DOI QR코드

DOI QR Code

4H-SiC(0001) Epilayer Growth and Electrical Property of Schottky Diode

4H-SiC(0001) Epilayer 성장 및 쇼트키 다이오드의 전기적 특성

  • 박치권 (동의대학교 전자세라믹스센터) ;
  • 이원재 (동의대학교 전자세라믹스센터) ;
  • ;
  • 신병철 (동의대학교 전자세라믹스센터)
  • Published : 2006.04.01

Abstract

A sublimation epitaxial method, referred to as the Closed Space Technique (CST) was adopted to produce thick SiC epitaxial layers for power device applications. We aimed to systematically investigate the dependence of SiC epilayer quality and growth rate during the sublimation growth using the CST method on various process parameters such as the growth temperature and working pressure. The etched surface of a SiC epitaxial layer grown with low growth rate $(30{\mu}m/h)$ exhibited low etch pit density (EPD) of ${\sim}2000/cm^2$ and a low micropipe density (MPD) of $2/cm^2$. The etched surface of a SiC epitaxial layer grown with high growth rate (above $100{\mu}m/h$) contained a high EPD of ${\sim}3500/cm^2$ and a high MPD of ${\sim}500/cm^2$, which indicates that high growth rate aids the formation of dislocations and micropipes in the epitaxial layer. We also investigated the Schottky barrier diode (SBD) characteristics including a carrier density and depletion layer for Ni/SiC structure and finally proposed a MESFET device fabricated by using selective epilayer process.

Keywords

References

  1. S. -S. Choi, 'Breakthrough m the Evolution of Semiconductor Sic', http://www.reseat.re.kr. 2005
  2. J.-G. Kim, K.-R. Ku, D.-J. Kim, S.-P. Kim, W.-J. Lee, B.-C. Shin, G.-H. Lee, and I.-S. Kim, 'SiC crystal growth by sublimation method with modification of crucible and insulation felt design', Mater. Sci. Forum, Vol. 483-485, p. 47, 2005
  3. M. Tuominen, R. Yakimova, M. Syvajarvi, and E. Janzen, 'Domain misorientation in sublimation grown 4H SiC epitaxial layers', Mater. Sci. Eng., Vol. 1, p. 168, 1999
  4. A. S. Segal, A. N. Vorob'ev, S. Yu. Karpov, E. N. Mokhov, M. G. Ramm, M, S. Ramm, A. D. Roenkov, Yu. A. Vodakov, and Yu. N. Makarov, 'Growth of silicon carbide by sublimation sandwich method in the atmosphere of inert gas', J. Cryst, Growth, Vol. 208, p. 431, 2000
  5. Lilov, D. S. K, Tairov, Y. M., Tsvetkov, V. F., and Chemov, M. V., 'Structural and morphological peculiarities of the epitaxial layers and monocrystals of silicon carbide highly doped by nitrogen', Phys. Status Solidi, A.37, p. 143, 1986
  6. T. Yoshida, Y. Nishio, S. K. Lilov, and S. Nishino 'Epitaxy of high quality SiC layers by CST', Mater. Sci. Forum, Vols. 264-268, p. 155, 1998
  7. A. Kakanakova-Georgieva, M. F. MacMillan, S. Nishino, R. Yakimova, and E. Janzen, 'The effects of growth conditions on dislocation density in SiC epi-Iayers produced by the sublimation epitaxy technique', Mater. Sci. Forum, Vol. 264-268, p. 147, 1998
  8. S. Nishino, T. Yoshida, and Y. Nishio, 'Epitaxial growth of high quality SiC by sublimation close space technique', Mat. Res. Soc. Syrnp. Proc., Vol. 483, p. 307 1998
  9. S. Yoneda, T. Furusho, H. Takagi, S. Ohta, and S. Nishino, 'Homepitaxial growth on 4H-SiC(03-38) face by sublimation close space techique', Mater. Sci. Forum, Vol. 483-485, p. 129, 2005 https://doi.org/10.4028/www.scientific.net/MSF.483-485.129
  10. M. Syvajarvi, R. Yakimova, T. Iakimov, and E. Janzen, 'Characterization of anisotropic step-bunching on as-grown SiC surface', Mater. Sci. Forum, Vol. 338-342, p. 375, 2000
  11. J. N. Su and A. J. Steckl, 'Fabrication of high voltage SiC schottky barrier diodes by Ni metallization', Inst. Phys, Conf. Ser., No. 142, Chap. 4, p. 697, 1996
  12. Gerold W. Neudeck, 'Modular series on solid state devices V ols II . The PN Junction Diode Second Edition', p. 127, 1998
  13. A. Itoh, T. Kimoto, and H. Matsunarni, 'Low power-loss 4H-SiC schottky rectifiers with high blocking voltage', Institute of Physics Conference Series No 142 chapter 4, p. 689, 1996 Mater. Sci., Vol. 15, No.1, p. 10, 2001

Cited by

  1. Electrical characteristics of polycrystalline 3C-SiC thin film diodes vol.16, pp.4, 2007, https://doi.org/10.5369/JSST.2007.16.4.259