknown input detection filters,' Mathematical and Intelligent models in simulation, edited by R. Hans, P. KooI, S. Tzafestas, J. C. Balzer, AG Scientific Pub., IMACS, pp. 463-470, 1991
  16. R. Seliger and P. M. Frank, 'Robust residual evaluation by threshold selection and a performance index for nonlinear observer based fault diagnosis,' Proc. of the International Conf. on Fault Diagnosis, Toulouse, 1993