• Journal of Korean Society for Quality Management
• /
• v.35 no.1
• /
• pp.10-19
• /
• 2007

ANOVA is widely, used for measurement system analysis. It assumes that the measurement error is normally distributed, which nay not be seen in some industrial cases. In this study the estimates of the measurement system variability and PTR (precision-to-tolerance ratio) are obtained by using weighted standard deviation for the case where the measurement error is non-normally distributed. The Standard Bootstrap method is used foy estimating confidence intervals of measurement system variability and PTR. The point and confidence interval estimates for the cases with normally distributed measurement error are compared to those with non-normally distributed measurement errors through computer simulation.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.3 no.1
• /
• pp.7-14
• /
• 2004

Machining error is defined the normal distance between designed surface and actual tool path with tool deflection. This is inevitably caused by the tool deflection, tool wear, thermal effect and machine tool errors and so on. Among these factors, tool deflection is usually known as the most significant factor of machining error. Tool deflection problem is analyzed using Instantaneous horizontal cutting forces. The high quality and precision of machining products are required in finishing. In order to achieve these purposes, it is necessary work that decrease the machining error. This paper presents a study on the machining error caused by the tool deflection in ball end milling of 2 dimensional surface. Tool deflection model and simple machining error prediction model are described. This model is checked the validity with machining experiments of 2 dimensional surface. These results may be used to decrease machining error and tool path decision.

• Journal of Korean Clinical Health Science
• /
• v.2 no.4
• /
• pp.223-230
• /
• 2014

Purpose. Scheduled calibration of refractive error's have various refractive surgery, and a side effect of post refractive surgery for refractive errors's before refractive surgery, by analyzing the eye condition of the refractive error's good state, it tries to increase the satisfaction of refractive error's refractive surgery. Methods. In response to 60 people preoperative data 20-30 generations of age, were analyzed for eye conditions. Results. IOP, thickness of the cornea, liquid leakage amount inspection, the corneal endothelium inspection, the size of the pupil, have been conducted auto refraction test and showed a numerical value in most normal range. Conclusion. Surgery can be of individual differences of patients, it is difficult to define the full normal range, to the surgery based on the case of this study, the side effects of patients after surgery is expected to be prevention.

• Journal of Advanced Navigation Technology
• /
• v.18 no.4
• /
• pp.319-324
• /
• 2014

Line operation safety audit (LOSA) is the proactive data collection system to capture the accident and serious incident caused by flight crew and is the safety management program for collecting threat error management (TEM) and crew resource management (CRM) during normal operations. The typically LOSA is written by hand, manages and archives the LOSA Observation Worksheet. But, this method is not easy to archive and ensure confidentiality of the LOSA worksheets. As we implemented the K-LOSA of the web-document type instead of the existing LOSA archive method and change the TEM category code. we yields to archive the efficient data management and confidentiality. In this paper, we introduce the LOSA and to configure the K-LOSA program.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 1998.11a
• /
• pp.198-207
• /
• 1998

The p chart approximate to the normal distribution has a difficulty to analyze the process condition precisely when the negative LCL is occurred. Furthermore, the probability of Type I error increases compared with using its original binomial distribution. For a long time the p chart has been used as approximated to the normal distribution because of its easy use. However, it becomes rapid and convenient to calculate the binomial distribution through the development of computer and software, so it is strongly suggested to use the binomial distribution determining control limits to reduce the probability of Type I error. In this study, I suggest that the control limits can be designed in use of binomial distribution and they can be utilized without special software by illustrating the certain work for establishing p-chart with the commercial one(EXCEL).

• Journal of Korean Society for Quality Management
• /
• v.25 no.3
• /
• pp.74-85
• /
• 1997

In this paper we calculate the subgroup size necessary for detecting the change of percent defective with several detection probabilities for orginal population fraction nonconforming p, changed population fraction nonconforming $p^*$, and the ratio k=$p^*$/p in the usage of p control charts. From our calculation we can know the error level of normal a, pp.oximation in detection probability calculation and recommend the subgroup size with lower error levels of normal a, pp.oximation, and then we show the reasonable subgroup size necessary for p, $p^*$, k, and the detection probability of the change of fraction nonconforming in a process. The information that we here show in tables will be useful when p control chart users decide the subgroup size in the p control chart users decide the subgroup size in the p control chart.

• Journal of the Korean Data and Information Science Society
• /
• v.9 no.2
• /
• pp.95-103
• /
• 1998

Azzalini and Bowman proposed the pseudo-likelihood ratio test for checking the linear relationship using kernel regression estimator when the error of the regression model follows the normal distribution. We modify their method with the bootstrap technique to construct a new test, and examine the power of our test through simulation. Our method can be applied to the case where the distribution of the error is not normal.

• Journal of Biosystems Engineering
• /
• v.23 no.1
• /
• pp.67-74
• /
• 1998

A nondestructive quality inspection technique using acoustic impulse response method was developed for eggshell inspection. An experimental system was built to generate the impact force, to measure the response signal and to analyze the frequency spectrum. This system includes an impulse generating unit, an egg holding seal a microphone with preamplifier, and a DSP board installed on Personal Computer. A simple algorithm .was developed for crack detection. Using the developed system with algorithm, crack detection ability was evaluated and the error rate to estimate the normal egg as cracked was found to be 4% and the error rate to estimate the cracked egg as normal was also found to be 4%. This system could be adopted in industry with some modification.

• Journal of Korean Society for Quality Management
• /
• v.23 no.4
• /
• pp.42-51
• /
• 1995

The bootstrap confidence intervals are a computer-based method for assigning measures of accuracy to statistical estimators. In this paper we examine the small sample behavior of the Kaplan-Meier and Nelson-type estimators for the survival function using the bootstrap and asymptotic normal-theory confidence intervals. The Nelson-type estimator is nearly always better than the Kaplan-Meier estimator in the sense of achieved error rates. From the point of confidence length, the reverse is true. Also, we show that the bootstrap confidence intervals are better than the asymptotic normal-theory confidence intervals in terms of achieved error rates and confidence length.

• Speech Sciences
• /
• v.12 no.1
• /
• pp.15-25
• /
• 2005

The purpose of the present study was to investigate the characteristics of metalinguistic awareness of children with specific language impairment. Forty-five children participated in this study; 15 children with specific language impairment (SLI group) whose range of the language age was 4;6-6;6, 15 normal children chronological age matched (CA controls) and 15 normal children language age matched with the SLI group (CA controls). A metalinguistic task involving the identification and revision of syntactic, semantic, and phonologic errors was used. The SLI group performed significantly poorer than CA controls as well as LA controls in identifying and correcting error sentences, especially sentences with syntactic error. These results revealed the relation between language problems of children with SLI and metalinguistic abilities.