• 스마트미디어저널
• /
• 제9권4호
• /
• pp.97-101
• /
• 2020

본 연구에서는 센서상의 전하량 변화를 통하여 전위차를 측정할 수 있는 수동형 전기장센서를 이용하여 사람의 손동작에 의해 유발되는 신호를 측정 장치의 전원이나 주변 전력선에 의해 센서에 유입되는 잡음(PLN: Power Line Noise)의 고조파 성분을 분석하여 동작신호를 검출하고 추출하는 연구를 수행 한다. 전기장 센서에 유입되는 전력선잡음으로 센서가 사람의 존재, 접근, 동작에 의해 영향 받는 사실을 이용해 PLN의 주성분인 60Hz 고조파 성분의 스펙트럼분석을 수행하여 PLN 신호의 증가 또는 감소를 식별할 수 있고 상대적으로 동작에 민감한 120Hz 성분을 이용한다. FFT를 사용하여 120Hz의 신호성분이 특정 임계값을 통과할 때 신호를 검출하는 방법이다. 동작이 탐지되는 경우 임계값을 기준으로 프레임을 결정한다. 본 연구의 방법을 이용하여 얻은 동작 감지 성공률은 약 90% 수준을 달성하였다. 이렇게 감지된 동작신호로 추출한 프레임의 정확도는 약 85%이다. 수동형 전기장 센서를 이용하여 동작신호를 PLN을 이용하여 동작검출에 이용한 연구사례는 국내외적으로 드문 사례이며, 본 논문에서는 PLN이 상존하는 실내 적용환경에서 유망하게 활용될 수 있다.

• 한국소음진동공학회논문집
• /
• 제25권4호
• /
• pp.238-246
• /
• 2015

A stepping motor is widely used to operate the elevation and azimuth stage of the X-band antenna with 2-axis gimbal system for effective image data transmission from a satellite to a ground station. However, such stepping motor also generates an undesirable micro-vibration which is one of the main disturbance sources affecting image quality of the high-resolution observation satellite. In order to improve the image quality, the micro-vibration isolation of the X-band antenna system is essential. In this study, the low rotational stiffness isolator has been proposed to reduce the micro-vibration disturbance induced by elevation direction operation of the X-band antenna. In addition, its structural safety was confirmed by the structure analysis based on the derived torque budget. The effectiveness of the design was also verified through the micro-vibration measurement test.

• 한국지역사회생활과학회지
• /
• 제13권2호
• /
• pp.37-51
• /
• 2002

This study was performed to investigate the degree of different stresses and to search the influence of food habit and nutrient intakes at stress situation in university students and secondary school teachers. The data was collected by questionnaire method and searched nutrient intakes by 24 hours recall. The subjects were 282 students and 152 high school teacher in Kyunggi do. Physical status was no difference with two groups. Energy intake of teachers was lower than that of students, but the intakes of vitamin A and C were high in teachers' group. The university students had more stress situation than teachers in almost kind of stresses except overload stress. Self-diagnosed dietary habits were better in the group of teacher. Especially smoke and alcohol drink behavior were correlated with nutrient intakes in male teachers and students. The quantity of nutrient of nutrient intakes was correlated with different kind of stress. The stress of life event was correlated with the intakes of carbohydrate, minerals, thiamin and riboflavin, and the deprivation was with iron and vitamin A in teachers' group. The intake of almost nutrients was correlated with the stress of noise in students' group. By the analysis of stepwise multiple regression, although the $R^2$ values were very low, vitamin C intake was influenced in the factor at the stress of life events($R^2$=0.025), self-efface($R^2$=0.030) and noise($R^2$=0.020), thiamin was at food induced stress ($R^2$=0.021) and vitamin A was at the stress of type A behavior($R^2$=0.022) and anxiety response($R^2$=0.014). Therefore, we could concluded that different kind of stresses were influenced in dietary behavior and nutrient intakes. More research would be needed at the aspects of health promotion in the stressful situation of modern society.

• 한국소음진동공학회논문집
• /
• 제25권1호
• /
• pp.13-23
• /
• 2015

이 논문은 원판형 압전 변환기의 면내 방사 진동 특성을 실험적으로 다룬다. 면내 방사 진동은 두께 방향으로 분극이 된 압전 원판에서 푸아송비로 인해 야기되는 것으로서, 레이저 면내 진동 측정기로써 측정되었고, 고유진동수는 임피던스 분석기로써 측정되었다. 실험 결과는 단순화된 이론적 해석과 유한요소 해석으로부터 얻어진 이론적 예측과 비교되었다. 원판형 압전 변환기의 기본 모드는 방사 모드이고, 중심으로부터 가장자리까지의 반경 방향 변위 분포는 단조 증가가 아니라 원주면에서 약간 떨어진 위치에서 최대 값을 나타낸다. 지름 대비 두께 비율이 작은 원판에서 이론적으로 계산된 기본 진동수는 유한요소 결과와 잘 일치하고, 두께/지름 비율 0.4까지 오차 7 % 이내로 정확하다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.71-81
• /
• 2008

This paper proposes a spectral element which can represent dynamic responses in high frequency domain such as Lamb waves on a thin plate. A two layer beam model under 2-D plane strain condition is introduced to simulate high-frequency dynamic responses induced by piezoelectric layer (PZT layer) bonded on a base plate. In the two layer beam model, a PZT layer is assumed to be rigidly bonded on a base beam. Mindlin-Herrmann and Timoshenko beam theories are employed to represent the first symmetric and anti-symmetric Lamb wave modes on a base plate, respectively. The Bernoulli beam theory and 1-D linear piezoelectricity are used to model the electro-mechanical behavior of a PZT layer. The equations of motions of a two layer beam model are derived through Hamilton's principle. The necessary boundary conditions associated with electro mechanical properties of a PZT layer are formulated in the context of dual functions of a PZT layer as an actuator and a sensor. General spectral shape functions of response field and the associated boundary conditions are formulated through equations of motions converted into frequency domain. A detailed spectrum element formulation for composing the dynamic stiffness matrix of a two layer beam model is presented as well. The validity of the proposed spectral element is demonstrated through comparison results with the conventional 2-D FEM and the previously developed spectral elements.

• 한국소음진동공학회논문집
• /
• 제22권8호
• /
• pp.748-755
• /
• 2012

Friction causes self-excited vibration, stick-slip vibration and any other friction-induced phenomena. That kinds of vibrations cause chatter and squeal. In order to predict such vibrations accurately, employing an accurate friction model is very important because a dynamic behavior of a system with friction is dominantly governed by a friction model. A Coulomb friction model is the most widely known model. Coulomb friction model is useful model to obtain analytical solutions of the system with friction and the model gives relatively good simulation result. However, defining a friction force at a stick state in simulation is hard because of the characteristic itself and a Coulomb friction model is discontinuous function between a static and a dynamic friction coefficient. Therefore, applying the Coulomb friction model to a simulation is not appropriate. In order to resolve these problems, an approximated Coulomb friction model was developed using simple and continuous function. However, an approximated Coulomb friction model cannot realize stick. Therefore, an approximated Coulomb friction model cannot describe friction phenomena accurately. In order to analyze a friction phenomenon accurately, a friction model for a simulation was proposed in this paper. A proposed friction model realizes stick and gives reasonably good results compared to results obtained by the simulation employing an approximated Coulomb friction model. Accuracy of a proposed friction model was verified by comparing experimental results.

• 한국전기전자재료학회논문지
• /
• 제23권6호
• /
• pp.449-453
• /
• 2010

In this paper, the electrical characteristics of Fin-type SONOS(silicon-oxide-nitride-oxide-silicon) flash memory device with different trapping layers are analyzed in depth. Two kinds of trapping layers i.e., silicon nitride($Si_3N_4$) and hafnium oxide($HfO_2$) are applied. Compared to the conventional Fin-type SONOS device using the $Si_3N_4$ trapping layer, the Fin-type SOHOS(silicon-oxide-high-k-oxide-silicon) device using the $HfO_2$ trapping layer shows superior program/erase speed. However, the data retention properties in SOHOS device are worse than the SONOS flash memory device. Degraded data retention in the SOHOS device may be attributed to the tunneling leakage current induced by interface trap states, which are supported by the subthreshold slope and low frequency noise characteristics.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.197-201
• /
• 2007

Vibration characteristics of an annular cylindrical fuel rod, which was proposed as a candidate design of fuel's cross section for the ultra-high burnup nuclear fuel, according to the cross-sectional dimensions and the number of supports or the span length were analytically studied. Finite element(FE) modeling for the annular cross sectional fuel was based on the methodology, that have been proven by the test verification, for the conventional PWR nuclear fuel rod. A commercial FEA code, ABAQUS, was used for the FE modeling and analysis. A planar beam element (B21) that uses a linear interpolation was used for the fuel rod and a linear spring element for the spring and dimple of the SG. Natural frequencies and mode shape were calculated according to the preliminary design candidates for the fuel's cross sectional dimension and the number of span. From the analysis results, the design scheme of the annular fuel compatible to the present PWR nuclear reactor core was discussed in terms of the number of supports and fuel's cross section.

• 한국음향학회지
• /
• 제22권7호
• /
• pp.603-611
• /
• 2003

본 논문에서는 잡음 환경에서 보다 강인한 성능을 얻기 위하여 음성 모델 기반의 효과적인 특징 보상 기법을 제안한다. 일반적인 모델 기반의 특징 보상 기법은 오열 음성 데이터베이스를 이용한 훈련 과정을 필요로 하므로 온라인 상에서의 적응 과정에 적합하지 않다. 제안한 방법에서는 보정 인자 추정 과정에서 병렬 모델 결합 기법을 도입함으로써 훈련 과정을 필요하지 않게 하였다. 모델의 결합 과정이 HMM 전체가 아닌 가우시안 혼합 (Mixture) 모델에만 적용이 되므로, 계산이 비교적 간단하게 되어 온라인 상에서의 모델 결합을 가능하게 하였다. 병렬적 모델 결합의 도입은 잡음 모델의 독립적인 이용을 가능하게 하였고, 본 논문에서는 MAP (Maximum A Posteriori) 적응을 통해 잡음 모델 갱신을 실시하였다 또한 잡음 오열 과정에 대한 근사화를 통해 연속적 형태의 채널 정규화 기법을 유도하여 적용하였다. 보다 효율적인 구현을 위하여 선택적인 모델 결합 방식을 도입함으로써 연산량을 줄일 수 있는 방법을 제시하였다. 제안한 특징 보상 기법이 부가적인 배경 잡음과 채널 왜곡이 존재하는 잡음 환경에서 음성 인식 시스템의 성능을 향상시키는데 효과적임을 실험을 통해 확인할 수 있었다.

• Journal of Communications and Networks
• /
• 제2권1호
• /
• pp.76-84
• /
• 2000

Communication systems, including cell-based mobile communication systems, multiple satellite communication systems of multi-beam satellite systems, require reliable handoff methods between cell-to-cell, satellite-to-satellite of beam-to-team, respectively. Recent measurement of a CDMA cellular system indicates that the system is in handoff at about 35% to 70% of an average call period. Therefore, system reliability during handoff is one of the major system performance parameters and eventually becomes a factor in the overall system capacity. This paper presents novel and improved techniques for handoff in cellular communications, multi-beam and multi-satellite systems that require handoff during a session. this new handoff system combines the soft handoff mechanism currently implemented in the IS-95 CDMA with code and packet diversity combining techniques and an iterative decoding algorithm (Turbo Coding). the Turbo code introduced by Berrou et all. has been demonstrated its remarkable performance achieving the near Shannon channel capacity [1]. Recently. Turbo codes have been adapted as the coding scheme for the data transmission of the third generation international cellular communication standards : UTRA and CDMA 2000. Our proposed encoder and decoder schemes modified from the original Turbo code is suitable for the code and packet diversity combining techniques. this proposed system provides not only an unprecedented coding gain from the Turbo code and it iterative decoding, but also gain induced by the code and packet diversity combining technique which is similar to the hybrid Type II ARQ. We demonstrate performance improvements in AWGN channel and Rayleigh fading channel with perfect channel state information (CSI) through simulations for at low signal to noise ratio and analysis using exact upper bounding techniques for medium to high signal to noise ratio.