• 대한기계학회논문집B
• /
• 제32권8호
• /
• pp.589-596
• /
• 2008

An orifice type of aerodynamic lens is generally used to focus nanoparticles. However, it is impossible to focus particles smaller than 10nm in air due to flow instability of fluid in a lens. In this study, we propose a new converging-diverging type of the aerodynamic lens capable of focusing particles of 5-50nm in air. Designing factors of the lens configurations is also extracted and explained in detail through a numerical simulation. It was demonstrated that the aerosols are delivered from the entrance to the downstream of the lens system with 90% transmission efficiency. The final beam diameters are shown to be more or less 1mm in the range of particle size.

• 설비공학논문집
• /
• 제13권12호
• /
• pp.1255-1265
• /
• 2001

A numerical study has been conducted to characterize the transient flow in a utility gas turbine burning natural gas. The solution domain encompasses the supply gas pressure regulator to the combustor of the gas turbine that employs multi-nozzle fuel injectors. Some results produced for verification in the present study agree suite well with the experimental ones. It is found that the total gas flow may decrease noticeably during its combustion mode change, which would be the reason of momentary combustion upset, when a reference case of opening ratios of control valves in the system is applied. Several parameters are then varied in order to make the total gas flow stable over that period of time. Results of this study may be useful to understand the unsteady behavior of combustion system burning natural gas.

• 한국측량학회지
• /
• 제20권2호
• /
• pp.155-164
• /
• 2002

본 연구에서는 상업용 고해상도 위성인 IKONOS 위성 영상의 기하보정 방법에 대해 알아보기 위해 기존에 쓰여왔던 다항식모델과 위성의 보조데이터 없이 기하보정이 가능한 RM을 적용하여 각각의 차수와 기준점의 수에 따른 정확도를 비교 분석하였다. 또한 RFM 계수산출을 위한 최소제곱법의 수치적 불안정성을 극복하기 위하여 Tikhonov 정규화기법을 도입하여 적용하였다. RFM 적응 결과, 기존의 2차원 다항식 모델에 비해 평균제곱근오차를 2 pixel 이상 감소시킬 수 있었다.

• 천문학회보
• /
• 제36권1호
• /
• pp.56.1-56.1
• /
• 2011

To understand the effect of the initial rotation for tidally bounded clusters with mass spectrum, we performed N-body simulations for the clusters with different degrees of initial rotation and compared to Fokker-Planck results. We confirmed that the cluster evolution is accelerated by the initial rotation as well as the mass spectrum. For the slowly rotating models, the time evolution of mass, energy and angular momentum show good agreements between N-body and Fokker-Planck calculations. On the other hand, for the rapidly rotating models, there are significant differences between two approaches at the beginning of the evolution. By investigating cluster shapes, we concluded that these differences are mainly due to secular instability that takes place for very rapidly rotating clusters. The shape of cluster for N-body simulations becomes tri-axial or even prolate, while the 2-dimensional Fokker-Planck simulation can treat only oblate type axisymmetric systems. We also founded that there is the angular momentum exchange from high mass to low mass.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.63-66
• /
• 2008

The bridge deck section composed of a concrete slab resting on two I-beam girders are known to be susceptible to flutter instability and vortex shedding. Moreover, the cable stayed bridge in construction is more vulnerable to wind rather than in service when the free cantilever construction method is applied. This paper describes the effect of the dynamic wind loads on the bridge during construction and the effect of alternative temporary stabilizing measures. Therefore, a series of wind tunnel tests and numerical analysis were carried out to determine if any countermeasures were required.

• 한국농공학회지
• /
• 제36권3호
• /
• pp.144-154
• /
• 1994

An efficient tidal model, TIDE which is an iterative type, nonlinear finite element model has developed for the analysis of the tidal movement in the coastal area which is characterized by irregular boundaries and bottom topography. Traditional time domain finite element models have been in difficulties with requirement for high eddy viscosity coefficients and small time steps to insure numerical instability. These problems are overcome by operating in the frequency domain with an elaborate grid system by combining the triangular and quadrilateral shape grids. Furthermore, in order to handle non-linearity which will be more significant in the shallow region, an iterative scheme with least square error minimization algorithm has been implemented in the model. The results of TIDE model are agreed with the analytical solutions in a rectangular channel under the condition of tidal waves entering the channel closed at one end.

• Nuclear Engineering and Technology
• /
• 제38권7호
• /
• pp.657-664
• /
• 2006

The problem of reactivity oscillations for a point reactor constitutes an interesting aspect of nuclear reactor physics and its solution may give important information for dynamic and safety assessments. The present paper considers the problem of a reactivity oscillation for a source-driven system which involves some specific aspects that introduce significant differences with respect to the source-free situation. Assuming a square-wave shape for the reactivity insertion, the solution is derived by a fully analytical approach. The conditions for stability and instability can be identified in a straightforward way by directly studying the stationarity of the power response. Numerical results presented allow to discuss the role of the system kinetic parameters and of the time-shape of the reactivity wave.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.620-625
• /
• 1995

Finite element analysis tool was developed to analyze the casting process. Generally, casting processes consists of mold filling and solifification. In order to investigate the effects of process variables and to predict the defects, both filling and solidiffication process were simulated simultaneously. At filling process, especiallywe consider thermal coupling to investigate thermal history of material during the filling stage. And thermal condition at the final stage of filling is used as the initial conditions in a solidification process for the exact simulation of the actual casting processes. At mold filling process, Lagrangian-type finite element method with automatic remashing scheme was used to find the material flow. To avoid numerical instability in low viscous fluid, a perturbation method with artificial viscosity is adopted. At solififfication process, enthalpy-based finite element method was used to solve the heat transfer problem with phase change. And elastic stress analysis has been performed to predict the thermal residual stress. Through the FE analysis, solidiffication time, position of solidus line, liquidus line and thermal residual stress are studied. Finite element tools developed in this study will be used process design of casting process and maybe basic structure for total CAE system of castigs which will be constructed afterward.

• 소음진동
• /
• 제2권4호
• /
• pp.265-272
• /
• 1992

The simplest method which has been used extensively for vibration analysis is the transfer matrix method introduced by Myklestad and was later extended by many researchers. The crude approximation results in considerable error on the predicted natural frequencies and to increase the accuracy the number of elements used in the analysis must be increased. In addition, numerical instability can occur as a result of matrix multiplication. Also the main disadvantage of the finite element method is the large computer memory requirements for complex systems. The new method proposed in this paper combines the transfer matrix and finite dynamic element techniques to form a powerful algorithm for vibration analysis of rotor system. It is shown that the accuracy improves significantly when the transfer matrix for each segment is obtained from finite dynamic element techniques.

• 한국소음진동공학회논문집
• /
• 제12권11호
• /
• pp.890-896
• /
• 2002

This paper deals with the dynamic stability of a brake shoe under pulsating frictional forces. A lining part of brake systems is assumed as a distributed spring, and the supported elements of a shoe are assumed as translational springs for a constant distributed frictional force and a pulsating frictional force. Governing equations are derived by the use of the extended Hamilton's principle, and numerical results are calculated by finite element method. The critical distributed frictional force and instability regions were investigated for the change of distributed spring constants and translational spring constants.