• 제목/요약/키워드: Non-Polarization

검색결과 282건 처리시간 0.028초

광섬유 Sagnac 간섭계를 이용한 초음파의 비접촉식 감지 (Non-contact Detection of Ultrasonic Waves Using Fiber Optic Sagnac Interferometer)

  • 이정주;장태성;이승석;김영길;권일범;이왕주
    • 대한기계학회논문집A
    • /
    • 제25권9호
    • /
    • pp.1400-1409
    • /
    • 2001
  • This paper describes a fiber optic sensor suitable for non-contact detection of ultrasonic waves. This sensor is based on a fiber optic Sagnac interferometer. Quadrature phase bias between two interfering laser beams in Sagnac loop is introduced by a polarization controller. A stable quadrature phase bias can be confirmed by observing the interferometer output versus phase bias. This method eliminates a digital signal processing for detection of ultrasonic waves using Sagnac interferometer. Interference intensity is affected by the frequency of ultrasonic waves and the time delay of Sagnac loop. Collimator is attached to the end of the probing fiber to focus the light beam onto the specimen surface and to collect the reflected light back into the fiber probe. Ultrasonic waves produced by conventional ultrasonic transducers are detected. This fiber optic sensor based on Sagnac interferometer is very effective for detection of small displacement with high frequency such as ultrasonic waves used in conventional non-destructive testing.

Cp-Ti와 Ti-6Al-4V 합금으로 제조된 치과용 임플란트의 부식특성에 관한 블라스팅과 산세처리의 영향 (Effects of Blasting and Acidic Treatment on the Corrosion Characteristics of Dental Implant Fabricated with Cp-Ti and Ti-6Al-4V Alloy)

  • 문영필;최한철;박수정;김원기;고영무
    • 한국표면공학회지
    • /
    • 제39권4호
    • /
    • pp.190-197
    • /
    • 2006
  • The effects of blasting and acidic treatment on the corrosion characteristics of dental implant fabricated with Cp-Ti and Ti-6Al-4V alloy have been researched by using electrochemical methods. The fabricated implants were cleaned and sandblasted by $Al_2O_3$ powder and then acidic treatment was carried out in nitric acid solution. The surface morphology were observed using scanning electron microscope. The corrosion behaviors were investigated using potentiosat and EIS in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The potentio-dynamic test in 0.9% NaCl indicated that the corrosion potential of blasting and acidic treated implant was lower than that of non treated implant, but current density was higher than that of non treated implant. From the cyclic potentiodynamic test results of Ti implant, the passivation current density of blasting and acidic treated implant slightly higher than that of non treated implant. From A.C. impedance test results in 0.9% NaCl solution, polarization resistance($R_p$) value of blasting and acidic treated implant was lower than that of non treated implant. In case of blasting and acidic treated implant surface, the pits were observed in valley and crest of implant surface.

수용성 흑색 착색제의 개발과 이의 응용 (The Development of Water-Soluble Black Coloring Agent and Its Application)

  • 김무길;정병호;문명준;김상수
    • 열처리공학회지
    • /
    • 제15권5호
    • /
    • pp.213-218
    • /
    • 2002
  • In order to develop the economic and environmental water-soluble black coloring agent, some adequate chemical mixtures were mixed and this solution was applied to coat quenched and tempered 51B20 steel bolt. Some basic properties of the solution and characteristics of the coated film in addition to the corrosion resistance were investigated. The developed 100 kg of water-soluble black coloring agent solution was a chemical mixture consisted of 10 kg of aqueous coloring agent, 40 kg of surface active agent, 0.3 kg of anti-foam agent and $50{\ell}$ of water. The coated film of the bolt was composed of hard layer of about $2{\mu}m$ and the disbondable soft layer of about $4{\mu}m$ above the hard layer. Many surface active agents peaks and a few hydrophilic peaks were observed in the coated film. Surface roughness value of the coated bolt was lower than that of the non-coated bolt. Corrosion resistance of the coated bolt considerably improved and also relatively showed a good polarization resistance at test condition of $40^{\circ}C$ colorizing temperature and 5% the solution concentration in 3% NaCl anodic polarization test. Initial appearance time of the surface rust was greatly retarded owing to the coated film in salt spray test.

궤도경사각을 가진 통신위성의 빔 포인팅에 대한 연구 (THE BEAM POINTING OF COMMUNICATIN SATELLITE IN GEOSYNCHRONOUS INCLINED ORBIT)

  • 김방엽;최규홍
    • Journal of Astronomy and Space Sciences
    • /
    • 제12권1호
    • /
    • pp.112-122
    • /
    • 1995
  • 1995년 7월에 발사될 무궁화호 통신위성이 원지점 모터 분사의 오차로 인해 예정된 지구정지궤도진입에 실패했을 경우를 가정하였다. 원지점 모터 분사시에 연료 저장 상태의 불균형, 추력축의 회전 등으로 인하여 원지점 모터 분사가 잘못되어, 통신위생이 정지 궤도 요소 충 궤도 경사각이 $0^{\circ}$가 아닌 지구 통주기 궤도를 도는 상황을 모의실험하였다. 이 때, 궤도 의 진화과정을 섭통론을 통해 분석하였고 이심율과 경사각의 변화를 조사하였다. 궤도 경사각이 $0^{\circ}$가 아닌 지구동주기 궤도를 도는 통신위성이 8자 궤적을 그리게 되면 빔 지향점도 위성의 이동에 따라 움직이는데 이 문제를 해결하기 위해 위성의 roll각을 조정하여 빔 지향점을 고정시킬 수 있는 알고리즘을 무궁화호에 적용시켰다. 그리고 승교정과 강교점을 통과할 때 일어나는 펀파면의 회전 현상도 통신 효율에 큰 영향을 주는데, 편파변의 회전 현상을 줄일 수 있는 yaw각 조정방법올 역시 무궁화호에 적용했다.

  • PDF

비파괴 철근 부식 진단을 위한 매립형 미니센서 개발에 관한 기초적 연구 (Fundamental Study on Developing Embedded Mini-Sensor for Nondestructive Diagnosis Corrosion of Rebar)

  • 조성형;임영철;;이한승
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제14권6호
    • /
    • pp.179-187
    • /
    • 2010
  • 콘크리트 내부에 매설된 철근의 부식은 철근콘크리트구조물의 조기 성능저하와 붕괴의 주요원인이 되고 있다. 철근콘크리트 구조물에 발생하는 열화현상 중에서 철근부식에 의해 발생되는 염해는 그 피해가 다른 열화 현상보다 심하고 구조물의 보수 및 시공 측면에서도 막대한 경비가 요구되고 보수시기 또한 정하기 힘들다. 따라서 철근의 부식상태에 대한 조기발견은 관리자의 효율적인 보수 및 보강계획 수립을 위해 매우 중요하다. 한편 철근 부식을 평가하는 방법 중 비파괴측정이 많이 사용되고 있다. 특히 CM-II(corrosion meter) 측정기는 자연전위와 분극저항 및 콘크리트 비저항을 측정할 수 있어서 많이 사용되지만 몇 가지 단점을 가지고 있다. 이러한 단점을 극복하기 위해 매립형 미니센서가 개발되어져 왔다. 이 미니센서를 이용하여 철근 부식을 측정한 후 CM-II(corrosion meter)의 측정결과와 비교분석하여 개발된 미니센서의 타당성을 검증하였다.

희생양극의 수명에 미치는 인접 강파일의 음극방식 영향 (Effect of Cathodic Protection of Adjacent Steel Piles on the Life of Sacrificial Anode)

  • 문경만;이규환;조황래;이명훈;김윤해;김진경
    • 한국해양공학회지
    • /
    • 제22권3호
    • /
    • pp.76-81
    • /
    • 2008
  • There are two cases when the life of a sacrificial anode is shortened from the designed life: one case results from self-corrosion of the anode due to contamination by sea water in the other case, however, electrical current to protect some given steel piles overflows to protect other, adjacent non-protected steel piles. In this study, the variation of polarization potential of nine steel piles, being protected cathodically and with anode-producing current between anode and steel piles, was investigated. Parameters were varied, such as the eighth and ninth steel piles either connected electrically or not, and whether the ninth steel pile was protected by another sacrificial anode or not. The current produced by the sacrificial anode decreased when the ninth steel pile was cathodically protected by the anode of another pile. However, produced current increased when the ninth steel pile was not connected to another anode. The study concludes that the life of a sacrificial anode can be prolonged or shortened depending on whether adjacent steel piles are cathodically protected or not.

Polarization of Rayleigh Scattered Lyα in Active Galactic Nuclei

  • Chang, Seok-Jun;Lee, Hee-Won;Yang, Yujin
    • 천문학회보
    • /
    • 제41권1호
    • /
    • pp.70.3-70.3
    • /
    • 2016
  • Active galactic nuclei (AGNs) typically show a non-thermal continuum locally represented by a power-law and many prominent emission lines in the UV and optical regions. AGNs are classified by two types, where Type I AGNs exhibit both broad and narrow lines and only narrow lines are observed in Type 2 AGNs. The unification models of AGNs invoke the existence of a molecular torus just outside of the broad line region. In the presence of a high column HI region associated with the molecular torus, we propose that significant fraction of broad line photons near Lyman series can be scattered by atomic hydrogen in the torus. In particular, $Ly{\alpha}$ being the strongest emission line, strong linear polarization may develop around $Ly{\alpha}$ through Rayleigh scattering. We adopt a Monte Carlo technique to investigate the polarized transfer of $Ly{\alpha}$ in a thick HI region with the shape of a torus. We consider the range of HI column density N_HI = 1020-23 with fixed geometric parameters of the torus such as the inner and outer radii and the height. We present the polarized spectra and angular distribution of Rayleigh scattered radiation around $Ly{\alpha}$. We find that the $Ly{\alpha}$ core part is polarized in the direction perpendicular to the symmetry axis whereas in the far wing part it is polarized in the parallel direction. It is concluded that the unification of AGNs implies that $Ly{\alpha}$ can be uniquely polarized through Rayleigh scattering.

  • PDF

CALIPSO위성 탑재 라이다를 이용한 동북아시아 지역의 대기 에어러솔 3차원 광학특성 분포 (3-D Perspectives of Atmospheric Aerosol Optical Properties over Northeast Asia Using LIDAR on-board the CALIPSO satellite)

  • 이권호
    • 대한원격탐사학회지
    • /
    • 제30권5호
    • /
    • pp.559-570
    • /
    • 2014
  • 위성 탑재 라이다 시스템이 관측하는 후방산란 신호는 대기 에어러솔의 3차원 공간적인 분포 특성 및 시간적인 변화를 탐지할 수 있게 한다. 본 연구에서는 Cloud-Aerosol LIDAR and Infrared Pathfinder Satellite Observation(CALIPSO) 위성에 탑재된 Cloud-Aerosol LIDAR with Orthogonal Polarization(CALIOP) 라이다 관측자료를 이용하여 2012년 한 해 동안의 동북아시아 지역(북위 20도 - 50도, 동경 110 도 - 140 도)의 대기 에어로졸의 시공간 분포를 분석하였다. 입자 소산계수와 편광소멸도의 통계 분석으로부터 각 고도별 에어러솔 입자의 광학 특성정보를 분석하였고, 각 계절별 에어러솔 광학 특성값의 연직분포정보를 정량화할 수 있었다. 또한, 편광소멸도 자료는 연중 0.5 이상의 큰 값을 보이고 있어 지역 대기에는 비구형성 입자에 의한 영향이 많이 받고 있음을 알 수 있었다. 본 연구는 지역적 규모의 3차원 에어러솔 분포 정보에 대한 기초연구로서, 향후 추가 자료 조사를 통하여 보다 다양한 이벤트성 사례와 에어러솔 기후학적 정보를 생산할 것이다.

Improvement of the Figure of Merit in Pb[(Mg1/3Ta2/3)0.7Ti0.3]O3 Systems

  • Kim, Yeon Jung
    • Applied Science and Convergence Technology
    • /
    • 제25권5호
    • /
    • pp.88-91
    • /
    • 2016
  • The $Pb[(Mg_{1/3}Ta_{2/3})_{0.7}Ti_{0.3}]O_3$+xwt%PbO systems at temperature of $1250^{\circ}C$ for 4 hours was successful synthesized. In this study, PbO-doped $Pb[(Mg_{1/3}Ta_{2/3})_{0.7}Ti_{0.3}]O_3$ systems with non-linear behaviors showed ordering-degree dependence at the low temperature range were prepared using the columbite precursor method. And the characteristic of remnant polarization vs. electric field were analyzed. The pyroelectric, dielectric and piezoelectric properties of partially disordered $Pb[(Mg_{1/3}Ta_{2/3})_{0.7}Ti_{0.3}]O_3$+xwt%PbO solid solutions were studied as a function of temperature, frequency, and electric field. It showed distinct features of temperature dependent of pyroelectric coefficient, spontaneous polarization and dielectric constant at about $50^{\circ}C$. The figure of merit was calculated as pyroelectric coefficient, dielectric constant and dissipation factor. It was found that the high voltage responsivity FV, high detectivity FD were $0.0373m^2/C$ and $0.6735{\times}10^{-4}Pa{-1/2}$, respectively, in the $Pb[(Mg_{1/3}Ta_{2/3})_{0.7}Ti_{0.3}]O_3$+3.0 wt%PbO system.

Fe-31Cr-27Ni-1.6Mo-1.5W-0.26N계 초내식성 스테인리스강의 생체적합성 및 부식특성에 미치는 Co함량의 영향 (Effect of Cobalt Contents on the Biocompatibility and Corrosion Properties of Fe-31Cr-27Ni-1.6Mo-1.5W-0.26N Alloy)

  • 장순근;유영란;남희수;심규태;김정구;김영식
    • 대한금속재료학회지
    • /
    • 제46권4호
    • /
    • pp.209-216
    • /
    • 2008
  • Super austenitic stainless steels shows the high PRE (Pitting Resistance Equivalent) number and the good corrosion resistance. This work controlled the Co contents in Fe-31Cr-1.7Mo-27Ni-0.25N alloys to elucidate the effect of cobalt contents on the biocompatibility and corrosion resistance. Increasing Co contents, the hardness of the annealed alloys tends to be reduced. In aged alloys, cobalt decreased the increments of hardness by aging treatment. Cobalt decreased the critical pitting temperature (CPT) in 6% $FeCl_3$ + 1% HCl solution, but improved the anodic polarization behavior in Hanks' balanced salt solution and artificial saliva solution. Repassivation rate in artificial body solutions was improved by increasing cobalt contents, but didn't show the linear relationship to PRE number of the alloys. The experimental alloys showed the non-cytotoxicity because of its high corrosion resistance.