• 제목/요약/키워드: Objective 1.2 region

검색결과 452건 처리시간 0.031초

게이트심장혈액풀 스캔에서 자동 관심영역 설정과 수동 관심영역 설정 모드의 비교 분석에 관한 고찰 (Study the Analysis of Comparison with AROI and MROI Mode in Gated Cardiac Blood Pool Scan)

  • 김정열;강천구;김영재;박훈희;김재삼;이창호
    • 핵의학기술
    • /
    • 제12권3호
    • /
    • pp.222-228
    • /
    • 2008
  • 목적 : 게이트심장혈액풀 스캔의 각 단위 영상에서 심실내 방사능치를 측정하여 좌심실의 시간-방사능 곡선을 구하여 심박출계수를 구하고 있다. 이를 위하여 좌심실과 배후방사능 관심영역을 정해야 하는데 올바른 관심영역 설정은 심박출계수의 정확도와 밀접한 관련이 있다. 관찰자에 의한 수동 관심영역을 설정 시 시간이 많이 걸리고 많은 경험을 필요로 하며 주관적인 측면이 포함되어 관찰자간의 오차가 발생하는 이유로 대부분의 컴퓨터에는 자동 및 반자동으로 각 단위영상 내 좌심실 외형을 그릴 수 있는 방법이 있다. 본 연구에서는 자동 관심영역 설정과 수동 관심영역 설정에 따른 좌심실 심박출계수를 비교 분석하여 컴퓨터 자동 관심영역 설정 방법이 수동 관심영역 설정보다 객관적이고 재현성이 높은 방법으로 이용될 수 있는지를 알아보고자 하였다. 실험재료 및 방법 : 항암화학요법 치료 대상 환자 33명을 대상으로 PHILIPS사의 ADAC laboratories, Argus Single head Gamma Camera를 이용하여 영상을 획득하였으며, 사용된 방사성 의약품은 체내 표지법을 이용하여 $^{99m}Tc$-RBC를 사용하였다. 영상획득 조건은 다중 게이트 획득 방식으로 매 R-R간격마다 서로 상응하는 단위 영상을 600초 동안 계수치를 얻어 24개의 단위영상을 획득하였다. 앙와위 자세에서 좌전사위 30~45도, 10~20도의 미측경사(caudal tilt) 조건으로 영상 획득 한 후 방사선사 3명이 각각 1회씩 컴퓨터 자동관심영역 설정 모드와 수동 관심영역 설정 모드를 이용하여 좌심실의 심박출계수를 구하여 비교 분석하였다. 결과 : 컴퓨터 자동 관심영역 설정과 수동 관심영역 설정 방법에서의 좌심실 심박출계수 평균은 각각 $65.8{\pm}5.9%$$71.4{\pm}12.4%$였다. 두 평균 간의 차이는 $5.5{\pm}9.9%$로 두 관심영역 설정 방법 간의 유의한 차이가 있었다(p=0.003). 또한 관찰자간의 신뢰도 검정에서는 수동 관심영역 설정 방법으로 분석하였을 때 보다 자동 관심영역 설정 방법이 관찰자간 일관성이 높은 것으로 나타났다($\gamma^{MROI}=0.793$, Cronbach's $\alpha$ $M^{ROI}=0.911$ Vs $\gamma^{AROI}=0.964$, Cronbach's $\alpha^{AROI}=0.986$). 영상분류에 따른 분석에서는 최적 중격상에서 두 관심영역 방법에 따른 좌심실 심박출계수는 통계적으로 유의한 차이를 보이지 않았으며(${\Delta}LVEF^{BSV}=0.7{\pm}2.3%$, p=0.233), 좌심실 분리가 잘 안 된 영상에서는 좌심실 심박출계수가 자동 관심영역 설정방법에서 더 높게 나타나는 차이를 보였다(${\Delta}LVEF=10.9{\pm}11.4%$, p=0.001). 또한 신뢰도 검정에서는 두 관심영역 설정 방법 모두 좌심실 분리가 잘 안 된 영상보다 최적 중격상에서 일관성이 높게 나타났다(수동 관심영역 설정 방법 $\gamma^{BSV}=0.836$, Cronbach's $\alpha^{BSV}=0.936$ Vs $\gamma=0.748$, Cronbach's $\alpha=0.888$ / 자동 관심영역 설정 방법 $\gamma^{BSV}=0.939$, Cronbach's $\alpha^{BSV}=0.978$ Vs $\gamma=0.948$, Cronbach's $\alpha=0.981$). 결론 : 최적 중격상을 획득하여 분석한다면 수동과 자동 관심영역 설정 방법 따른 좌심실 심박출계수가 큰 차이가 없는 것으로 나타났다. 또한 수동과 자동 관심영역 설정 방법에 대한 일관성을 비교하였을 때 자동 관심영역 설정 방법에서 높은 일관성을 나타냈다. 결국 영상획득 시 좌심실 최적 중격상의 좌전 사위상을 획득하여 관심영역을 설정한다면 수동 관심영역 설정 방법보다 자동 관심영역 설정 방법이 객관적이고, 재현성이 높은 방법으로 이용될 수 있을 것으로 사료된다.

  • PDF

씨름의 국가무형문화재 전승방향 및 과제 (The Transmission Direction and Tasks of Ssireum as a National Intangible Cultural Heritage)

  • 곽낙현
    • 동양고전연구
    • /
    • 제67호
    • /
    • pp.203-236
    • /
    • 2017
  • 이 연구의 목적은 씨름의 전승방향과 과제를 제시하는 것이다. 이에 대한 결론은 다음과 같다. 첫째, 씨름은 2016년 12월 국가무형문화재 제131호로 지정되었다. 둘째, 씨름의 보존과 보급현황에 있어서 씨름 전승과 관련된 전문인력 양성, 씨름전수시설, 씨름전수 프로그램, 씨름 전승을 위한 행 재정 등 씨름전승 관련 제도가 존재하지 않는 것으로 파악되었다. 셋째, "무형문화재 보전 및 진흥에 관한 법률"을 토대로 씨름의 전승방향을 제시하였다. (1)씨름의 전수교육대학 지정이 필요하다. (2)씨름교육과정이 신설되어야 한다. (3)씨름전수 교육생의 확보가 필요하다. (4)씨름전수를 위한 교재 제작이 필요하다. (5)씨름전수를 위한 지역별 지정 연수원 및 교수 요원의 확보가 필요하다. (6)씨름의 올바른 전승을 위한 조사방향이 설정되어야 한다. 넷째, "씨름 진흥법"을 토대로 씨름의 전승방향을 제시하였다. (1)씨름 진흥을 위한 법조문의 보완이 시급하다. (2)씨름의 전승을 위해서는 남북이 씨름에 대한 학술 및 문화재 정책 교류를 통해 획일화된 관점의 씨름의 국가무형문화재 전승방향보다는 남북한이 함께 공유하고 체계화 할 수 있는 씨름 조사 및 기록화, 씨름 원형 발굴을 위한 콘텐츠 개발 및 보급, 씨름의 보존 및 진흥을 위한 전수체계의 기반 구축 등을 위한 공동의 전승방향이 모색되어야 한다. 아울러 씨름의 교육, 전승 및 전문인력 육성 사항, 씨름의 조사, 기록 및 정보화에 대한 전반적인 기초 토대 전승 방안이 마련되어야 한다. 다섯째, 씨름의 정책과제에 대한 내용이다. (1)씨름의 국내외 진흥을 위한 "씨름 진흥법"의 법제도적 보완이 마련되어야 한다. (2)씨름 단체의 통합을 위한 행정체계 단일화 작업이 이루어져야 한다. (3)씨름의 표준기술체계 매뉴얼 제작이 이루어져야 한다. (4)씨름의 보존 및 체계적인 전수를 위해서는 '씨름전수관'을 건축해야 한다. (5)씨름전수교육대학의 선정 및 씨름전수자 양성 시스템 구축이 이루어져야 한다. (6)씨름 전승에 필수적인 씨름 기술 활용을 위한 데이터베이스(DB) 구축이 필요하다.

백색 및 청색 방풍망 차광 처리가 '후지', '홍로' 사과 과실의 품질에 미치는 영향 (Effect of White and Blue Wind Net Shading on the Quality of 'Fuji' and 'Hongro' Apple Fruits)

  • 강경진;서정학;윤홍기;서정석;주정일;천종필
    • 생물환경조절학회지
    • /
    • 제29권2호
    • /
    • pp.120-129
    • /
    • 2020
  • 본 연구는 '후지/M.9'와 '홍로/M.9'가 재식된 사과원에 바람이나 우박을 막기 위해 사용되는 망(구멍크기 : 2×2mm)을 수관상부에 색상별로 백색과 청색을 나누어 설치한 후 햇빛의 차광정도 및 생육환경 차이 등에 따른 과실품질 변화를 조사하였다. '후지' 사과의 경우 대기온도 34.8℃인 오후 2~3시경의 과실표면 온도를 측정한 결과, 무처리는 40.0℃로 가장 높았고, 청색 방풍망과 백색 방풍망 처리구는 각각 34.9℃, 36.6℃로 크게 낮았다. '홍로'에서는 무처리구가 44.2℃일 때, 청색 방풍망 처리구는 38.3℃, 백색 방풍망 처리구는 38.5℃를 기록하여 '후지'와 마찬가지로 온도 경감효과를 보였다. '후지'의 과피색차를 조사한 결과, 과피적색도(a)는 무처리구가 16.5, 청색 방풍망 처리구는 18.0였으나, 백색 방풍망 처리구는 19.3으로 가장 높은 값을 보였다. '홍로'에서도 백색 방풍망 처리구가 적색도가 34.9로 무처리구 28.1에 비해 유의하게 높은 적색도 발현을 보였다. 일소피해 조사결과, '후지'에서 청색 방풍망 처리구 3.8%, 백색 방풍망 처리구 4.2%로 무처리구 9.4%에 비하여 크게 경감되었고, '홍로'의 경우는 청색 방풍망 처리구는 8.8%, 백색 방풍망 처리구는 12.4%로 무처리구 28.8%에 비하여 일소발생이 현저히 감소하였다. 이 같은 결과는 처리별 자외선 수치를 측정하였을 때 무처리 구간의 자외선 값에 비해 청색 방풍망 처리구에서 유의하게 낮아 방풍망 처리에 의한 자외선 차단 효과에 의한 것을 확인할 수 있었다.

ADHD아동의 감각자극에 대한 생리학적 반응 특성과 행동학적 특성: 체계적 고찰 (The Physiological Responses and Behavior Characteristics of Sensory Stimulation of ADHD Children: A Systematic Review)

  • 이나핼;김경미
    • 대한감각통합치료학회지
    • /
    • 제9권2호
    • /
    • pp.51-60
    • /
    • 2011
  • 목적 : ADHD아동의 감각자극에 대한 생리학적 반응특성은 감각자극의 종류, 측정도구, 그리고 반응으로 알아보고, 행동학적 특성은 측정도구, 빈도, 측정도구별로 공통된 문제 항목을 분석하여 ADHD아동의 감각자극에 대한 특성을 알아보고자 하였다. 연구방법 : 체계적 고찰방법을 사용하였다. 1990년 1월부터 2011년 12월 31일까지 학회지에 게재된 논문을 Riss4U, MEDLINE/PubMed, CINAH을 통해 검색하였다. 주요 검색어는 "ADHD, Children, Sensory processing, sensory integration, SP, SSP, SOR, TIE, CSP, SEP, EDR"으로 하였으며, 최종적으로 15개의 논문을 분석하였다. 결과 : 1. ADHD아동을 대상으로 감각자극에 대한 생리학적 반응에 관한 연구는 5개(33.33%)이고, 행동학적 반응에 관한 연구는 10개(66.67%)이며, 두 가지를 병행한 연구는 2개(13.33%)로 전체 15개(100%)논문을 분석하였다. 2. 생리학적 반응에 관한 연구 5개 중, 촉각과 고유 감각 자극을 사용한 연구는 3개, 후각, 청각, 시각, 촉각, 전정감각을 모두 사용한 연구는 2개였다. 3. 행동학적 특성에 관한 연구 10 중, SP는 5개, SSP는 3개, SOR은 2개, TIE는 1개, CSP는 1개이다. 4. ADHD아동의 감각자극에 대한 생리학적 반응특성은 일차감각피질의 손 영역에 있는 신경원세포의 활동전위에서 큰 반응을 보였다. 반응 시 초기에 큰 반응을 보였고 뒤로 갈수록 빠른 습관화를 보이는 것으로 나타났고, 회복 시에 많은 비 특이적 반응을 보였다. 5. 행동학적 반응특성은 부주의/산만, 전정감각처리, 지구력/근 긴장도 조절, 감정반응에 대한 감각입력 조절, 활력이 부족하고 허약함을 보이는 특성이 있었다. 결론 : ADHD아동의 감각자극에 대한 생리학적 반응 특성과 행동학적 특성을 아는 것은 ADHD아동의 감각조절 문제를 이해하는데 중요한 근거가 된다.

  • PDF

유한요소법을 이용한 치과용 고정체와 치조골에서의 응력분포에 대한 생체 역학적 분석 (A Biomechanical Analysis or the Stress Distribution of Dental Implant and Alveolar Bone Utilizing Finite Element Method)

  • 정지광;신정욱;이성재;김영곤;김정성;박정홍
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1997년도 추계학술대회
    • /
    • pp.511-514
    • /
    • 1997
  • The objective of this study is to propose a finite element based design of the dental implant replacing unction and shape of natural teeth. For this, geometric actors were varied to investigate stress distribution of the alveolar bone around dental implant. In this study, the results were obtained based on the theory of linear elastic, with geometrically axisymmetric assumption. Geometric actors determining implant shape are ranged as 0.2mm-0.6mm, 0.04mm-0.1mm, 0.46mm-0.84mm or height of thread, radius of curvature of thread, and pitch, respectively. The stresses in the alveolar bone caused by biting force playa major role in determining implant stability. Especially, the stress concentration in the cortical bone causes bone resorption and finally makes the implant unstable. Therefore, the stress distributions were investigated on the side of the alveolar bone focusing on the area of cortical bone. The maximum von Mises stress was found to increase up to 6% as the height of thread increases, while its value was to decrease to 19% when the radius of curvature increase within the assigned ranges. For the variation of pitch, the larger size of pitch results in greater maximum von Mises stress when the length of the implant under consideration is fixed. The existence of the neck below the shoulder did not affect the stress distribution in the region of alveolar bone. However, the stresses on the side of the implant near the neck were found to be different by 20% approximately. Therefore, the neck can provide the stability of the implant against continuing biting movement. As a conclusion, the finite element based study shows a potential in designing the dental implant systematically.

  • PDF

섬유강화형 복합레진브릿지의 파절강도 및 변연적합도에 관한 연구 (A COMPARATIVE STUDY ON THE FRACTURE STRENGTH AND MARGINAL FITNESS OF FIBER-REINFORCED COMPOSITE BRIDGE)

  • 최호근;신상완;임호남;서규원
    • 대한치과보철학회지
    • /
    • 제39권5호
    • /
    • pp.526-546
    • /
    • 2001
  • Fiber-reinforced composite(FRC) was developed as a structural component for dental appliances such as prosthodontic framework. FRC provides the potential for fabrication of a metal-free, excellent esthetic prostheses. It has demonstrated success as a result of its simple fabrication, natural colour, and marginal integrity, and fracture resistance of veneering composite resin and the FRC material. Although it has lots of merits, clinical and objective data are insufficient. The purpose of this study was to evaluate the fracture strength and the marginal fitness of fiber reinforced composite bridge in the posterior region for clinical application. Sixteen bridges of each group. $Targis/Vectris^{(R)}$, $Sculpture-Fibrekor^{(R)}$, and In-Ceram, were fabricated. All specimens were cemented with Panavia 21 to the master dies. Strength evaluation was accomplished by a universal testing machine (Instron). The marginal fitness was measured by using the stereoscope (${\times}50$). The results were as follows. : 1. The fracture strength according to the materials was significantly decreased in order In-Ceram($238.81{\pm}82$), Targis Vectris($176.25{\pm}18.93$), Sculpture-Fibrekor($120.35{\pm}20.08$) bridges. 2. FRC resin bridges were not completely fractured, while In-Ceram bridges were completely fractured in the pontic joint. 3. The marginal accuracy was significantly decreased in order Targis/Vectris ($60.71{\mu}m$), Sculpture-Fibrekor($73.10{\mu}m$) In-ceram Bridge ($83.81{\mu}m$). 4. The fitness of occlusal sites had a lower value than the marginal sites(P<0.001), and the marginal gaps of inner site of the pontic were greater than that of outer sites of the pontic. Fiber reinforced composite bridges are new, esthetic prosthesis and can be clinically used in anterior regions and short span bridges. However, caution must be exercised when extrapolating laboratory data to the clinical situation because there are no long term clinical data regarding the overall success of the FRC.

  • PDF

여대생의 결혼관 및 결혼의향에 영향을 미치는 요인: 경기지역 일부 여대생을 중심으로 (Factors Affecting the View of marriage and Intention to marriage of Female University Students)

  • 소미현;강현숙
    • 한국학교ㆍ지역보건교육학회지
    • /
    • 제22권2호
    • /
    • pp.53-64
    • /
    • 2021
  • Objectives: The objective of this study is to understand the factors having effects on the view of marriage of female university students, and also to present the reference data for establishing the measures for having the positive view of marriage of female university students. Methods: An online survey was conducted targeting total 254 female university students of two universities in Gyeonggi region, from October 1 st to November 13th 2020. The results of this study are as follows. Results: First, to the question related to the intent to marry, total 70% of them responded that they had intent to marry. In the time of marriage, they said they would marry when getting financially stable. The 30% of subjects said that they would choose non-marriage because they wanted to continuously enjoy free life and they did not want to bear burden related to childbirth and child-rearing. Second, in the results of analyzing differences in the view of marriage according to the general characteristics, the students with intent to marry showed the higher romantic view of marriage, instrumental view of marriage, and exclusive view of marriage than the students without intent to marry, which showed significant differences. Third, the view of marriage were the factors having the greatest effects on the intent to marry of female university students. Conclusion: Based on such results of this study, it would be necessary to focus on the policies that could positively change the view of marriage of female university students. It would be needed to establish the social·institutional support measures for work-life balance by reducing women's burden of childbirth and child-rearing. To the question about the time of marriage, the most subjects responded that they would do so when the economic ability and stable job were equipped. Thus, there should be the systematic youth employment support system that could help the students to quickly and stably enter society and to become financially independent after graduation. Also, for the formation of positive family relation, it would be necessary to develop·operate the educational programs for forming positive family relation and desirable communication methods for each subject(spouse, parents, children, siblings, and etc.).

하지 정맥조영술 MDCT에서 고정 관전류 기법과 Z-축 자동 관전류 변동 제어에 의한 선량 비교 (Comparison Radiation Dose of Z-Axis Automatic Tube Current Modulation Technique with Fixed Tube Current Multi-Detector Row CT Scanning of Lower Extremity Venography)

  • 유병규;이종석;장근조;전상환;김용수;권대철
    • Journal of Radiation Protection and Research
    • /
    • 제32권3호
    • /
    • pp.123-133
    • /
    • 2007
  • 하지 정맥류 질환 환자를 대상으로 하지 정맥조영술 MDCT 검사에서 환자의 피폭선량을 최소화 하면서 최적의 진단영상을 묘출하기 위해 고정 관전류 기법과 Z-축 자동 관전류 변동 제어를 이용하여 CTDIvol(CT dose index volume), DLP(dose length product) 산출을 통한 영상의 노이즈를 측정하여 비교하였다. Monte Carlo simulation으로 200, 250, 300 mA에서 CTDIw, CTDIvol, DLP를 계산하여 고정 관전류 기법과 비교하였다. 고정 관전류 기법의 대상 환자는 50명(평균 나이, 46세; 연령 범위, 35-61세)으로 남성30명, 여성 20명 이었고, 평균 체중은 62.4 kg 이었다. Z-축 자동 관전류 변동 제어 대상 환자는 50명(평균 나이, 43세; 범위, 37-63세)으로 남성25명, 여성 25명 이었고 평균 체중은 60.1 kg 이었다. 고정 관전류 기법은 200, 250, 300 mA를 기준으로 하고, Z-축 자동 관전류 변동 제어는 노이즈 지수 10, 11, 12 HU에서 관전류 $70{\sim}450\;mA$ 범위 내에서 자동으로 선택하였다. 고정 관전류 기법과 Monte Carlo simulation 비교에서 200 mA에서의 CTDIvol은 차이가 없었으나, 250 mA, 300 mA 에서의 Monte Carlo simulation는 높았고, DLP는 모든 관전류에서 Monte Carlo simulation이 높게 측정 되었다. 노이즈는 고정 관전류에서 최소 $9.8{\pm}0.9\;HU$, 최대 $12.5{\pm}0.7\;HU$ 이었고, Z-축 자동 관전류 변동 제어에서는 최소 $11.3{\pm}0.8\;HU$, 최대 $12.9{\pm}0.7\;HU$이었다. Z-축 자동 관전류 변동 제어에서 노이즈 지수가 증가하면 CTDIvol과 DLP가 감소하였으나 노이즈는 증가하였다. 생식부위를 포함하는 하지 정맥조영술에서 Z-축 자동 관전류 변동 제어 방법이 고정 관전류 기법에 비해 선량을 감소하는 효과가 있었다.

일반 가구의 가습기살균제 노출 특성 및 건강이상 경험과의 연관성 (Characteristics of Exposure to Humidifier Disinfectants and Their Association with the Presence of a Person Who Experienced Adverse Health Effects in General Households in Korea)

  • 이은선;정해관;백도명;김솔휘;임종한;김판기;이경무
    • 한국환경보건학회지
    • /
    • 제46권3호
    • /
    • pp.285-296
    • /
    • 2020
  • Objective: The objective of this study was to describe the characteristics of exposure to humidifier disinfectants (HDs) and their association with the presence of a person who experienced the adverse health effects in general households in Korea. Methods: During the month of December 2016, a nationwide online survey was conducted on adults over 20 years of age who had experience of using HDs. It provided information on exposure characteristics and the experience of health effects. The final survey respondents consisted of 1,555 people who provided information on themselves and their household members during the use of HD. Exposure characteristics at the household level included average days of HD use per week, average hours of HD use per day, the duration within which one bottle of HD was emptied, average input frequency of HD, amount of HD (cc) per one time used, and active ingredients of HD products (PHMG, CMIT/MIT, PGH, or others). The risk of the presence of a person who experienced adverse health effects in the household was evaluated by estimating odds ratios (ORs) and 95% confidence intervals (CIs) adjusted for monthly income and region using a multiple logistic regression model. Subgroup analyses were conducted for households with a child (≤7 years) and households with a newborn infant during HD use. Results: The level of exposure to HD tended to be higher for households with a child or newborn infant for several variables including average days of HD use per week (P<0.0001) and average hours of HD use per day (P<0.0001). The proportion of households in which there was at least one person who experienced adverse health effects such as rhinitis, asthma, pneumonia, atopy/skin disease, etc. was 20.6% for all households, 25.3% for households with children, and 29.9% for households with newborn infants. The presence of a person who experienced adverse health effects in the household was significantly associated with average hours of HD use per day (Ptrend<0.001), duration within which one bottle of HD was emptied (Ptrend<0.001), average input frequency of HD (Ptrend<0.001), amount of HD per one use (Ptrend=0.01), and use of HDs containing PHMG (OR=2.23, 95% CI=1.45-3.43). Similar results were observed in subgroup analyses. Conclusion: Our results suggest that level of exposure to HD tended to be higher for households with a child or newborn infant and that exposure to HD is significantly associated with the presence of a person who experienced adverse health effects in the household.

$^{99m}Tc$ 표지화합물을 사용한 심근 관류 SPECT 검사에서 심장과 타 장기와의 중첩 방지를 위한 자세 변화의 유용성 (Usefulness of Posture Change to Prevent Overlapping of Heart and Other Organs in Myocardial Perfusion SPECT using $^{99m}Tc$ Labeled Compound)

  • 이동혁;오신현;정석;조석원;남궁혁;김재삼;이창호
    • 핵의학기술
    • /
    • 제16권1호
    • /
    • pp.62-69
    • /
    • 2012
  • 게이트 심근 관류 SPECT는 심근관류를 평가하고 관상동맥질환을 진단하는 비침습적인 방법으로 매우 가치가 있는 검사이다. $^{99m}Tc$를 이용한 표지화합물들은 특성상 간과 담낭에 많이 농축이 되며 장으로 배설이 된다. 본 연구에서는 소화기관을 통해 배출되는 방사성의약품의 일부가 장기 내에 남아 심장의 음영을 침범하는 경우 자세의 변화를 통해 영상의 획득 방법을 변형하여 효과적으로 분리 관찰할 수 있도록 하는데 그 목적을 두었다. 2011년 1월부터 8월 사이에 심장과 심혈관계 질환이 의심되거나 이에 따른 시술 및 수술을 받은 20명의 환자들을 대상으로 시행하였다. 대상 군에 대하여 $^{99m}Tc$-sestamibi 또는 $^{99m}Tc$-tetrofosmin 370 MBq (10 mCi)을 정맥 주사하였다. 주사 30분 후에 지방식을 하도록 하였으며, 약 1시간 후에 검사를 시행하였다. 기본적인 검사는 앙와위 자세에서 양팔을 머리 위로 거상한 자세로 하였다. 휴식기 검사가 종료되면 약 3~4시간 후에 아데노신에 의한 약물부하를 시행하였다. 부하는 6분간 실시 하였으며, 아데노신이 주입되기 시작한지 4분째에 다시 한번 방사성의약품을 주사하였다. 부하기 때의 방사성 의약품은 1,110 MBq (30 mCi)을 주사 하였으며, 지방식 및 검사 시간은 휴식기 때와 동일하게 하였다. 휴식기와 부하기 검사에서 심장과 장기의 중첩이 발생한 경우에는 곧바로 앙와위 자세에서 고정 용구를 사용하여 상체를 거상시켜 환자 자세를 변화시키고 그 이외의 다른 조건들은 동일하게 하여 영상을 다시 한번 획득하였다. 기존의 앙와위 자세에서는 횡격막 이하 장기의 일부가 심장과 중첩이 일어났으나 고정 용구를 사용한 환자 자세의 변화로 심장과 중첩되었던 타 장기들의 대부분이 신체의 아래쪽으로 내려가 심장과 충분히 분리되는 모습을 육안적으로 관찰할 수 있었다. 장기의 일부가 심장에 중첩된 경우에 비해 분리된 경우의 재구성 영상에서 각각 전체 평균의 차이는 확장기말 용적이 2.75 mL 증가, 수축기말 용적은 3.16 mL 감소, 심박출 계수는 3.58% 증가하였고, 결손 부위의 면적은 부하기에서 $3.58cm^2$ 감소, 휴식기에서 $3.92cm^2$ 감소하였다. 또한 각각의 수치들을 토대로 시행한 대응표본 $t$-검정에서는 $p$>0.05로 유의한 차이는 없었다. 본 연구에서는 심근 관류 SPECT에서 심장과 타 장기와의 중첩된 부분을 고정 용구를 사용함으로써 효과적으로 분리시켜 영상화할 수 있었다. 이와 같이 지연 검사가 필요한 경우 적절한 고정 용구를 사용하게 된다면 보다 더 효율적인 검사가 이루어질 수 있을 것이라 사료된다.

  • PDF