Journal of the Korean Recycled Construction Resources Institute (한국건설순환자원학회논문집)

Korean Recycled Construction Resources Institute (한국건설순환자원학회)
권호 표지
DOI QR코드

DOI QR Code

Bond Behavior of Epoxy Coated Reinforcement Using Direct Pull-out Test and Beam-End Test

직접인발시험과 보-단부 시험을 이용한 에폭시 도막 철근의 부착특성

  • Kim, Jee-Sang (Department of Civil Engineering, Seokyeong University) ;
  • Kang, Won Hyeak (Department of Urban Infrastructure and Disaster Prevention Engineering, Seokyeong University)
  • 김지상 (서경대학교 토목공학과) ;
  • 강원혁 (서경대학교 도시기반방재안전공학과)
  • Received : 2019.08.30
  • Accepted : 2019.09.16
  • Published : 2019.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

The corrosion of reinforcements embedded in concrete causes severe deterioration in reinforced concrete structures. As a countermeasure, epoxy coated reinforcements are used to prevent corrosion of reinforcements. When epoxy coated bars are used, the resistance of corrosion is excellent, but epoxy coating on the bars have a disadvantage of reduction in bond capacity comparing to that of normal bars. Therefore, it is necessary to confirm the bond performance of epoxy coated reinforcements through experimental and analytical methods. Bond behaviors of epoxy coated bars for various diameters of 13 and 19mm and thicknesses of cover concrete of 3 types(ratio of cover to bar diameter) are examined. As the diameters of the epoxy coated bars increase, the difference of bond strength between epoxy coated and uncoated bars also increases and damage patterns showed pull out failure. In addition, finite element analysis was performed based on the bond-slip relationship obtained by direct pullout test and compared with the flexural test results. It is considered that flexural member test is more useful than pullout test for simulating the behavior of actual structure.

철근 콘크리트 구조물에서 철근의 부식은 내구성 문제를 발생시키고 있으며, 이에 대한 대책의 하나로 에폭시 도막철근이 사용되고 있다. 그러나 에폭시 도막철근을 사용하는 경우 철근 부식에 대한 저항성능은 우수하나 철근에 에폭시 도막을 함으로써 콘크리트와의 부착력이 일반철근에 비하여 감소하는 단점이 있다. 따라서 부착성능에 대한 실험적인 확인이 필요하여 ACI 408R에서 제시하는 대표적인 실험 방법인 휨 부재를 통하여 부착거동을 연구할 수 있는 보-단부 test와 직접인발을 통해 부착 특성을 분석하는 Pullout test를 통하여 부착성능을 평가하였다. 에폭시 도막 철근의 부착실험은 휨 부재실험과 직접인발 실험 모두 지름 13, 19mm의 철근에 대한 콘크리트 도막두께를 철근 지름의 3배로 하여 수행되었다. 실험 결과 에폭시 도막철근의 부착강도는 철근의 지름이 증가할수록 에폭시 도막 철근과 일반철근의 부착강도차이가 증가하였고 파괴형상은 모두 뽑힘 파괴를 나타내었다. 또한, 직접인발시험으로 구한 부착-미끌림 관계에 근거하여 유한요소해석을 수행하고, 휨 실험결과와 비교하였다. 부착성능을 평가하는 방법으로 실제 구조물에 거동을 모사를 위해서 직접인발시험보다 휨 부재시험이 보다 유용한 것으로 사료된다.

Keywords

References

  1. ACI 318. (2014). Building Code Requirements for Structural Concrete(ACI318-14).
  2. ACI 408R-03 (2003). Bond and Development of Straight Reinforcing Bars in Tension, ACI Committee 408, 6-8.
  3. ASTM A775/A775M. (2014). Standard Specification For Epoxy-Coated Steel Reinforcing Bars ASTM international.
  4. CEP-FIP. (2000) Bond of Reinforcement in Concrete, fib, Bulletin 10, Switzerland.
  5. CEB-FIP. (1991). "CEB-FIP model code 1990," Comite Euro Intemational Du Beton, Paris, 87-109.
  6. Choi, O.C. (1990). Bond of epoxy-coated reinforcing bars-an update, Journal of the Architectural Institute of Korea, 10(2), 539-542.
  7. Choi, O.C., Kim, C.H., Shin, Y.S., Hong, G.S. (1994). Performance tests of epoxy-coated reinforcing bars: mechanical properties, Journal of the Korea Concrete Institute, 6(3), 173-179.
  8. Jang, H.G., Kim, S.H., Hong, C.W., Yun, K.K. (2003). Characteristics of bond strength with measuring methods of concrete, Journal of the Korean Concrete Institute, 597-600.
  9. Jung, C.G., Jung, H.Y., Kim, J.S., Shim, S.P., Shim, J.A. (2018). An improvement of quality standard and construction quality control for field application of epoxy-coated reinforcing bars, Journal of the Korean Recycled Construction Resources Institute, 6(3), 190-198. https://doi.org/10.14190/JRCR.2018.6.3.190
  10. Jung, K.O. (2003). Study on The Calculation of Lap Splices Length in High-Strength Concrete Flexural Members, Chonnam University.
  11. Kim, J.S., Lee, S.H., Choi, J.W. (2017). "An experiment on bond-slip behavior of epoxy coated rebar made by IGBT method," 2nd International Conference On Functional Materials and Steel, 241-245.
  12. Korea Concrete Institute (2017). KCI Design Code for Concrete Structures.
  13. KS D 3629 (1995). Fusion Bonded Epoxy Coated Reinforcing Steel Bars.
  14. Lee, M.S., Seo, T.S., Roh, Y.S. (2011). Experimental study on bond properties of high strength RC flexural member at stabilized crack stage, Journal of the Architectural Institute of Korea Strucrture & Construction, 27(9), 37-44.
  15. Lee, S.H. (2018). Quality Assessment and Bond Characteristics of Epoxy Coated Reinforcements, Seokyeong University.
  16. Midas it. (2008). Midas FEA On-Line Manual, Advanced Nonlinear and Detail Analysis Program.
  17. Ministry of Land, Infrastructure and Transport (MOLIT) (2016). Korean Highway Bridge Design Code(Limit State Design), MOLIT.
  18. Oh, B.H., Um, J.Y., Kwon, J.H. (1992). An experimental study on corrosion resistance of epoxy coated reinforcements, Journal of the Korea Concrete Institute, 4(4), 161-170.
  19. RILEM (1970). Technical Recommendations for the Testing and Use of Construction Materials: RC 6, Bond Test for Reinforcement Steel, 2, Pull-out Test.
  20. Seo, T.S., Ha, S.S., Lee, M.S. (2009). Study on bond properties of RC flexural member at stabilized crack stage, Journal of the Architectural Institute of Korea Strucrture & Construction, 25(5), 113-120.
  21. Yoo, K.S., Lee, S.H., Kim, J.S. (2018). "Bond strength of epoxy coated reinforcements for various compressive strength of concrete using direct pull-out test," 6th Annual International Conference on Architecture and Civil Engineering (ACE 2018), 180-184.