DOI QR코드

DOI QR Code

Signal Transmission Properties of the Inductive Coupler using the High Permeability Magnetic Materials

  • Published : 2006.04.01

Abstract

We observed the application possibility of inductive coupler for the underground high-voltage power line communication by means of analysis of signal transmission characteristics and magnetic properties on annealing temperatures for high-permeability Fe-base amorphous alloys. The best electromagnetic and transmission characteristics were shown in nano-crystalline precipitated alloy annealed at temperature $510^{\circ}C$. The transmission characteristics in the low-frequency band depend on permeability of magnetic core materials and its properties of high-frequency band can be improved by impedance matching. Using the high pass filter embedded in the coupler, other noise signal band except for communication signals could be cut off.

Keywords

References

  1. H. S. Kim, J. R. Kim, K. U. Kim, J. H. Lee, W. B. Byon, T. Y. Lee, and B. S. Park, 'Signal transmission characteristics of high permeability magnetic materials at the high current and frequency', KlEE, Summer conf., p. 1942, 2005
  2. H. S. Kim, J. R. Kim, K. U. Kim, J. H. Lee, W. B. Byon, T. Y. Lee, and B. S. Park, 'Properties of high permeability magnetic materials for signal transmission at the high frequency', Proc. 2005 Summer Conf. KIEEME, p. 272, 2005
  3. Y. Murata and T. Kimura, 'Inductive Coupling Unit and Bypass Toll for Power Line Communications', Technical Reports of Mitsubishi Electric Advanced Technology R&D Center, p. 18, 2001
  4. Bilal O., 'Design of broadband coupling circuits for powerline communication', 7th ISPLC Proceedings, p. 85, 2004
  5. IEEE, 'Guide for Power-line Carrier Applications', IEEE Standard 643-1980
  6. Petrus A. J. V. Rensburg and H. C. Ferreira, 'Practical aspects of component selection and circuit layout for modem and coupling circuitry', Proc. of 7th ISPLC-2003, Kyoto, Japan, p. 204, 2003
  7. K. H. J. Buschow, 'Handbook of magnetic materials', Vol. 10, p. 417, 1997

Cited by

  1. Development of Communication Joint Tools for Implementing a Legacy-line Communication System in a Train vol.19, pp.4, 2015, https://doi.org/10.6109/jkiice.2015.19.4.877
  2. Study on Design and Application of an Inductive Coupler for Power Transmission Line vol.23, pp.3, 2010, https://doi.org/10.4313/JKEM.2010.23.3.234
  3. A Powerline-based Legacy-line Communication System for Implementation of a Communication Network in Ship vol.19, pp.8, 2015, https://doi.org/10.6109/jkiice.2015.19.8.1831