• Journal of electromagnetic engineering and science
• /
• 제4권2호
• /
• pp.79-86
• /
• 2004

In this paper, the uncertainty in the calibration of coaxial thermal noise sources using a noise figure measuring (NFM) equipment is evaluated. Contributions to the uncertainty such as the calibration uncertainty of the standard noise source, mismatch, measurement of adapter efficiency, ambient temperature variation, and repeatability are evaluated in the frequency range of 10 MHz to 18 ㎓. Results show that the expanded uncertainty(k=2) is 0.23 ㏈ for the noise sources of 5 ㏈ and 15 ㏈ ENR, and 0.27 ㏈ for those of 21 ㏈.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.731-736
• /
• 2004

The exhaust noise of auxiliary engine in ships is directly transmitted to bridge wing with only distance attenuation. It is not easy to find out practical treatment to be applied between exhaust pipe and bridge wing to reduce the transmission of the exhaust noise. In general, therefore, a silencer is fitted to reduce the exhaust noise and correspondingly noise of bridge wing. The silencer should be properly designed under the consideration of the frequency component of the exhaust noise and the required performance such as noise reduction or insertion loss. In general, the gas inside the exhaust pipe flows with high temperature and speed and thus onboard test condition is more adverse than the standard atmospheric condition. In this study, the test method to evaluate silencer performance using a probe microphone is introduced.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권5호
• /
• pp.457-462
• /
• 2018

The purpose of this study was to compare image quality of indirect digital radiography (IDR) system using the International Electro-technical Commission standard (IEC 62220-1), and to suggest the analysis of noise power spectrum (NPS) which were applied to IEC 62220-1 in medical imaging. In this study, Pixium 4600 (Trixell, France) which is indirect flat panel detector (FPD) was used. The size of image receptor (IR) is $7{\times}17$ inch (matrix $3001{\times}3001$) which performed 14bit processing and pixel pitch is $143{\mu}m$. In IEC standard, NPS evaluation were applied to RQA3, RQA5, RQA7 and RQA9. Because of different radiation quality, each region of interesting (ROI) were compared. The results of NPS indicated up to $3.5mm^{-1}$ including low Nyquist frequency. RQA5 indicated the lowest NPS and the others indicated higher NPS results relatively. NPS result of ROI a38 was higher than ROI a92 and this result indicated that there are more noise in left (cathode) than right (anode). This study were to evaluate NPS by using different radiation quality and setting the each ROI, and to suggest the quantitative methods of measuring NPS.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.981-984
• /
• 2005

현재, 영상처리에 있어서 잡음을 제거함과 동시에 영상의 에지성분을 보존하는 필터링 방법에 대한 연구가 활발히 진행되고 있다. 그리고 임펄스 노이즈 환경에서는 SM(standard median) 필터가우수한 잡음 제거 성능을 나타내었으나, 영상의 에지성분에 대한 오류가 발생하고 있다. 이에 따라, SM 필터를 개선한 다양한 방법들이 제안되었으며, CWM(center weighted median) 필터가 대표적이다. 또한, 에지의 보존이나 처리속도의 관점에서 더욱 향상된 성능을 나타내기 위한 방법으로 min-max 연산에 기반한 방법들이 있다 본 논문에서는 임펄스 노이즈에 의해 훼손된 화소에 대해, 그 화소를 둘러 싼 surrounding band의 최대 또는 최소 값을 이용하여 처리하였으며, 시뮬레이션을 통해 제안한 필터의 성능을 기존의 방법과 비교하였다.

• 방송공학회논문지
• /
• 제16권2호
• /
• pp.207-215
• /
• 2011

SC-FDE(Single Carrier with Frequency Domain Equalizer) 전송 방식에서 채널의 다중경로를 통과한 신호들은 채널 지연 확산과 노이즈 영향으로 심하게 왜곡이 되거나 ISI(Inter-Symbol Interference)가 발생된다. 기존 UW(Unique-Word) 기반 SC-FDE 전송 방식중 하나인 반복적 채널 추정은 채널 길이를 안다고 가정하여 추정한 CIR(Channel Impulse Response)의 채널 길이 밖에 있는 노이즈 성분을 시간 영역에서 스무딩을 함으로써 노이즈 성분을 제거한다. 또한, 주파수 영역에서 채널 추정에 사용하는 UW를 복원하여 잔재하는 ISI 성분을 제거함으로써 채널 추정 성능을 향상시킨다. 본 논문은 채널 길이 안으로 있는 노이즈 성분 억압을 통한 채널 추정기법을 제안한다. 노이즈 성분을 억압하기 위해 시간 영역에서 추정된 CIR로 채널 길이 밖에 있는 노이즈 성분을 이용하여 노이즈의 표준편차를 추정하고 본래 신호 샘플에 영향이 안가도록 노이즈 표준편차 이득의 기준을 만든다. 추정된 노이즈의 표준편차와 이득을 이용하여 CIR 샘플들이 기준값 이하 일 때 채널 길이 안에 있는 노이즈 성분을 스무딩을 한다. 시뮬레이션 결과는 채널의 MSE(Mean Square Error)와 BER(Bit Error Rate)을 통하여 제안된 기법을 적용할 때 성능 개선이 나타남을 확인 할 수 있었다.

• 환경영향평가
• /
• 제20권2호
• /
• pp.123-131
• /
• 2011

The objective of this study is to prepare the effective management plan of environmental noise with a noise map, and the guideline on the management plan of environmental noise was suggested through the review of existing application examples. The management plan of environmental noise with a noise map includes the practical contents in the stages of subdivision of management areas, establishment of reduction measures, opinion collection, post investigation, and reformulation of management plan. First, the classification of management regions is performed considering the excess degree of noise standard and the facility type in the phase of subdivision of management areas. Second, the optimal management plan is established through the investigation of regional characteristics and various noise reduction measures in the phase of establishment of reduction measures, which includes the examination of noise reduction effects with a noise map and the budget planning with the costing of noise reduction measures. Third, the opinion survey with a local resident and a expert is carried out in order to prove the validity of the management plan in the phase of opinion collection, and the management plan is modified with gathered opinions. Fourth, the post examination plan with noise measurement is performed in order to verify the real effect of noise reduction measures according to the management plan in the phase of post investigation. Finally, the amendment of the management plan as well as the improvement of a noise map is carried out at a regular cycle in the phase of reformulation of management plan.

• Journal of the Korean Statistical Society
• /
• 제35권4호
• /
• pp.453-458
• /
• 2006

It is well known fact for the iid data that the limiting standard errors of sample autocorrelations are all unity for all time lags and they are asymptotically independent for different lags (Brockwell and Davis, 1991). It is also usual practice in time series modeling that this fact continues to be valid for white noise series which is a sequence of uncorrelated random variables. This paper contradicts this usual practice for white noise. We consider a sequence of martingale differences which belongs to white noise time series and derive exact joint asymptotic distributions of sample autocorrelations. Some implications of the result are illustrated for conditionally heteroscedastic time series.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.283-286
• /
• 1999

A 2㎓, low noise, low power CMOS voltage-controlled oscillator (VCO) with an integrated LC resonator is presented. The design of VCO relies heavily on the on-chip spiral inductor. An optimized spiral inductor with Q-factor of nearly 8 is achieved and used for the VCO. The simulated result of phase noise is as low as -l14 ㏈c/Hz at an offset frequency of a 600KHz from a 2㎓ carrier frequency. The VCO is tuned with standard available junction capacitors, resulting in an about 400MHz tuning range (20%). Implemented in a five-metal 0.25${\mu}{\textrm}{m}$ standard CMOS process, the VCO consumes only 2㎽ from a single 2.5V supply. It occupies an active area of 620${\mu}{\textrm}{m}$$\times$720${\mu}{\textrm}{m}$.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.171-175
• /
• 2006

Recently, two reverberation rooms were built up of 300mm thick concrete walls in non-parallel pentagonal shape to measure the sound absorption, transmission, radiation, and impact insulation of acoustical materials, panels, doors, etc. Various acoustic tests, including the sound transmission test, were carried out to investigate their acoustic performances. In order to improve the performance, several modifications on these acoustical parameters, such as the acoustic mode, the position of specimen, the formation of diffuse field, the location of sound source, and flanking transmission, have been conducted. Through a series of tests, the reverberation rooms have been effectively improved so that it could perform a variety of acoustic tests with the international standard. And then, it is expected to be very helpful in developing the low noise design technology for ships.

• 한국컴퓨터정보학회논문지
• /
• 제21권11호
• /
• pp.23-30
• /
• 2016

In this paper, we propose an adaptive histogram projection technique for dynamic range compression and an efficient detail enhancement method which is enhancing strong edge while reducing noise. First, The high dynamic range image is divided into low-pass component and high-pass component by applying 'guided image filtering'. After applying 'guided filter' to high dynamic range image, second, the low-pass component of the image is compressed into 8-bit with the adaptive histogram projection technique which is using global standard deviation value of whole image. Third, the high-pass component of the image adaptively reduces noise and intensifies the strong edges using standard deviation value in local path of the guided filter. Lastly, the monitor display image is summed up with the compressed low-pass component and the edge-intensified high-pass component. At the end of this paper, the experimental result show that the suggested technique can be applied properly to the IR images of various scenes.