• 한국전기전자재료학회논문지
• /
• 제19권4호
• /
• pp.339-343
• /
• 2006

We observed the application possibility of inductive coupler for the underground high-voltage power line communication by means of analysis of signal transmission characteristics and magnetic properties on annealing temperatures for high-permeability Fe-base amorphous alloys. The best electromagnetic and transmission characteristics were shown in nano-crystalline precipitated alloy annealed at temperature $510^{\circ}C$. The transmission characteristics in the low-frequency band depend on permeability of magnetic core materials and its properties of high-frequency band can be improved by impedance matching. Using the high pass filter embedded in the coupler, other noise signal band except for communication signals could be cut off.

• 대한전자공학회논문지SD
• /
• 제42권2호
• /
• pp.9-14
• /
• 2005

본 논문에서는bulk dynamic threshold voltage MOSFET(B-DTMOS)와 bulk MOSFET(B-MOS)에서 hot carrier 현상으로 인한 RF 성능 저하를 비교하였다. Normal 및 moderate 모드에서 B-DTMOS의 차단주파수 및 최소잡음지수의 열화가 B-MOS 소자 보다 심하지 않음을 알 수 있었다. 실험 견과로부터 hot carrier에 의한 RF 성능 저하가 DC 특성 열화 보다 심함을 알 수 있었다. 그리고 처음으로 hot carrier 현상으로 인한 B-DTMOS 소자의 RF 전력 특성 저하를 측정하였다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.55-58
• /
• 1997

In this paper, we study a signal processing method which extracts each MUAP(motor unit action potential) from EMG(Electromyogram) interference pattern or clinical diagnostic purposes. First of all, differential digital filtering is selected or eliminating the spike components of the MUAP's from the background noise. And, the algorithm identifies the spikes over the certanin threshold by template matching in frequency domain. After missing or false firing actor is cut off at the IPI(inter pulse interval) histogram, we averages the MUAP waveforms from the raw signal using the identified spikes as triggers, and Finally, measures their amplitudes, durations, and numbers of phases. Specially, We introduce algorithm performed by template matching in the frequency domain. A typical 3-s signal recorded from the biceps brachii muscle using a conventional needle electrode during a isometric contraction is used. Finally, the method decomposed five simultaneous active MUAP's from original EMG signal.

• 조명전기설비학회논문지
• /
• 제20권3호
• /
• pp.6-11
• /
• 2006

본 논문은 전력품질 향상을 목적으로 VSC의 새로운 제어 기법의 디자인에 대하여 기술하였다. 전압강하의 빠른 검출 기술은 동기 회전 d q-기준축에서 순시값의 검출을 통해서 구현되었다. 1차 디지털 필터는 노이즈에 대하여 둔감한 특성을 막을 수 있는 검출 알고리즘을 부가하였다. 필터의 전체 검출과 컷오프 주파수 사이에서 관계에 대하여 기술하였다. 에너지 저장 요소로서 사용되는 캐패시터 뱅크의 사이즈는 회로 해석으로서 입 출력 에너지의 관점에서 디자인 되었다. 마지막으로, 제안된 기법의 유효성은 모의실험을 통하여 증명되었다.

• 한국통신학회논문지
• /
• 제37권7B호
• /
• pp.606-612
• /
• 2012

가시광 통신은 반도체 LED를 이용하여 정보를 브로드캐스트 하며, 백색광 LED는 조명과 광무선 통신을 하나의 광원을 사용하여 제공할 수 있다. 본 논문에서는 단일칩 백색광 LED를 활용하여 조명과 통신에 적합한 조명기구를 제안한다. 백생광 LED 조명기구의 구조에 따른 수평 조도특성, 무선채널 대역특성, 심볼간 간섭현상, 신호대 잡음비 및 비트 에러율을 분석함으로써 장애물이 있는 경우 제안한 LED 조명이 기존의 조명보다 우수한 조명 및 통신 채널을 제공함을 보이고자 한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.208-211
• /
• 2005

This paper presents an ultra-low partial discharge(PD) measurement system that has been accepted as a non-destructive method to estimate electrical insulation of low-voltage electric devices. The PD measurement system is composed of a coupling network, a low noise amplifier, and associated electronics. A shielding box is used to make a better condition against electromagnetic interference. A low cut-off frequency of the coupling network was 1MHz(-3 dB). Calibration tests on laboratory set-up have shown that the PD measurement system has a stable sensitivity of 11.4mV/pC. In an application experiment on a low-voltage induction motor(5HP), we could detect 0.77pC level of partial discharge pulse at the applied voltage of AC 664 V$_{peak}$.

• 한국전기전자재료학회논문지
• /
• 제20권6호
• /
• pp.491-495
• /
• 2007

This paper has demonstrated the electrical properties of SiGe pMOSFETs fabricated on both bulk-Si and PD SOI substrates. Two principal merits, the mobility increase in strained-SiGe channel and the parasitic capacitance reduction of SOI isolation, resulted in improvements in device performance. It was observed that the SiGe PD SOI could alleviate the floating body effect, and consequently DIBL was as low as 10 mV/V. The cut-off frequency of device fabricated on PD SOI substrate was roughly doubled in comparison with SiGe bulk: from 6.7 GHz to 11.3 GHz. These experimental result suggests that the SiGe PD SOI pMOSFET is a promising option to drive CMOS to enhance performance with its increased operation frequency for high speed and low noise applications.

• 한국전기전자재료학회논문지
• /
• 제31권4호
• /
• pp.255-260
• /
• 2018

In recent years, increasing electricity use has led to considerable interest in green energy. In order to effectively supply, cut off, and operate an electric power system, many electric power facilities such as gas insulation switch (GIS), cable, and large substation facilities with higher densities are being developed to meet demand. However, because of the increased use of aging electric power facilities, safety problems are emerging. Electromagnetic wave and leakage current detection are mainly used as sensing methods to detect live-line partial discharges. Although electromagnetic sensors are excellent at providing an initial diagnosis and very reliable, it is difficult to precisely determine the fault point, while leakage current sensors require a connection to the ground line and are very vulnerable to line noise. The partial discharge characteristic in particular is accompanied by statistical irregularity, and it has been reported that proper statistical processing of data is very important. Therefore, in this paper, we present the results of analyzing ${\Phi}-q-n$ cluster distributions of partial discharge characteristics by using K-means clustering to develop an expert partial discharge diagnosis system generated in a GIS facility.

• 전자공학회논문지D
• /
• 제36D권1호
• /
• pp.38-46
• /
• 1999

본 논문에서는 0.25${\mu}m$ T형 게이트 P-HEMT의 제작 및 특성 평가를 하였고, 제작된 P-HEMT를 X-밴드용 3단 MMIC 저잡음 증폭기 설계에 응용하였다.제작된 P-HEMT의 DC 특성은 최대 외인정 전달 컨덕턴스가 400mS/mm이고, 최대 드레인 전류는 400mA/mm이었다. RF 및 잡음 특성은 전류 이등 차단 주파수($f_T$)가 65GHz이고, 주파수 9GHz에서 최소 잡음 지수는 0.7dB, 관련 이득은 14.8dB이었다. 이때의 바이어스 조건은 Vds가 2V이고, Ids는 60%Idss이었다. 저잡음 증폭기 설계에 있어서, 회로 Topology는 인덕턴스 직렬 궤환(Series Feedback)으로 쇼토 스터브(Short Stub)를 사용하였다. 이때 최적의 쇼트 스터브 길이를 찾기 위해, 직렬 궤환에 의한 잡음 지수와 이득 특성, 그리고 안정성에 대한 영향을 조사하였다. 설계된 회로의 특성은 주파수 8.9-9.5GHz에서 이득이 33dB이상, 잡음 지수가 1.2dB이하, 그리고 입출력 반사 계수가 각각 15dB와 14dB이하로 우수한 성능을 보였다. 따라서 제작된 소자가 고이득 X-밴드용 저잡음 증록기에 매우 적합한 소자임을 확인할 수 있었다.

• 한국의류산업학회지
• /
• 제16권1호
• /
• pp.145-152
• /
• 2014

The usage of textile-based sensors has increased due to their many advantages (compared to IT sensors) when applied to body assessment and comfort. Textile-based sensors have different detecting factors such as pressure, voltage, current and capacitance to investigate the characteristics. In this study, textile-based sensor fabrics with sheath-core type conductive yarns were produced and the relationship between capacitance changes and applied load was investigated. The physical and electric properties of textile-based sensor fabrics were also investigated under various laminating conditions. A textile based pressure sensor that uses a sheath-core conductive yarn to ensure the stability of the pressure sensor in the textile-based sensor (the physical structure of the reaction characteristic of the capacitance) is important for the stability of the initial value of the initial capacitance value outside the characteristic of the textile structural environment. In addition, a textile based sensor is displaced relative to the initial value of the capacitance change according to pressure changes in the capacitance value of the sensor due to the fineness of the high risk of noise generation. Changing the physical structure of the fabric through the sensor characteristic of the pressure sensor via the noise generating element of laminating (temperature, humidity, and static electricity) to cut off the voltage output element to improve the data reliability could be secured.