• Journal of Life Science
• /
• v.18 no.4
• /
• pp.447-453
• /
• 2008

Zinc is an essential trace element in Human Being. Highly zinc containing yeast strain isolated from the tropical fruit, rambutan and the zinc concentration in this yeast strain was 306 ppm (30.6 mg%)per dry matter basis. This strain was found to be a rounded type, normal size, and multi-polar budding. Phylogenetic analysis using the ITS1-5.85 rDNA sequences from isolated strain is most similar to yeast Saccharomyces cerevisiae at the level of nucleotide sequence identity at 99%. This strain was produced alcohol by about 12% using fully colonized koji-rice with Aspergillus oryzae. In conclusion, the isolated strain was found to be closely related to the S. cerevisiae based on its morphological and physiological properties, and alcohol fermentation. The phylogenetic analysis of strain FF-10 using ITS 5.8S rDNA sequence data also supported the closely related to the S. cerevisiae. Accordingly, the isolated yeast was named as S. cerevisiae FF-10. Further studies on the best culture conditions for zinc production from zinc-enriched S. cerevisiae FF-10 are under investigation.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.12
• /
• pp.35-44
• /
• 2013

In this study, a particle method without using grid was applied for analysing large deformation problems in soil flows instead of using ordinary finite element or finite difference methods. In the particle method, a continuum equation was discretized by various particle interaction models corresponding to differential operators such as gradient, divergence, and Laplacian. Soil behavior changes from solid to liquid state with increasing water content or external load. The Mohr-Coulomb failure criterion was incorporated into the particle method to analyze such three-dimensional soil behavior. The yielding and hardening behavior of soil before failure was analyzed by treating soil as a viscous liquid. First of all, a sand column test without confining pressure and strength was carried out and then a self-standing clay column test with cohesion was carried out. Large deformation from such column tests due to soil yielding or failure was used for verifying the developed particle method. The developed particle method was able to simulate the three-dimensional plastic deformation of soils due to yielding before failure and calculate the variation of normal and shear stresses both in sand and clay columns.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.271-278
• /
• 2019

The corrosion of reinforcements embedded in concrete causes severe deterioration in reinforced concrete structures. As a countermeasure, epoxy coated reinforcements are used to prevent corrosion of reinforcements. When epoxy coated bars are used, the resistance of corrosion is excellent, but epoxy coating on the bars have a disadvantage of reduction in bond capacity comparing to that of normal bars. Therefore, it is necessary to confirm the bond performance of epoxy coated reinforcements through experimental and analytical methods. Bond behaviors of epoxy coated bars for various diameters of 13 and 19mm and thicknesses of cover concrete of 3 types(ratio of cover to bar diameter) are examined. As the diameters of the epoxy coated bars increase, the difference of bond strength between epoxy coated and uncoated bars also increases and damage patterns showed pull out failure. In addition, finite element analysis was performed based on the bond-slip relationship obtained by direct pullout test and compared with the flexural test results. It is considered that flexural member test is more useful than pullout test for simulating the behavior of actual structure.

• Journal of the Korean Society for Railway
• /
• v.16 no.3
• /
• pp.207-216
• /
• 2013

The components of concrete track (rail and rail fastening system) in railway bridge deck ends are damaged and deteriorated by track-bridge interaction forces such as uplift forces and compression forces owing to their structural flexural characteristics (bridge end rotation). This had led to demand for alternatives to improve structural safety and serviceability. In this study, the authors aim to develop a transition track to enhance the long term workability and durability of concrete track components in railway bridge deck ends and thereby improve the performance of concrete track. A time-history analysis and a three-dimensional finite element method analysis were performed to consider the train speed and the effect of multiple train loads and the results were compared with the performance requirements and German standard for transition track. Furthermore, two specimens, a normal concrete track and a transition track, were fabricated to evaluate the effects of application of the developed transition track, and static tests were conducted. From the results, the track-bridge interaction force acting on the track components (rail displacement, rail stress, and clip stress) of the railway bridge deck end were significantly reduced with use of the developed transition track compared with the non-transition track specimen.

• 한국노년학
• /
• v.38 no.1
• /
• pp.65-82
• /
• 2018

The purpose of this study is to statistically summarize the effect sizes using meta-analysis of various Kigong programs implemented on the subject of physical health of the elderly. Including 23 academic journal studies and 11 thesis studies reported domestically until 2016, a total of 34 studies were selected and analyzed to verify the effect sizes of programs, program types, measuring variables, and activity elements. The findings are as follows. First, it was found that the programs were midium effective with overall average effect size showing .748(p<.001). A program of Tai-Chi indicated the largest effect size of .836(p<.001). In terms of measuring variables, physical strength showed the largest effect size of .806(p<.001). In terms of gender by group, it was found that groups consisting only of men indicated the largest effect size of 2.388(p<.001). As for effect size by group of disease state, normal group with showed the highest effect size of .804(p<.001). Second, in activity elements, 31~60 by the group size has the largest effect size of .873(p<.001), total number of sessions for 31~40 sessions indicated the largest effect value of .829(p<.001). As for number of sessions per week, 5 sessions showed largest effect value of .918(p<.001), in terms of activity time, 50 minutes showed large effect value of 1.391(p<.001). As summarized above, Kigong programs are midium effective for physical health of the elderly, as an activity elements to consider when configuring the program, for group size 31~60, 31~40 sessions in total, 5 sessions per week and 50 minutes per sessions were recommended.

• The Korea Journal of Herbology
• /
• v.33 no.5
• /
• pp.89-103
• /
• 2018

Objectives : This study is aimed to compare the changes in Antioxidative capacity of Liriopis Tuber by steaming process and to compare the effects in hyperlipidemia induced rats fed high cholesterol diet between Simvastatin and Liriopis Tuber by steaming process. Methods : The SD rats were divided into six groups: normal diet (Nor), high cholesterol diet (Veh), high cholesterol diet plus Simvastatin 5 mg/kg (Sim), high cholesterol diet plus LT0 extract 200 mg/kg (LT0), high cholesterol diet plus LT6 extract 200 mg/kg (LT6) and high cholesterol diet plus LT9 extract 200 mg/kg (LT9). We compared the total cholesterol (TC), triglyceride (TG), high density lipoprotein cholesterol (HDL), low density lipoprotein cholesterol (LDL) contents and reactive oxygen species (ROS) from each serums. Protein expression in liver tissues related to antioxidant and cholesterol was analyzed. Results : The Antioxidant activity of Liriopis Tuber increased by steaming process. In vivo, TC, TG, LDL-c, atherogenic index (AI) and cardiac risk factor (CRF) decreased and HDL-c increased with increasing steaming frequency. aspartate aminotransferase (AST), alanine aminotransferase (ALT), creatinine, and blood urea nitrogen (BUN) decreased with increasing steaming frequency. ROS decreased only in LT9, and SOD, catalase and glutathione peroxidase (GPx) increased with increasing steaming frequency. phospho-AMP-activated protein kinase (p-AMPK) increased and sterol regulatory element-binding protein 2 (SREBP-2), Phospho-Acetyl-CoA Carboxylase (p-ACC) and HMG-CoA reductase (HMGCR) decreased with increasing steaming frequency. Liver staining showed a decrease in hepatic fat accumulation of LT9. LT9 showed significant results in all experiments. Conclusions : LT9 showed significance of anti-lipid effect and improved fatty liver of hyperlipemia induced rats fed on high cholesterol diet, In conclusion, LP9 can be effectively used for the treatment of hyperlipidemia.

• Journal of Nutrition and Health
• /
• v.55 no.1
• /
• pp.36-46
• /
• 2022

Purpose: Quercetin is a polyphenolic flavonoid abundant in many fruits and vegetables. It has potential health-beneficial properties, such as antioxidant, anti-obesity, anti-cancer, anti-diabetic and anti-inflammatory effects. The purpose of this study was to investigate whether the lipid metabolism improvement effect of quercetin affected the regulation of AMP-activated protein kinase (AMPK) activity and microRNA (miR)-21 expression in the liver of mice fed a high-cholesterol diet. Methods: Male C57BL/6J mice were fed with normal diet, quercetin-free diet and diets containing 0.05% or 0.1% quercetin for six weeks. Hypercholesterolemia was induced by adding 1% cholesterol and 0.5% cholic acid to all diets. Serum and liver triglyceride (TG), and total cholesterol (TC) concentrations were analyzed using a commercial enzymatic colorimetric kit. AMPK activity was quantified using an AMPK kinase assay kit. The levels of miR-21 and genes involved in lipid metabolism were measured by real-time quantitative polymerase chain reaction. Results: Supplementation of quercetin reduced serum and hepatic TG and TC levels without changing body weight and food intake. Dietary quercetin significantly inhibited the mRNA levels of hepatic sterol-regulatory element binding protein-1c, acetyl-CoA carboxylase 1 and fatty acid synthesis, which are involved in hepatic lipogenesis. Dietary quercetin enhanced AMPK activity and suppressed miR-21 expression, promoting hepatic lipid accumulation. Conclusion: These results suggest that the lipid-lowering effect of quercetin on the serum and liver of mice may be partially mediated by the regulation of lipogenic gene expression, AMPK activity and miR-21 expression in the liver of mice fed a high-cholesterol diet.

• Journal of Korean Medicine Rehabilitation
• /
• v.32 no.4
• /
• pp.1-8
• /
• 2022

Objectives This study is to investigate the effects and mechanisms of Gastrodia elata extract (GEE) on the high-fat diet-induced obesity model. Methods C57BL/6 mice were randomly assigned into 5 groups (n=10). Control group was fed normal diet (ND). Obesity group was fed 60% high fat diet (HFD). The other three groups were fed HFD with 100, 200, 500 mg/kg GEE. After five weeks, body weight, liver and epididymal fat weight, triglyceride concentration in liver and serum, sterol regulatory element-binding protein-1 (SREBP-1), acetyl-CoA carboxylase (ACC), fatty acid synthase, peroxisome proliferator-activated receptor 𝛾 (PPAR-𝛾), CCAAT/enhancer binding protein 𝛼 (C/EBP-𝛼) expression level, insulin concentration in serum were measured. Results The GEE (100, 200, and 500 mg/kg)-treated animals exhibited substantial decreases in body mass, liver weight and epididymal white adipose tissue collate to the HFD-fed group. GEE treatment also reduced hepatic and serum triglyceride level. Furthermore, GEE treatment significantly inhibited adipogenesis in the GEE group by reducing the protein expression of SREBP-1, ACC and the messenger RNA expression of PPAR𝛾, C/EBP-𝛼, which are adipocyte differentiation-related genes. Conclusions These research outcomes recommend that GEE is possibly valuable for the prevention of HFD-induced obesity via modification of various pathways related with adipogenesis and adipocyte differentiation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.130-137
• /
• 2023

By using XRF (X-ray fluorescence), this study investigates the variation of chemical properties in cement pastes at elevated temperatures. High-temperature conditions were prepared by using an electric furnace, planning a total of 11 target temperatures ranging from room temperature to 1000 ℃. A standard library of geo-quant basic was applied for the analysis of 12 elements in cement paste, including Ca, Si, Al, Fe, S, Mg, Ti, Sr, P, Mn, Zn and K. The results revealed that, as the temperature increased, the proportion of each element in the cement paste also increased. With the exception of a few elements present in extremely low amounts in the cement pastes, the variation in the composition ratio of most elements exhibited a strong correlation with temperature, with an R-squared value exceeding 0.98. In this study, cement pastes exposed to normal and high-temperature environments were compared. The authors established that the reasons for the different results in this comparison can be explained from the same perspective as when comparing raw cement with cement paste. Furthermore, this study discussed the potentially most dominant parameter when investigating the properties of cement paste using XRF.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.1
• /
• pp.411-417
• /
• 2024

In the event of a disaster, it is essential to establish a disaster recovery plan and disaster recovery system to minimize disruption to major IT infrastructure and provide continuous business services. In the process of building a disaster recovery system, data replication is a key element of data recovery to provide uninterrupted and continuous business services in the event of a disaster. The data replication method can be determined depending on the system configuration environment and disaster recovery goal level. In this paper, we present a method for determining a data replication method suitable for the configuration environment and disaster recovery target level when building a disaster recovery system. In addition, the replication method decision procedure is applied to build a disaster recovery system and analyze the construction results. After establishing the disaster recovery system, a test was conducted to determine whether the service was transferred to the disaster recovery center in a disaster situation and normal service was provided, and the results were analyzed. As a result, it was possible to systematically select the optimal data replication method during the disaster recovery system construction phase. The established disaster recovery system has an RTO of 3.7 hours for service conversion to the disaster recovery center to provide continuous business services, and the disaster recovery level, which was Tier 2, has been improved to the target level within 4 hours of RTO and RPO=0.